Search NASA⌕ Search

Engineering topics

Yevgeny Derimian

Publications and source records attributed to Yevgeny Derimian.

Thermal Infrared Dust Optical Depth and Coarse-Mode Effective Diameter Over Oceans Retrieved From Collocated MODIS and CALIOP Observations

In this study, we developed a novel algorithm based on the collocated Moderate Resolution Imaging Spectroradiometer (MODIS) thermal infrared (TIR) observations and dust vertical profiles from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) to simultaneously retrieve dust aerosol optical depth at 10 µm (DAOD10μm) and the coarse-mode dust effective diameter (Deff) over global oceans. The accuracy of the Deff retrieval is assessed by comparing the dust lognormal volume particle size distribution (PSD) corresponding to retrieved Deff with the in-situ measured dust PSDs from the AER-D, SAMUM-2 and SALTRACE field campaigns through case studies. The new DAOD10μm retrievals were evaluated first through comparisons with the collocated DAOD10.6μm retrieved from the combined Imaging Infrared Radiometer (IIR) and CALIOP observations from our previous study (Zheng et al. 2022). The pixel-to-pixel comparison of the two DAOD retrievals indicates a good agreement (R~0.7) and a significant reduction of (~50%) retrieval uncertainties largely thanks to the better constraint on dust size. In a climatological comparison, the seasonal and regional (5°×2°) mean DAOD10um retrievals based on our combined MODIS and CALIOP method are in good agreement with the two independent Infrared Atmospheric Sounding Interferometer (IASI) products over three dust transport regions (i.e., North Atlantic (NA; R = 0.9), Indian Ocean (IO; R = 0.8) and North Pacific (NP; R = 0.7)). Using the new retrievals from 2013 to 2017, we performed a climatological analysis of coarse mode dust Deff over global oceans. We found that dust Deff over IO and NP are up to 20% smaller than that over NA. Over NA in summer, we found a ~50% reduction of the number of retrievals with Deff > 5 μm from 15°W to 35°W and a stable trend of Deff average at 4.4 μm from 35°W throughout the Caribbean Sea (90°W). Over NP in spring, only ~5% of retrieved pixels with Deff > 5 μm are found from 150°E to 180°, while the mean Deff remains stable at 4.0 μm throughout eastern NP. To our best knowledge, this study is the first to retrieve both DAOD and coarse-mode dust particle size over global oceans for multiple years. This retrieval dataset provides insightful information for evaluating dust long-wave radiative effects and coarse mode dust particle size in models.

dust optical depth↗

Extensive Characterization of Aerosol Optical Properties and Chemical Component Concentrations: Application of the GRASP/Component Approach to Long-term AERONET Measurements

A recently developed GRASP/Component approach (GRASP: Generalized Retrieval of Atmosphere and Surface Properties) was applied to AERONET (Aeronet Robotic Network) sun photometer measurements in this study. Unlike traditional aerosol component retrieval, this approach allows the inference of some information about aerosol composition directly from measured radiance, rather than indirectly through the inversion of optical parameters, and has been integrated into the GRASP algorithm. The newly developed GRASP/Component approach was applied to 13 AERONET sites for different aerosol types under the assumption of aerosol internal mixing rules to analyze the characteristics of aerosol components and their distribution patterns. The results indicate that the retrievals can characterize well the spatial and temporal variability of the component concentration for different aerosol types. A reasonable agreement between GRASP BC retrievals and MERRA-2 BC products is found for all different aerosol types. In addition, the relationships between aerosol component content and aerosol optical parameters such as aerosol optical depth (AOD), fine-mode fraction (FMF), absorption Ångström exponent (AAE), scattering Ångström exponent (SAE), and single scattering albedo (SSA) are also analyzed for indirect verifying the reliability of the component retrieval. It was demonstrated the GRASP/Component optical retrievals are in good agreement with AERONET standard products [e.g., correlation coefficient (R) of 0.93–1.0 for AOD, fine-mode AOD (AODF), coarse-mode AOD (AODC) and Ångström exponent (AE); R = ~ 0.8 for absorption AOD (AAOD) and SSA; RMSE (root mean square error) < 0.03 for AOD, AODF, AODC, AAOD and SSA]. Thus, it is demonstrated the GRASP/Component approach can provide aerosol optical products with comparable accuracy as the AERONET standard products from the ground-based sun photometer measurements as well as some additional important inside on aerosol composition.

Xindan Zhang↗

Variability of Lidar-Derived Particle Properties Over West Africa Due to Changes in Absorption: Towards an Understanding

Measurements performed in western Africa (Senegal) during the SHADOW field campaign are analyzed to show that spectral dependence of the imaginary part of the complex refractive index (CRI) of dust can be revealed by lidar-measured particle parameters. Observations in April 2015 provide good opportunity for such study, because, due to high optical depth of the dust, exceeding 0.5, the extinction coefficient could be derived from lidar measurements with high accuracy and the contribution of other aerosol types, such as biomass burning, was negligible. For instance, in the second half of April 2015, AERONET observations demonstrated a temporal decrease in the imaginary part of the CRI at 440 nm from approximately 0.0045 to 0.0025. This decrease is in line with a change in the relationship between the lidar ratios (the extinction-to-backscattering ratio) at 355 and 532 nm (S(355) and S(532)). For instance in the first half of April, S(355)∕S(532) is as high as 1.5 and the backscatter Angstrom exponent, A(β), is as low as −0.75, while after 15 April S(355)/S(532)=1.0 and A(β) is close to zero. The aerosol depolarization ratio δ(532) for the whole of April exceeded 30 % in the height range considered, implying that no other aerosol, except dust, occurred. The performed modeling confirmed that the observed S(355)∕S(532) and Aβ values match the spectrally dependent imaginary part of the refractive index as can be expected for mineral dust containing iron oxides. The second phase of the SHADOW campaign was focused on evaluation of the lidar ratio of smoke and estimates of its dependence on relative humidity (RH). For five studied smoke episodes the lidar ratio increases from 44±5 to 66±7 sr at 532 nm and from 62±6 to 80±8 sr at 355 nm, when RH varied from 25 % to 85 %. Performed numerical simulations demonstrate that observed ratio S(355)∕S(532), exceeding 1.0 in the smoke plumes, can indicate an increase in the imaginary part of the smoke particles in the ultraviolet (UV) range.

Lidar-Derived Particle Properties↗

TPSAS-NF1676L-27509-DND

The information about composition of aerosols has a great importance for monitoring and understanding of climate and environment dynamics. Such information can be obtained using situ measurements or chemical transport models. However, in situ sampling has limited spatial and temporal coverage, while estimations have large uncertainties. The present work enables the monitoring of aerosol chemical species from space-borne observations, providing observationally-based results with spatial and temporal coverage. Following the ideas of Schuster et al.(2005, 2009, 2016), we retrieve chemical composition directly from satellite observations without intermediate retrieval of the refractive index (in contrast with Schuster's approach). This approach is expected to reduce the influence of modeling uncertainties, and to provide additional constraints in situations where remote sensing observations do not have enough spectral sensitivity to refractive index. One of principal difficulties is the identification of an adequate model for linking refractive index to chemical composition. Therefore, the initial effort of this work has focused on identifying an optimal physico-chemistry to refractive index conversion model. With that purpose, we first tested the retrieval approach using a simplified volume-weighting model and updated by the Maxwell Garnett mixing model. This concept was incorporated into the GRASP algorithm designed to retrieve an extended set of atmospheric parameters from remote sensing observations. Then a series of sensitivity tests using synthetic data of POLDER/PARASOL were conducted, and followed by inversion of real PARASOL observations over Africa. The sensitivity tests showed that these two models allow the retrieval to distinguish amongst the assumed chemical species. Results obtained from real PARASOL data demonstrated good agreement with the optical characteristics provided by AERONET. In addition, the obtained patterns of chemical component distribution agreed with known physical expectations. We also compared the chemical composition retrievals to GOCART model simulations and obtained good consistencies.

Lei Li↗

The Tables of Aerosol Optics (TAO) Project

The Table of Aerosol Optics (TAO) project is a community repository of optics computations (extinction, absorption, single-scatter albedo, lidar ratio, etc) that are useful for global models and remote sensing applications. TAO expands upon historical efforts (e.g., Hess et al., 1998) by building an open database that uses recent measurements and new computational techniques for non-spherical particles. The ‘open’ aspect of TAO is important, since the size distributions, hygroscopicities, refractive indices, and morphological recommendations of today will undoubtedly yield to different values in the future; the open framework of TAO allows scientists to keep adding new computations to the database as the science evolves. TAO is meant to be a community repository where specialists can put their computations for other scientists to use. So for instance, some groups are advancing new techniques that can accommodate complex fractal aggregates of black carbon, other groups are working on realistic irregular shapes for mineral dust, and different groups are updating the hygroscopicity of various aerosol types using new techniques. The TAO database gives these scientists a place to distribute their products. As TAO grows, modelers and remote sensing specialists will look to TAO as a place to find a wide variety of choices for testing. Meanwhile, global modelers can also use TAO to lobby for new tables that accommodate their needs. Eventually, TAO will provide mass extinction coefficients, mass absorption coefficients, lidar ratios, etc., at popular remote sensing and global modeling wavelengths (0.25-40 µm) for all pertinent species (sulfate, sea salt, BC, OC, BrC, dust, etc.). TAO will also accept computations for aerosol ‘type’ (e.g., biomass burning, urban, background, etc.) that may include regional and seasonal variability. Multiple tables may be created for each species or type to account for the multiple valid size distributions, hygroscopicities, complex refractive indices, and shapes that can be found in the literature.

Greg Schuster↗