Multiple topological states in LaAgAs2, a failed square-net semimetal
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Engineering topics
Yilmaz, Turgut
Publications and source records attributed to Yilmaz, Turgut.
Surface Electronic Structure of Cr Doped Bi 2 Se 3 Single Crystals
Here, by using angle-resolved photoemission spectroscopy, we showed that Bi 2-x Cr x Se 3 single crystals have a distinctly well-defined band structure with a large bulk band gap and undistorted topological surface states. These spectral features are unlike their thin film forms in which a large nonmagnetic gap with a distorted band structure was reported. We further provide laser-based high resolution photoemission data which reveal a Dirac point gap even in the pristine sample. The gap becomes more pronounced with Cr doping into the bulk of Bi 2 Se 3 . These observations show that the Dirac point can be modified by the magnetic impurities as well as the light source.
36 MATERIALS SCIENCE↗
Evolution of the Fermi Surface of 1T-VSe 2 across a Structural Phase Transition
Periodic lattice distortion, known as the charge density wave, is generally attributed to electron–phonon coupling. This correlation is expected to induce a pseudogap at the Fermi level in order to gain the required energy for stable lattice distortion. The transition metal dichalcogenide 1T-VSe 2 also undergoes such a transition at 110 K. Here, we present detailed angle-resolved photoemission spectroscopy experiments to investigate the electronic structure in 1T-VSe 2 across the structural transition. Previously reported warping of the electronic structure and the energy shift of a secondary peak near the Fermi level as the origin of the charge density wave phase are shown to be temperature independent and hence cannot be attributed to the structural transition. Our work reveals new states that were not resolved in previous studies. Earlier results can be explained by the different dispersion natures of these states and temperature-induced broadening. Only the overall size of the Fermi surface is found to change across the structural transition. These observations, quite different from the charge density wave scenario commonly considered for 1T-VSe 2 and other transition metal dichalcogenides, bring fresh perspectives toward correctly describing structural transitions. Therefore, these new results can be applied to material families in which the origin of the structural transition has not been resolved.
36 MATERIALS SCIENCE↗
Observation of orbital selective charge transfer in a Fe/BaTiO 3 interfacial two-dimensional electron gas
Two-dimensional electron gas (2DEG) states at oxide interfaces between two ferroic materials have been fertile ground to realize controllable multiferroicity. Here, in this work, we investigate the 2DEG states at the interface of ferroelectric BaTiO 3 and a magnetic layer of iron using angle-resolved photoemission spectroscopy. Orbital-selective charge transfer occurs on the surprisingly robust 2DEG. Based on first-principles calculations, we show how the interfacial hybridization can give rise to the unexpected charge transfer in the magnetic 2DEG. Our study reveals a close interplay on a 2DEG between magnetic and ferroelectric interfaces, which sheds light on future design principles of multiferroic 2DEG states.
36 MATERIALS SCIENCE↗
Reversible non-volatile electronic switching in a near-room-temperature van der Waals ferromagnet
Abstract Non-volatile phase-change memory devices utilize local heating to toggle between crystalline and amorphous states with distinct electrical properties. Expanding on this kind of switching to two topologically distinct phases requires controlled non-volatile switching between two crystalline phases with distinct symmetries. Here, we report the observation of reversible and non-volatile switching between two stable and closely related crystal structures, with remarkably distinct electronic structures, in the near-room-temperature van der Waals ferromagnet Fe 5− δ GeTe 2 . We show that the switching is enabled by the ordering and disordering of Fe site vacancies that results in distinct crystalline symmetries of the two phases, which can be controlled by a thermal annealing and quenching method. The two phases are distinguished by the presence of topological nodal lines due to the preserved global inversion symmetry in the site-disordered phase, flat bands resulting from quantum destructive interference on a bipartite lattice, and broken inversion symmetry in the site-ordered phase.
36 MATERIALS SCIENCE↗
Manipulating topological properties in Bi 2 Se 3 / BiSe /transition metal dichalcogenide heterostructures with interface charge transfer
Heterostructures of topological insulator Bi 2 Se 3 on transition metal dichalcogenides (TMDCs) offer a new materials platform for studying novel quantum states by exploiting the interplay among topological orders, charge orders and magnetic orders. Here, the diverse interface attributes, such as material combination, charge re-arrangement, defect and strain, can be utilized to manipulate the quantum properties of this class of materials. Recent experiments of Bi 2 Se 3 /NbSe 2 heterostructures show signatures of strong Rashba band splitting due to the presence of a BiSe buffer layer, but the atomic level mechanism is not fully understood. We conduct first-principles studies of the Bi 2 Se3/BiSe/TMDC heterostructures with five different TMDC substrates (1T phase VSe 2 , MoSe 2 , TiSe 2 , and 2H phase NbSe 2 , MoSe 2 ). We find significant charge transfer at both BiSe/TMDC and Bi 2 Se 3 /BiSe interfaces driven by the work function difference, which stabilizes the BiSe layer as an electron donor and creates interface dipole. The electric field of the interface dipole breaks the inversion symmetry in the Bi 2 Se 3 layer, leading to the giant Rashba band splitting in two quintuple layers and the recovery of the Dirac point in three quintuple layers, with the latter otherwise only occurring in thicker samples with at least six Bi 2 Se 3 quintuple layers. Besides, we find that strain can significantly affect the charge transfer at the interfaces. Our study presents a promising avenue for tuning topological properties in heterostructures of two-dimensional materials, with potential applications in quantum devices.
36 MATERIALS SCIENCE↗
Untangling charge-order dependent bulk states from surface effects in a topological kagome metal ScV 6 Sn 6
Kagome metals with charge density wave (CDW) order exhibit a broad spectrum of intriguing quantum phenomena. The recent discovery of the novel kagome CDW compound ScV 6 Sn 6 has spurred significant interest. However, understanding the interplay between CDW and the bulk electronic structure has been obscured by a profusion of surface states and terminations in this quantum material. Here, in this study, we employ photoemission spectroscopy and potassium dosing to elucidate the complete bulk band structure of ScV 6 Sn 6 , revealing multiple van Hove singularities near the Fermi level. We surprisingly discover a robust spin-polarized topological Dirac surface resonance state at the M point within the twofold van Hove singularities. Assisted by first-principles calculations, the temperature dependence of the k z -resolved angle-resolved photoemission spectroscopy spectrum provides unequivocal evidence for the proposed $\sqrt{3}$×$\sqrt{3}$×3 charge order over other candidates. Our work not only enhances the understanding of the CDW-dependent bulk and surface states in ScV 6 Sn 6 , but also establishes an essential foundation for potential manipulation of the CDW order in kagome materials.
36 MATERIALS SCIENCE↗
Non-Fermi liquid behaviour in a correlated flat-band pyrochlore lattice
Electronic correlation effects are manifested in quantum materials when either the on-site Coulomb repulsion is large or the electron kinetic energy is small. The former is the dominant effect in cuprate superconductors and heavy-fermion systems whereas it is the latter in twisted bilayer graphene and geometrically frustrated metals. However, the simultaneous cooperation of both effects in the same quantum material remains rare. The design aim is to produce correlated topological flat bands pinned at the Fermi level. Here, we observe a flat band at the Fermi level in a 3d pyrochlore metal CuV 2 S 4 . Our angle-resolved photoemission spectroscopy data reveal that destructive quantum interference associated with the V pyrochlore sublattice and further renormalization to the Fermi level by electron interactions induce this flat band. Consequently, we discover transport signatures that evidence a deviation from Fermi liquid behaviour as well as an enhanced Sommerfeld coefficient. Our work illustrates the combined cooperation of local Coulomb interactions and geometric frustration in a pyrochlore lattice system to induce correlated topology by constructing and pinning correlated flat bands near the Fermi level.
36 MATERIALS SCIENCE↗
Two-dimensional heavy fermions in the van der Waals metal CeSiI
Heavy-fermion metals are prototype systems for observing emergent quantum phases driven by electronic interactions. A long-standing aspiration is the dimensional reduction of these materials to exert control over their quantum phases, which remains a significant challenge because traditional intermetallic heavy-fermion compounds have three-dimensional atomic and electronic structures. Here we report comprehensive thermodynamic and spectroscopic evidence of an antiferromagnetically ordered heavy-fermion ground state in CeSiI, an intermetallic comprising two-dimensional (2D) metallic sheets held together by weak interlayer van der Waals (vdW) interactions. Owing to its vdW nature, CeSiI has a quasi-2D electronic structure, and we can control its physical dimension through exfoliation. The emergence of coherent hybridization of f and conduction electrons at low temperature is supported by the temperature evolution of angle-resolved photoemission and scanning tunnelling spectra near the Fermi level and by heat capacity measurements. Electrical transport measurements on few-layer fakes reveal heavy-fermion behaviour and magnetic order down to the ultra-thin regime. Importantly, our work establishes CeSiI and related materials as a unique platform for studying dimensionally confined heavy fermions in bulk crystals and employing 2D device fabrication techniques and vdW heterostructures to manipulate the interplay between Kondo screening, magnetic order and proximity effects.
36 MATERIALS SCIENCE↗
Evolution of Highly Anisotropic Magnetism in the Titanium-Based Kagome Metals LnTi 3 Bi 4 (Ln: La···Gd 3+ , Eu 2+ , Yb 2+ )
Here, we present a family of titanium-based kagome metals of the form LnTi 3 Bi 4 (Ln: La···Gd 3+ , Eu 2+ , Yb 2+ ). Four previously unreported compounds are presented: YbTi 3 Bi 4 , GdTi 3 Bi 4 , NdTi 3 Bi 4 , and PrTi 3 Bi 4 . Single-crystal growth methods are provided alongside detailed magnetic and thermodynamic measurements across the entire series. The LnTi 3 Bi 4 family of compounds are orthorhombic (Fmmm), layered compounds that exhibit slightly distorted titanium-based kagome nets interwoven with zigzag lanthanide-based (Ln) chains. Crystals are easily exfoliated parallel to the kagome sheets, and angular resolved photoemission (ARPES) measurements highlight the intricacy of the electronic structure in these compounds. Density functional theory (DFT) and ARPES studies find Dirac points near the Fermi level, consistent with the kagome-derived band structure. The magnetic properties and the associated anisotropy emerge from the quasi-1D zigzag chains of Ln and impart a wide array of magnetic ground states ranging from anisotropic ferromagnetism to complex antiferromagnetism with a cascade of metamagnetic transitions. In conclusion, the combination of the kagome-based electronic structure and highly anisotropic Ln-based magnetism on an exfoliatable platform cements the LnTi 3 Bi 4 family as an interesting addition to the ever-expanding suite of kagome metals.
36 MATERIALS SCIENCE↗
Gapless surface electronic structure of $1T–$$\mathrm{TiSe_2}$ in the distorted phase
Here, low temperature, high resolution angle resolved photoemission experiments performed on bulk $1T–$$\mathrm{TiSe_2}$ samples display conspicuous band folding as the only prominent signature of the periodic lattice distortion. The presence of a bulk electronic gap supporting a charge density wave phase is not confirmed in light of the new data. These observations cast serious doubts on the common belief of an electronic instability as the likely origin for the observed structural transition in $\mathrm{TiSe_2}$.
36 MATERIALS SCIENCE↗
Dirac nodal arc in 1T-VSe 2
Transition metal dichalcogenides exhibit many fascinating properties including superconductivity, magnetic orders, and charge density wave. The combination of these features with a non-trivial band topology opens the possibility of additional exotic states such as Majorana fermions and quantum anomalous Hall effect. Here, we report on photon-energy and polarization dependent spin-resolved angle-resolved photoemission spectroscopy experiments on single crystal 1T-VSe 2 , revealing an unexpected band inversion and emergent Dirac nodal arc with spin-momentum locking. Density functional theory calculations suggest a surface lattice strain could be the driving mechanism for the topologically nontrivial electronic structure of 1T-VSe 2 .
36 MATERIALS SCIENCE↗
Multiband Fermi surface in $1T–$$\mathrm{VSe_2}$ and its implication for the charge density wave phase
Angle-resolved photoemission spectroscopy experiments reveal a surprisingly richer surface electronic structure in $1T–$$\mathrm{VSe_2}$ than previously predicted or probed. Earlier claims supporting a charge density wave phase in this material are reexamined in terms of these findings and are found to be untenable. Here, the Fermi surface is found to be gapless, while band warping effects, currently attributed to three-dimensional lattice distortion, result from the simultaneous dispersion of the closely lying multiple bands. Based on these findings, a charge density wave scenario in $1T–$$\mathrm{VSe_2}$ is unlikely. On the other side, the presence of multiple states crossing the Fermi level should constitute relevant constraints for any viable microscopic model of the structural phase transition of $\mathrm{VSe_2}$.
36 MATERIALS SCIENCE↗