Search NASA⌕ Search

Engineering topics

Yee, Jeng-Hwa

Publications and source records attributed to Yee, Jeng-Hwa.

A 2 Thz Schottky Solid-State Heterodyne Receiver for Atmospheric Studies

Obtaining temperature, pressure, and composition profiles along with wind velocities in the Earth's thermosphere/ionosphere system is a key NASA goal for understanding our planet. We report on the status of a technology development effort to build an all-solid-state heterodyne receiver at 2.06 terahertz that will allow the measurement of the 2.06 terahertz [OI] line for altitudes greater than 100 kilometers. The receiver front end features low-parasitic Schottky diode mixer chips that are driven by a local oscillator (LO) source using Schottky diode based multipliers. The multiplier chain consists of a 38 gigahertz oscillator followed by a set of three cascaded triplers at 114 gigahertz, 343 gigahertz and 1.03 terahertz.

Treuttel, Jeanne↗

THz Limb Sounder (TLS) for Lower Thermospheric Wind, Oxygen Density, and Temperature

Neutral winds are one of the most critical measurements in the lower thermosphere and E region ionosphere (LTEI) for understanding complex electrodynamic processes and ion-neutral interactions. We are developing a high-sensitivity, low-power, noncryogenic 2.06 THz Schottky receiver to measure wind profiles at 100-140 km. The new technique, THz limb sounder (TLS), aims to measure LTEI winds by resolving the wind-induced Doppler shift of 2.06 THz atomic oxygen (OI) emissions. As a transition between fine structure levels in the ground electronic state, the OI emission is in local thermodynamic equilibrium(LTE) at altitudes up to 350km. This LTE property, together with day-and-night capability and small line-of-sight gradient, makes the OI limb sounding a very attractive technique for neutral wind observations. In addition to the wind measurement, TLS can also retrieve [OI] density and neutral temperature in the LTEI region. TLS leverages rapid advances in THz receiver technologies including subharmonically pumped (SHP)mixers and Schottky-diode-based power multipliers. Current SHP Schottky receivers have produced good sensitivity for THz frequencies at ambient environment temperatures (120-150 K), which are achievable through passively cooling in spaceflight. As an emerging technique, TLS can fill the critical data gaps in the LTEI neutral wind observations to enable detailed studies on the coupling and dynamo processes between charged and neutral molecules.

wind profiles↗

Diagnosis of Middle Atmosphere Climate Sensitivity by the Climate Feedback Response Analysis Method

We present a new method to diagnose the middle atmosphere climate sensitivity by extending the Climate Feedback-Response Analysis Method (CFRAM) for the coupled atmosphere-surface system to the middle atmosphere. The Middle atmosphere CFRAM (MCFRAM) is built on the atmospheric energy equation per unit mass with radiative heating and cooling rates as its major thermal energy sources. MCFRAM preserves the CFRAM unique feature of an additive property for which the sum of all partial temperature changes due to variations in external forcing and feedback processes equals the observed temperature change. In addition, MCFRAM establishes a physical relationship of radiative damping between the energy perturbations associated with various feedback processes and temperature perturbations associated with thermal responses. MCFRAM is applied to both measurements and model output fields to diagnose the middle atmosphere climate sensitivity. It is found that the largest component of the middle atmosphere temperature response to the 11-year solar cycle (solar maximum vs. solar minimum) is directly from the partial temperature change due to the variation of the input solar flux. Increasing CO2 always cools the middle atmosphere with time whereas partial temperature change due to O3 variation could be either positive or negative. The partial temperature changes due to different feedbacks show distinctly different spatial patterns. The thermally driven globally averaged partial temperature change due to all radiative processes is approximately equal to the observed temperature change, ranging from 0.5 K near 70 km from the near solar maximum to the solar minimum.

MCFRAM↗

Development of an Instrument Performance Simulation Capability for an Infrared Correlation Radiometer for Troposheric Carbon Monoxide Measurements From Geo

We present the progress toward an analytical performance model of a 2.3 micron infrared correlation radiometer (IRCRg) prototype subsystem for a future geostationary space-borne instrument. The prototype is designed specifically to measure carbon monoxide (CO) from geostationary orbit. NASA's Geostationary Coastal and Air Pollution Events (GEO-CAPE) mission, one of the United States Earth Science and Applications Decadal Survey missions, specifies the use of infrared correlation radiometry to measure CO in two spectral regions for this mission. GEO-CAPE will use the robust IRCR measurement technique at geostationary orbit, nearly 50 times farther away than the Terra/MOPITT orbit, to determine hourly changes in CO across a continental domain. The abundance of CO in Earth's troposphere directly affects the concentration of hydroxyl, which regulates the lifetimes of many tropospheric pollutants. In addition, CO is a precursor to ozone formation; CO is used as a tracer to study the transport of global and regional pollutants; and CO is used as an indicator of both natural and anthropogenic air pollution sources and sinks. We have structured our development project to enable rapid evaluation of future spaceborne instrument designs. The project is part of NASA's Instrument Incubator Program. We describe the architecture of the performance model and the planned evaluation of the performance model using laboratory test data.

OsowskiNeil, Doreen↗

Remote measurements of upper atmospheric density and temperature

A suborbital experiment was designed to study the photochemistry of the mesosphere by observing simultaneously the airglow emissions with in-situ minor species number density profiles. The experiment was very successful and some preliminary results have already been reported in various scientific meetings. Two scientific papers are currently in the process of final preparation for submission for publication. In this final project report, we will first give a background description of the experiment and follow by the summaries of the scientific papers currently being prepared.

Yee, Jeng-Hwa↗

Aeronomical determinations of the quantum yields of O (1S) and O (1D) from dissociative recombination of O2(+)

Data from the visible-airglow experiment on the Atmosphere Explorer-E satellite have been used to determine the quantum yields of O (1S) and O (1D) from the dissociative recombination of O2(+) based on a constant total recombination rate from each vibrational level. A range of values between 0.05 and 0.18 has been obtained for the quantum yield of O (1S) and shows a positive correlation with the extent of the vibrational excitation of O2(+). The quantum yield of O (1D) has been measured to be 0.9 + or - 0.2, with no apparent dependence on the vibrational distribution of O2(+).

Yee, Jeng-Hwa↗

Image plane detector spectrophotometer - Application to O2 atmospheric band nightglow

A new variety of low resolution spectrometer is described. This device, an image plane detector spectrophotometer, has high sensitivity and modest resolution sufficient to determine the rotational temperature and brightness of molecular band emissions. It uses an interference filter as a dispersive element and a multichannel image plane detector as the photon collecting device. The data analysis technqiue used to recover the temperature of the emitter and the emission brightness is presented. The atmospheric band of molecular oxygen is used to illustrate the use of the device.

Luo, Mingzhao↗

The Visible Airglow Experiment - A review

Contributions of the Visible Airglow Experiment (VAE) to the understanding of various airglow and auroral processes are reviewed. The impact of instrumental design and operation on the observations is discussed, and emphasis is placed on the relationship between observations and inversion for optical measurements of light emissions from a diffuse medium. VAE data are used to explain the physical mechanisms responsible for the production and destruction of excited species including O(+)(1P), O(1D), O(1S), N(2D), and Mg(+)2P1/2.

Hays, Paul B.↗

Non-thermal distribution of O(1D) atoms in the night-time thermosphere

The 6300 A O(1D-3P) emission has been used for many years to remotely monitor the thermospheric temperature from the Doppler width of its line profile. The O(1D) atoms in the nighttime thermosphere are initially produced by the dissociative recombination of O2(+) ions with kinetic energy much greater than the thermal energy of the ambient neutrals. The validity of the technique to monitor neutral ambient temperature by measuring O(1D) 6300 A emission depends on the degree of thermalization of the O(1D) atoms. The object of this study is to calculate the velocity distribution of the O(1D) atoms and to examine the effect of nonthermal distribution on the nighttime thermospheric neutral temperature determined.

Yee, Jeng-Hwa↗

Energy transfer of O(D-1) atoms in collision with O(P-3) atoms

Calculations are carried out of the elastic scattering and excitation exchange cross-sections in collisions of O(D-1) and O(P-3) atoms, which determine the degree of thermalization of the O(D-1) atoms produced by dissociative recombination in the thermosphere. The effective elastic scattering and excitation exchange cross-sections are calculated to be 1.55 x 10 to the -15th and 6.25 x 10 to the -16th sq cm, respectively, at a relative collision energy of 1.0 eV. The mutual diffusion coefficient between O(D-1) and O(P-3) atoms is also presented.

Yee, Jeng-Hwa↗

Thermospheric production of O(1S) by dissociative recombination of vibrationally excited O2(+)

High spectral resolution line profiles at 5577 A of the nighttime, F-region O(1S) emission measured by the Fabry-Perot interferometer on board the Dynamics Explorer satellite are analyzed using a continuous O(1S) relaxation model. The model is an improvement over the previous model of Killeen and Hays (1981) in that energy loss via elastic collision is considered in addition to the single collision, excitation exchange thermalization process. The results show that the active channel for O(1S) production is capture into the 1Sigma(+)u repulsive state of O2 and that the main contributor to its production is the dissociative recombination of O2(+) ions in vibrational levels v = 1 and 2 in agreement with the quantal calculations of Guberman (1983).

Yee, Jeng-Hwa↗