Search NASA⌕ Search

Engineering topics

Yi Liu

Publications and source records attributed to Yi Liu.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

FUN3D Manual: 14.1

This manual describes the installation and execution of FUN3D version 14.1, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver may be used for formal design optimization, error estimation, and mesh adaptation. FUN3D also offers a reacting, real-gas capability and provides GPU acceleration of many common simulation options.

William K Anderson↗
NASA NTRS2023

FUN3D Manual: 14.0.2

This manual describes the installation and execution of FUN3D version 14.0.2, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver may be used for formal design optimization, error estimation, and mesh adaptation. FUN3D also offers a reacting, real-gas capability and provides GPU acceleration of many common simulation options.

William K Anderson↗
NASA NTRS2023

High-Fidelity Analysis of Lift+Cruise VTOL Urban Air Mobility Concept Aircraft

This paper presents a high-fidelity multidisciplinary analysis for the NASA Lift+Cruise vertical takeoff and landing urban air mobility concept aircraft. The reported simulations couple comprehensive rotorcraft aeromechanics and high-fidelity computational fluid dynamics (CFD). Aerodynamic solutions are computed on dynamic, deforming, unstructured, overset grid systems by an unsteady CFD solver, FUN3D, developed at the NASA Langley Research Center. An integrated overset-grid assembler, Yoga, is used for communications between component grids. Two turbulence models are compared for loose-coupling simulations in hover and low-speed forward flight conditions. One model is the negative variant of the one-equation Spalart-Allmaras model (SA-neg), and the other model is the SA-neg-R model adding a simple rotation correction term to the SA-neg model. It demonstrated that the rotation correction in the SA-neg-R turbulence model significantly improves resolution of secondary vortices and wake interactions for rotorcraft simulations.

CFD↗
NASA NTRS2022

FUN3D Manual: 14.0

This manual describes the installation and execution of FUN3D version 14.0,including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver may be used for for-mal design optimization, error estimation, and mesh adaptation. FUN3D also offers a reacting, real-gas capability and provides GPU acceleration of many common simulation options.1

William K Anderson↗
NASA NTRS2022

An Analysis of Spatio-Temporal Relationship between Satellite-Based Land Surface Temperature and Station-Based Near-Surface Air Temperature over Brazil

A better understanding of the relationship between land surface temperature (Ts) and near-surface air temperature (Ta) is crucial for improving the simulation accuracy of climate models, developing retrieval schemes for soil and vegetation moisture, and estimating large-scale Ta from satellite-based Ts observations. In this study, we investigated the relationship between multiple satellite-based Ts products, derived from the Atmospheric Infrared Sounder (AIRS) and the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard Aqua satellite, and Ta from 204 meteorological stations over Brazil during 2003–2016. Monthly satellite-based Ts products used in this study include: (1) AIRS Version 6 with 1° spatial resolution, (2) AIRS Version 7 with 1° spatial resolution, (3) MODIS Collection 6 with 0.05° spatial resolution, and (4) MODIS Collection 6 with 1° spatial resolution re-sampled from (3) for a direct comparison with AIRS products. We found that satellite-based Ts is lower than Ta over the forest area, but higher than Ta over the non-forest area. Nevertheless, the correlation coefficients (R) between monthly Ta and four Ts products during 2003–2016 are greater than 0.8 over most stations. The long-term trend analysis shows a general warming trend in temperatures, particularly over the central and eastern parts of Brazil. The satellite products could also observe the increasing Ts over the deforestation region. Furthermore, we examined the temperature anomalies during three drought events in the dry season of 2005, 2010, and 2015. All products show similar spatio-temporal patterns, with positive temperature anomalies expanding in areal coverage and magnitude from the 2005 to 2015 event. The above results show that satellite-based Ts is sensitive in reflecting environmental changes such as deforestation and extreme climatic events, and can be used as an alternative to Ta for climatological studies. Moreover, the observed differences between Ts and Ta may inform how thermal assumptions can be improved in satellite-based retrievals of soil and vegetation moisture or evapotranspiration.

land surface temperature↗
NASA NTRS2020

Empirical estimates of regional carbon budgets imply reduced global soil heterotrophic respiration

Resolving regional carbon budgets is critical for informing land-based mitigation policy. For nine regions covering nearly the whole globe, we collected inventory estimates of carbon-stock changes complemented by satellite estimates of biomass changes where inventory data are missing. The net land–atmospheric carbon exchange (NEE) was calculated by taking the sum of the carbon-stock change and lateral carbon fluxes from crop and wood trade, and riverine-carbon export to the ocean. Summing up NEE from all regions, we obtained a global ‘bottom-up’ NEE for net land anthropogenic CO2 uptake of –2.2±0.6 PgC/yr consistent with the independent top-down NEE from the global atmospheric carbon budget during 2000–2009. This estimate is so far the most comprehensive global bottom-up carbon budget accounting, which set up an important milestone for global carbon-cycle studies. By decomposing NEE into component fluxes, we found that global soil heterotrophic respiration amounts to a source of CO2 of 39 PgC/yr with an interquartile of 33–46 PgC/yr —a much smaller portion of net primary productivity than previously reported.

carbon budget↗
NASA NTRSDate not supplied

Improvements in Iterative Convergence of FUN3D Solutions

This paper presents a hierarchical adaptive nonlinear iteration method (HANIM) implemented in NASA computational fluid dynamics code, FUN3D, to improve robustness and computational efficiency of FUN3Dsolutions. In contrast to the baseline iterative solver that relies on an approximate Jacobian, a simple multicolor Gauss-Seidel point-implicit iteration scheme, and linear CFL ramping, HANIM is based upon a hierarchy of modules including pre conditioner, generalized conjugate residual, realizability check, nonlinear control,and CFL adaption modules. HANIM performance is systematically compared with the performance of the baseline solver. The iterative solutions are compared for three aerodynamic benchmark cases: a subsonic separated flow around a hemisphere cylinder, a supersonic flow through a long duct, and a subsonic flow over the NASA wing-body juncture model. Two Reynolds-averaged Navier-Stokes turbulence models are used in these computations, namely, the negative variant of the linear one-equation Spalart-Allmar as model and its nonlinear extension based on quadratic constitutive relations.

Li Wang↗
NASA NTRSDate not supplied

Improvements in Iterative Convergence of FUN3D Solutions

This paper presents a hierarchical adaptive nonlinear iteration method (HANIM) implemented in the NASA computational fluid dynamics code, FUN3D, to improve robustness and computational efficiency. In contrast to the legacy FUN3D iterative solver that relies on an approximate Jacobian, a simple multicolor Gauss-Seidel point-implicit iteration scheme, and linear Courant-Friedrichs-Lewy number (CFL) ramping, HANIM is based upon a hierarchy of modules including preconditioner, generalized conjugate residual, realizability check, nonlinear control, and CFL adaption modules. HANIM performance is systematically compared with the performance of the legacy solver of FUN3D and a baseline solver based on a preconditioner alone. Iterative solutions are compared for three benchmark cases: a subsonic separated flow around a hemisphere cylinder, a supersonic flow through a long duct, and a subsonic flow over the NASA wing-fuselage juncture model. Two Reynolds-averaged Navier-Stokes turbulence models are used in these computations, namely, the negative variant of the linear one-equation Spalart-Allmaras model and its nonlinear extension based on quadratic constitutive relations.

CFD↗
NASA NTRSDate not supplied

Verification Test Suite for Spalart-Allmaras QCR2000 Turbulence Model

The paper presents three benchmark cases for verification of Reynolds-averaged Navier-Stokes solvers. The verification studies focus on a one-equation Spalart-Allmaras model, SA-[neg]-QCR2000, that uses a version of quadratic constitutive relations.The benchmark cases are a two-dimensional subsonic flow around a Joukowski airfoil, a three-dimensional supersonic flow through a square duct, and a three-dimensional flow over a wing-fuselage configuration. The turbulence-model formulation, geometry, flow conditions, grids, and the expected output are described in detail. Reference solutions computed by several established codes are shown

Computational Aerodynamics↗
NASA NTRSDate not supplied

Edge Based Viscous Method for Node-Centered Formulations

This paper presents a novel, efficient, conservative, edge-based method for evaluation of mean flow viscous fluxes and turbulence-model diffusion terms of the Reynolds-averaged Navier-Stokes equations on tetrahedral grids. The new method is implemented in a practical, node-centered, finite-volume computational fluid dynamics solver. The baseline finite-volume scheme that is equivalent to a second-order accurate finite-element Galerkin approximation of viscous stresses is reformulated. The order of operations to compute the cell-based Green-Gauss gradients is changed to combine the operations by edge, which leads to an equivalent formulation on tetrahedral grids, improves efficiency, and preserves the compact discretization stencil based on the nearest neighbors. The computational results presented in this paper verify the implementation of this edge-based method by comparing its accuracy and iterative convergence with those of the well verified and validated baseline formulation. Efficiency gains for residual and Jacobian evaluations result in significant reduction of time to solution. This novel edge-based formulation on tetrahedra can be seamlessly combined with the baseline formulation on cells of other types for computing solutions on mixed-element grids.

Edge Based↗
NASA NTRSDate not supplied

Edge-Based Viscous Method for Mixed-Element Node-Centered Finite-Volume Solvers

A novel, efficient, edge-based viscous (EBV) discretization method has been recently developed, implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver, and applied to viscous-kernel computations that include evaluations of meanflow viscous fluxes, turbulence-model and chemistry-model diffusion terms, and the corresponding Jacobian contributions. Initially, the EBV method had been implemented for tetrahedral grids and demonstrated multifold acceleration of all viscous-kernel computations. This paper presents an extension of the EBV method for mixed-element grids. In addition to the primal edges of a given mixed-element grid, virtual edges are introduced to connect cell nodes that are not connected by a primal edge. The EBV method uses an efficient loop over all (primal and virtual) edges and features a compact discretization stencil based on the nearest neighbors. This study verifies the EBV method and assesses its efficiency on mixed-element grids by comparing the EBV solution accuracy and iterative convergence with those of well-established solutions obtained using a cell-based viscous (CBV) discretization method. The EBV solver’s memory footprint is optimized and often smaller than the memory footprint of the CBV solver. A multifold speedup is demonstrated for all viscous-kernel computations resulting in significant reduction of the time to solutions for several benchmark mixed-element-grid computations, including simulations of a flow around NASA’s juncture-flow model and a hypersonic, chemically reacting flow around a blunt body.

CFD↗
NASA NTRSDate not supplied

Edge-Based Viscous Method for Mixed-Element Node-Centered Finite-Volume Solvers

A novel, efficient, edge-based viscous (EBV) discretization method has been recently developed, implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver, and applied to viscous-kernel computations that include evaluations of meanflow viscous fluxes, turbulence-model and chemistry-model diffusion terms, and the corresponding Jacobian contributions. Initially, the EBV method had been implemented for tetrahedral grids and demonstrated multifold acceleration of all viscous-kernel computations. This paper presents an extension of the EBV method for mixed-element grids. In addition to the primal edges of a given mixed-element grid, virtual edges are introduced to connect cell nodes that are not connected by a primal edge. The EBV method uses an efficient loop over all (primal and virtual) edges and features a compact discretization stencil based on the nearest neighbors. This study verifies the EBV method and assesses its efficiency on mixed-element grids by comparing the EBV solution accuracy and iterative convergence with those of well-established solutions obtained using a cell-based viscous (CBV) discretization method. The EBV solver’s memory footprint is optimized and often smaller than the memory footprint of the CBV solver. A multifold speedup is demonstrated for all viscous-kernel computations resulting in significant reduction of the time to solutions for several benchmark mixed-element-grid computations, including simulations of a flow around NASA’s juncture-flow model and a hypersonic, chemically reacting flow around a blunt body.

Edge-based viscous method↗
NASA NTRSDate not supplied

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗
NASA NTRSDate not supplied

A Multi-Architecture Approach for Implicit Computational Fluid Dynamics on Unstructured Grids

High-performance computing (HPC) architectures are trending toward manycore paradigms such as graphics processing units (GPUs). Approximately half of the top 100 publicly disclosed supercomputers in the world utilize GPU accelerators for performance. This is in contrast to a decade ago, where there were only a few such machines in the top 100. It is not currently possible to compile and run legacy central processing unit (CPU) software efficiently on GPUs without significant refactoring. Though a number of frameworks offering performance portability exist, none offer a standardized specification that is supported by all major hardware vendors. Additionally, experiences show that obtaining a high percentage of peak performance often requires architecture-specific code. This work details a pragmatic multi-architecture computational fluid dynamics library focused on aerospace problems across the speed range from low subsonic to hypersonic flows involving thermochemical nonequilibrium. A thin abstraction layer above NVIDIA CUDA C++ is utilized, which enables primarily single-source software currently capable of running efficiently on multicore CPUs, NVIDIA GPUs, AMD GPUs, and Intel GPUs. Results on various problems of interest across the speed range are presented and performance is compared between various architectures.

GPU↗