Search NASA⌕ Search

Engineering topics

Yen, S. P. S.

Publications and source records attributed to Yen, S. P. S..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Expanding the Capabilities of the JPL Electronic Nose for an International Space Station Technology Demonstration

An array-based sensing system based on polymer/carbon composite conductometric sensors is under development at JPL for use as an environmental monitor in the International Space Station. Sulfur dioxide has been added to the analyte set for this phase of development. Using molecular modeling techniques, the interaction energy between SO2 and polymer functional groups has been calculated, and polymers selected as potential SO2 sensors. Experiment has validated the model and two selected polymers have been shown to be promising materials for SO2 detection.

electronic noses↗
NASA NTRS1993

The Investigation of 6mu Biaxially Oriented Polyethylene 2, 6, -Naphthalate As a Possible Dielectric For Pulse Power Capacitors

The introduction of polythylene -2, 6-Naphthalate (PEN) semicrystalline film with thicknesses of 0.9mu, 1.5mu, 4.0Mu and community. Its unique chemical and high temparterure stability, as well as superior thermo-mechanical properties allow ultra thin ( 2mu) PEN film to be processed into miniature multilayer chip capacitors for surface mount technology (SMT) application that can be used with standard soldering techniques.

Polythylene -2 Ultra thin PEN film Dielectric cons↗
NASA NTRS1990

Effect of structure and morphology on thermal and electrical properties of polycarbonate film capacitors

Research is reported to identify polycarbonate (PC) film characteristics and fabrication procedures which extend the reliable performance range of PC capacitors to 125 C without derating, and establish quality control techniques and transfer technology to US PC film manufacturers. The approach chosen to solve these problems was to develop techniques for fabricating biaxially oriented (BX) 2 microns or thinner PC film with a low dissipation factor up to 140 C; isotropic dimensional stability; high crystallinity; and high voltage breakdown strength. The PC film structure and morphology was then correlated to thermal and electrical capacitor behavior. Analytical techniques were developed to monitor film quality during capacitor fabrication, and as a result, excellent performance was demonstrated during initial capacitor testing.

Yen, S. P. S.↗
NASA NTRS1988

Capacity decline of ambient temperature secondary lithium battery

The use of ambient temperature secondary lithium cells is limited primarily because of the poor cycle life performance. Much of the cell capacity is irreversibly lost upon cycling. Studies have been undertaken to understand the problem of capacity decline. Experimental Li-TiS2 cells were fabricated and tested for their cycle life performance. Cells were disassembled at different stages of cycle life, and cell active components were analyzed by various analytical techniques. The results of this study indicate that all the cell's active components/materials are undergoing degradation. Details of the experiments carried out and the results obtained are described.

Shen, D. H.↗
NASA NTRS1987

Elastomeric binders for Li-SOCl2 cell carbon electrodes

Nonoptimized elastomer bonded carbon electrodes made with 100-percent compressed Gulf Acetylene Black have demonstrated performance comparable to that of optimized Teflon bonded carbon electrodes, made from the same carbon, when tested at 1-10 mA/sq cm, at 24 and -26 C. The enhanced performance of elastomer bonded carbon electrodes appears to be due to the more uniform utilization of the carbon electrode to store insoluble discharge products, as compared to Teflon bonded carbon electrodes. With even minimal optimization of elastomer bonded carbon electrodes, significant improvement in Li-SOCl2 cell performance can be expected.

Carter, B. J.↗
NASA NTRS1986

Examination of design options for 35 Ah ambient temperature Li-TiS sub 2 cells

The Jet Propulsion Laboratory is actively engaged in the development of ambient temperature rechargable lithium cells for future NASA geosynchronous Earth orbit (GEO) missions. To achieve these ambitious goals, Li-TiS2, Li-MoS3, and Li-V6O13 systems were examined in detail. Among these three, the Li-TiS2 system has shown the longest life cycle and highest rate capability. Experimental Li-TiS2 batteries (10.5 V, 0.4 Ah) developed in-house have completed eight simulated and accelerated GEO seasons successfully. Inview of the encouraging results, the design options were examined for a scaled-up Li-TiS2 cell. It is hoped that the results of these studies will provide guidelines for prioritizing the research efforts and guiding the selection of optimized materials. Designs for 35 Ah Li-TiS2 cell were examined because present day geosynchronous satellites are powered by batteries of 35 Ah capacity. A computer program was developed to evaluate the influence of various design parameters on the specific energy and the rate capability of the cells.

Shen, D. H.↗
NASA NTRS1986

The design analysis of a rechargeable lithium cell for space applications

Ambient temperature rechargeable lithium batteries are needed by NASA for advanced space power applications for future missions. Specific energies of not less than 100 Wh/kg and long cycle life are critical performance goals. A design analysis of a 35 Ah Li-TiS2 cell was carried out using literature and experimental data to identify key design parameters governing specific energy. It is found that high specific energies are achievable in prismatic cells, especially with the use of advanced hardware materials. There is a serious need for a greatly expanded engineering database in order to enable more quantitative design analysis.

Subba Rao, S.↗
NASA NTRS1986

Performance and properties of arsenic passivated lithium-titanium disulfide cells

In order to inhibit chemical degradation associated with the lithium-electrolyte interaction in ambient temperature lithium cells, an attempt was made to synthetically passivate the anode via ion implantation of arsenic. Solvent reduction is reduced although salt reaction with lithium is still present. The performance of the Li-TiS2 cell differs from those with standard electrodes, but further work is necessary to clarify the efficacy of this mode of passivation.

Yen, S. P. S.↗
NASA NTRS1985

Improved Electrodes for Lithium Cells

Chlorinated elastomeric binder improves cell mechanical and electrical characteristics. Substituted for PTFE binder, chlorinated polyethylene rubber allows high cell-discharge rates and higher stored energy per unit volume. In addition, it costs about one-eighth as much as PTFE.

Yen, S. P. S.↗
NASA NTRS1985

High-Cycle-Life Lithium Cell

Lithium-anode electrochemical cell offers increased number of charge/ discharge cycles. Cell uses components selected for compatibility with electrolyte solvent: These materials are wettable and chemically stable. Low vapor pressure and high electrochemical stability of solvent improve cell packaging, handling, and safety. Cell operates at modest temperatures - less than 100 degrees C - and is well suited to automotive, communications, and other applications.

Yen, S. P. S.↗
NASA NTRS1985

Elastomeric Cathode Binder

Soluble copolymer binder mixed with cathode material and solvent forms flexible porous cathode used in lithium and Ni/Cd batteries. Cathodes prepared by this process have lower density due to expanding rubbery binder and greater flexibility than conventional cathodes. Fabrication procedure readily adaptable to scaled-up processes.

Yen, S. P. S.↗
NASA NTRS1985

Capacity-cycle life behavior in secondary lithium cells

The practical utilization of high energy density rechargeable lithium cells is dependent upon maintaining high capacity for the duration of the required cycle life. However, a critical, yet generic problem with room temperature lithium systems is that the capacity often declines considerably during the early stages of cycling. The results of our studies are reported on electrolyte degradation which is observed after cells have undergone 300 and 700 deep cycles with 3-methylsulfolane- and 2-methyltetrahydrofuran-LiAsF6 electrolytes, respectively.

Somoano, R. B.↗
NASA NTRS1985

Review of the NASA Voyager spacecraft polycarbonate capacitor failure incident

The premission failure of a Voyager spacecraft capacitor has prompted an investigation into the use of polycarbonate capacitors in high impedance circuits, during which capacitor failures were induced by thermal cycling together with extended periods at high temperature. Measurement of leakage path temperature coefficients indicates that there are two distinct leakage types whose mechanisms are complicated by movement within the capacitor during temperature changes. A novel system for pulse detection during capacitor burn-in and ramp testing has proven to be beneficial.

Ott, F. M.↗