Engineering topics

Yates, Emma L.

Publications and source records attributed to Yates, Emma L..

12 records

NASA NTRS2019

Testing and Improving a UAV-Based System Designed for Wetland Methane Source Measurements

Wetlands are the single highest emitting methane source category, but the magnitude of wetland fluxes remains difficult to fully characterize due to their large spatial extent and heterogeneity. Fluxes can vary with land surface conditions, vegetation type, and seasonal changes in environmental conditions. Unmanned aerial vehicles (UAVs) are an emerging platform to better characterize spatial variability in these natural ecosystems. While presenting some advantages over traditional techniques like towers and flux chambers, in that they are mobile vertically and horizontally, their use is still challenging, requiring continued improvement in sensor technology and field measurement approaches. In this work, we employ a small, fast response laser spectrometer on a Matrice 600 hexacopter. The system was previously deployed successfully for 40 flights conducted in a four-day period in 2018 near Fairbanks, Alaska. These flights revealed several potential areas for improvement, including: vertical positioning accuracy, the need for sensor health indicators, and approaches to deal with low wind speeds. An additional set of flights was conducted this year near Antioch in California. Flights were conducted several meters above ground up to 15-25 m in a curtain pattern. These curtains were flown both upwind and downwind of a tower site, allowing us to calculate a mass balance methane flux estimate that can be compared to eddy covariance fluxes from the tower. Testing will better characterize the extent to which altitude drifts in-flight and how GPS values compare with measurements from the onboard LIDAR, as well as the agreement between two-dimensional wind speed and direction on the ground versus measured onboard the UAV. Hardware improvements to the sensor and GPS are being considered to help reduce these sources of uncertainty. Results of this testing and how system performance relates to needs for quantifying wetland fluxes, will be presented.

Golston, Levi↗

NASA NTRS2018

Outcomes of 7 Years of Airborne Trace Gas Measurements over California and Nevada: The Alpha Jet Atmospheric eXperiment (AJAX)

The Alpha Jet Atmospheric eXperiment (AJAX) has been flying a scientific payload since January 2011 measuring ozone, carbon dioxide, methane, formaldehyde and meteorological parameters up to 9 kilometers. AJAX is located and operated from the San Francisco Bay Area and has flown a total of 229 flights, on a regular basis (approximately 3 per month) over all seasons cataloguing a long-term record of trace gas concentrations over California and Nevada. The AJAX project focuses on science questions which benefit from routine, frequent observations with flexible scheduling. This presentation will provide an overview of AJAX activities including a discussion of airborne measurements for: Long-Range Transport (LRT) and Stratosphere-to-Troposphere Transport (STT). Regular sampling by AJAX has aided identification of LRT and evidence of STT, which during spring and summer months are visible as elevated O3 laminae within airborne profiles. Some laminae have the ability to impact surface level air quality; Satellite validation - Regular AJAX missions include flights to Railroad Valley, NV in coordination with GOSAT (Greenhouse Gases Observing Satellite) and OCO-2 (Carbon Observatory-2) observations, and more recently to provide coincident measurements under TROPOMI (TROPOspheric Monitoring Instrument); The AJAX project is uniquely flexible to incorporate specialized flights with limited planning notice, such as sampling emissions from California wildfires. Nine wildfires have been sampled, with some more than once allowing to observe emission changes as the fire progresses; Pandora validation - Future work will include development of flight strategies for validation of ground based Pandora spectrometers.

Yates, Emma L.↗

NASA NTRS2018

Characterization of Wildfire Emissions in California: Analysis of Airborne Measurements of Trace Gases from 2013 to 2016

Biomass burning, which includes wildfires, prescribed, and agricultural fires, is an important source of trace gases and particles, and can influence air quality on a local, regional, and global scale. Biomass burning emissions are an important source of several key trace gases including carbon dioxide (CO2) and methane (CH4). With the threat of wildfire events increasing due to changes in land use, increasing population, and climate change, the importance of characterizing wildfire emissions is vital. In this work we characterize trace gas emissions from 9 wildfire events in California between 2013 – 2016, in some cases with multiple measurements performed during different burn periods of a specific wildfire. During this period airborne measurements of CO2, CH4, water vapor (H2O), ozone (O3), and formaldehyde (HCHO) were made by the Alpha Jet Atmospheric eXperiment (AJAX). Located in the Bay Area of California, AJAX is a joint effort between NASA Ames Research Center and H211, LLC. AJAX makes in-situ airborne measurements of trace gases 2-4 times per month, resulting in 229 flights to date since 2011. Results presented include emission ratios (ER) of trace gases measured by AJAX during fire flights, and comparisons of ERs are made for each fire, which differ in time, location, burning intensity, and fuel type. We also use our airborne measurements to compare with photochemical grid model results to assess model approximations of plume transport and chemical evolution from select wildfires.

Parworth, Caroline L.↗

NASA NTRS2018

Quantifying Methane Leak Emissions by Fused Airborne Imaging Spectroscopy with in Situ Surface Mobile and Airborne Observations of a California Producing Oil Field

Methane (CH4) emission budgets remain uncertain and are projected to grow as oil and gas production from short-lived wells increases and their subsequent transport through aging gas distribution networks. Orders-of-magnitude variations in temporal, spatial, and emission scales present a key challenge to leak detection and quantification. Also, the probability distributions for large and stochastic, leaky systems such as geological reservoirs (by natural migration-seeps) and petroleum production from those reservoirs remain largely unknown, needed to address current approach limitations. The scale of many petroleum systems favors remote sensing, but the sensitivity of such systems often precludes detection of weak emissions. Consequently, an accurate evaluation requires that the relative contribution from the emission "tails" of small leaks also be quantified, which is best carried out using high-sensitivity in situ methods. Fusion of remote sensing and in situ approaches leverages complementary capabilities to address these limitations. We show results from mobile surface (AMOG) and airborne in situ (AJAX) and thermal-infrared (TIR) hyperspectral imaging spectroscopy (Mako) data applied to a producing oil field in the California Central Valley near Bakersfield. AMOG is an automobile-based mobile lab that measures 13 trace gases, aerosol size distributions and vertical profiles, 3D winds and other meteorology, and atmospheric column measurements by solar spectroscopy at highway speeds. AJAX measures 5 trace gases and 3D winds at ~140 m/s. Mako is a broad-area TIR imaging spectrometer that can discriminate multiple gases present in each pixel acquired. In situ-derived, total field emissions were 31±16 Gg/yr CH4. This was compared with Mako-derived emissions from all plumes identified across the study site. We found that super-emitters were not the dominant emissions mode and the spatial pattern of plume locations from production infrastructure was correlated to geological structures.

Leifer, Ira↗

NASA NTRS2018

Proposed Trace Gas Measurements Over the Western United States for TROPOMI Validation

The Alpha Jet Atmospheric eXperiment (AJAX), located in the Bay Area of California, is a joint effort between NASA Ames Research Center and H211, LCC. AJAX makes in-situ airborne measurements of trace gases 2-4 times per month, resulting in over 216 flights since 2011. Current measurements include ozone (O3), carbon dioxide (CO2), methane (CH4), water (H2O), formaldehyde (HCHO), and meteorological measurements (i.e., ambient pressure, temperature, and 3D winds). Currently, the AJAX team is working to incorporate nitrogen dioxide (NO2) measurements with a Cavity Attenuated Phase Shift Spectrometer (CAPS). Successful science flights coincident with satellite overpasses have been performed since 2011 by the Alpha Jet, with more than 40 flights under the Greenhouse Observing SATellite (GOSAT) and several flights under the Orbiting Carbon Observatory-2 (OCO-2). Results from these flights, which have covered a range of different surfaces and seasonal conditions, will be presented. In-situ vertical profiles of O3, CO2, CH4, H2O, HCHO, and NO2 from the surface to 28,000 feet made by AJAX will also be valuable for satellite validation of data products obtained from the TROPOspheric Montoring Instrument (TROPOMI). TROPOMI is on board the Copernicus Sentinel-5 precursor (S5p) satellite, with level 2 products including O3, CO, CH4, HCHO, NO2, and aerosols.

Parworth, Caroline L.↗

NASA NTRS2017

Investigating Sources of Ozone over California Using AJAX Airborne Measurements and Models: Assessing the Contribution from Long Range Transport

High ozone (O3) concentrations at low altitudes (1.5e4 km) were detected from airborne Alpha Jet Atmospheric eXperiment (AJAX) measurements on 30 May 2012 off the coast of California (CA). We investigate the causes of those elevated O3 concentrations using airborne measurements and various models. GEOS-Chem simulation shows that the contribution from local sources is likely small. A back trajectory model was used to determine the air mass origins and how much they contributed to the O3 over CA. Low-level potential vorticity (PV) from Modern Era Retrospective analysis for Research and Applications 2 (MERRA-2) reanalysis data appears to be a result of the diabatic heating and mixing of airs in the lower altitudes, rather than be a result of direct transport from stratospheric intrusion. The Q diagnostic, which is a measure of the mixing of the air masses, indicates that there is sufficient mixing along the trajectory to indicate that O3 from the different origins is mixed and transported to the western U.S.The back-trajectory model simulation demonstrates the air masses of interest came mostly from the mid troposphere (MT, 76), but the contribution of the lower troposphere (LT, 19) is also significant compared to those from the upper troposphere/lower stratosphere (UTLS, 5). Air coming from the LT appears to be mostly originating over Asia. The possible surface impact of the high O3 transported aloft on the surface O3 concentration through vertical and horizontal transport within a few days is substantiated by the influence maps determined from the Weather Research and Forecasting Stochastic Time Inverted Lagrangian Transport (WRF-STILT) model and the observed increases in surface ozone mixing ratios. Contrasting this complex case with a stratospheric-dominant event emphasizes the contribution of each source to the high O3 concentration in the lower altitudes over CA. Integrated analyses using models, reanalysis, and diagnostic tools, allows high ozone values detected by in-situ measurements to be attributed to multiple source processes.

Ryoo, Ju-Mee↗

NASA NTRS2016

Airborne In-Situ Measurements of Formaldehyde Over California: First Results from the Compact Formaldehyde Fluorescence Experiment (COFFEE) Instrument

Formaldehyde (HCHO) is one of the most abundant oxygenated volatile organic compounds (VOCs) in the atmosphere, playing a role multiple atmospheric processes. Measurements of HCHO can be used to help quantify convective transport, the abundance of VOCs, and ozone production in urban environments. The Compact Formaldehyde FluorescencE Experiment (COFFEE) instrument uses Non-Resonant Laser Induced Fluorescence (NR-LIF) to detect trace concentrations of HCHO as part of the Alpha Jet Atmospheric eXperiment (AJAX) payload. Developed at NASA GSFC, COFFEE is a small, low maintenance instrument with a sensitivity of 100 pptv and a quick response time (1 sec). The COFFEE instrument has been customized to fit in an external wing pod on the Alpha Jet aircraft based at NASA ARC. The instrument can operate over a broad range of altitudes, from boundary layer to lower stratosphere, making it well suited for the Alpha Jet, which can access altitudes from the surface up to 40,000 ft. Results of the first COFFEE science flights preformed over the California's Central Valley will be presented. Boundary layer measurements and vertical profiles in the tropospheric column will both be included. This region is of particular interest, due to its elevated levels of HCHO, revealed in satellite images, as well as its high ozone concentrations. In addition to HCHO, the AJAX payload includes measurements of atmospheric ozone, methane, and carbon dioxide. Formaldehyde is one of the few urban pollutants that can be measured from space. Plans to compare in-situ COFFEE data with satellite-based HCHO observations such as those from OMI (Aura) and OMPS (SuomiNPP) will also be presented.

ozone↗

NASA NTRS2016

Airborne In-Situ Measurements of Formaldehyde over California: First Results from the Compact Formaldehyde Fluorescence Experiment (COFFEE) Instrument

coffee↗

NASA NTRS2016

Investigating Ozone Sources in California Using AJAX Airborne Measurements and Models: Implications for Stratospheric Intrusion and Long Range Transport

High ozone concentrations at low altitudes near the surface were detected from airborne Alpha Jet Atmospheric eXperiment (AJAX) measurements on May 30, 2012. We investigate the causes of the elevated ozone concentrations using the airborne measurements and various models. GEOSchem and WRF-STILT model simulations show that the contribution from local sources is small. From MERRA reanalysis, it is found that high potential vorticity (PV) is observed at low altitudes. This high PV appears to be only partially coming through the stratospheric intrusions because the air inside the high PV region is moist, which shows that mixing appears to be enhanced in the low altitudes. Considering that diabatic heating can also produce high PV in the lower troposphere, high ozone is partially coming through stratospheric intrusion, but this cannot explain the whole ozone concentration in the target areas of the western U.S. A back-trajectory model is utilized to see where the air masses originated. The air masses of the target areas came from the lower stratosphere (LS), upper (UT), mid- (MT), and lower troposphere (LT). The relative number of trajectories coming from LS and UT is low (7.7% and 7.6%, respectively) compared to that from LT (64.1%), but the relative ozone concentration coming from LS and UT is high (38.4% and 20.95%, respectively) compared to that from LT (17.7%). The air mass coming from LT appears to be mostly coming from Asia. Q diagnostics show that there is sufficient mixing along the trajectory to indicate that ozone from the different origins is mixed and transported to the western U.S. This study shows that high ozone concentrations can be detected by airborne measurements, which can be analyzed by integrated platforms such as models, reanalysis, and satellite data.

gas composition↗

NASA NTRS2015

Investigation of Ozone Sources in California Using AJAX Airborne Measurements and Models: Implications for Stratospheric Intrusion and Long Range Transport

High ozone concentrations at low altitudes near the surface were detected from airborne Alpha Jet Atmospheric eXperiment (AJAX) measurements on May 30, 2012. We investigate the causes of the elevated ozone concentrations using the airborne measurements and various models. GEOS-chem and WRF-STILT model simulations show that the contribution from local sources is small. From MERRA reanalysis, it is found that high potential vorticity (PV) is observed at low altitudes. This high PV appears to be only partially coming through the stratospheric intrusions because the air inside the high PV region is moist, which shows that mixing appears to be enhanced in the low altitudes. Considering that diabatic heating can also produce high PV in the lower troposphere, high ozone is partially coming through stratospheric intrusion, but this cannot explain the whole ozone concentration in the target areas of the western U.S. A back-trajectory model is utilized to see where the air masses originated. The air masses of the target areas came from the lower stratosphere (LS), upper (UT), mid- (MT), and lower troposphere (LT). The relative number of trajectories coming from LS and UT is low (7.7 and 7.6, respectively) compared to that from LT (64.1), but the relative ozone concentration coming from LS and UT is high (38.4 and 20.95, respectively) compared to that from LT (17.7). The air mass coming from LT appears to be mostly coming from Asia. Q diagnostics show that there is sufficient mixing along the trajectory to indicate that ozone from the different origins is mixed and transported to the western U.S. This study shows that high ozone concentrations can be detected by airborne measurements, which can be analyzed by integrated platforms such as models, reanalysis, and satellite data.

low altitude↗

NASA NTRS2015

Airborne Observations of Carbon Dioxide and Methane Emission Ratios from the Yosemite Rim Wildfire, California

This paper presents airborne in situ measurements of carbon dioxide (CO2) and methane (CH4) downwind of an exceptionally large wildfire, the Rim Fire, near Yosemite, California, during two flights. Data analyses are discussed in terms of emission ratios (ER) and emission factors (EF) and are compared to previous studies. CH4 ER’s were 7.5-7.9 parts per billion (ppb) CH4 for every 1 part per million (ppm) of CO2 (ppb CH4 (ppm CO2)(exp.-1)) on 29 August 2013 and 14.2-16.7 ppb CH4 (ppm CO2)(exp. -1) on 10 September 2013. This study measured only CO2 and CH4; however, estimated emission factors (EEF’s) are used as rough estimates of EF’s of CO2 and CH4 and are in close agreement with EF’s reported in previous studies. In the western US, wildfires dominate over prescribed fires, contributing to atmospheric trace gas budgets and regional and local air pollution. Limited sampling of emissions from wildfires means western US emission estimates rely largely on data from prescribed fires, which may not be a suitable proxy for wildfire emissions. Given the magnitude of the Yosemite Rim wildfire, the impacts it had on regional air quality and the limited sampling of wildfire emissions in the western US to date, this study provides a valuable measurement dataset and may have important implications for forestry and regional air quality management.

Yates, Emma L.↗

NASA NTRS2013

Analyzing Carbon Dioxide and Methane Emissions in California Using Airborne Measurements and Model Simulations

Greenhouse gas (GHG) concentrations have increased over the past decades and are linked to global temperature increases and climate change. These changes in climate have been suggested to have varying effects, and uncertain consequences, on agriculture, water supply, weather, sea-level rise, the economy, and energy. To counteract the trend of increasing atmospheric concentrations of GHGs, the state of California has passed the California Global Warming Act of 2006 (AB-32). This requires that by the year 2020, GHG (e.g., carbon dioxide (CO2) and methane (CH4)) emissions will be reduced to 1990 levels. To quantify GHG fluxes, emission inventories are routinely compiled for the State of California (e.g., CH4 emissions from the California Greenhouse Gas Emissions Measurement (CALGEM) Project). The major sources of CO2 and CH4 in the state of California are: transportation, electricity production, oil and gas extraction, cement plants, agriculture, landfills/waste, livestock, and wetlands. However, uncertainties remain in these emission inventories because many factors contributing to these processes are poorly quantified. To alleviate these uncertainties, a synergistic approach of applying air-borne measurements and chemical transport modeling (CTM) efforts to provide a method of quantifying local and regional GHG emissions will be performed during this study. Additionally, in order to further understand the temporal and spatial distributions of GHG fluxes in California and the impact these species have on regional climate, CTM simulations of daily variations and seasonality of total column CO2 and CH4 will be analyzed. To assess the magnitude and spatial variation of GHG emissions and to identify local “hot spots”, airborne measurements of CH4 and CO2 were made by the Alpha Jet Atmospheric eXperiment (AJAX) over the San Francisco Bay Area (SFBA) and San Joaquin Valley (SJV) in January and February 2013 during the Discover-AQ-CA study. High mixing ratios of GHGs were observed in-flight with a high degree of spatial variability. To provide an additional method to quantify GHG emissions, and analyze AJAX measurement data, the GEOS-Chem CTM is used to simulate SFBA/SJV GHG measurements. A nested-grid version of GEOS-Chem will be applied and utilizes varying emission inventories and model parameterizations to simulate GHG fluxes/emissions. The model considers CO2 fluxes from fossil fuel use, biomass/biofuel burning, terrestrial and oceanic biosphere exchanges, shipping and aviation, and production from the oxidation of carbon monoxide, CH4, and non-methane volatile organic carbons. The major sources of CH4 simulated in GEOS-Chem are domesticated animals, rice fields, natural gas leakage, natural gas venting/flaring (oil production), coal mining, wetlands, and biomass burning. Preliminary results from the comparison between available observations (e.g., AJAX and CALGEM CH4 emission maps) and GEOS-Chem results will be presented, along with a discussion of CO2 and CH4 source apportionment and the use of the GEOS-Chem-adjoint to perform inverse GHG modeling.

Johnson, Matthew S.↗