Engineering topics

Yim, Solomon

Publications and source records attributed to Yim, Solomon.

3 records

DOE OSTI2023

Dynamic Mooring Field Experiment and Design of a Wave Energy Converter Platform Test System

Abstract This study evaluated a multi-catenary spread mooring system design of a mobile ocean test berth for wave energy converters (WECs), the Ocean Sentinel (OS) instrumentation buoy, through dynamic simulation, numerical analysis, and comparison with measured field motion data of the OS off the OR coast. First, the accuracy of the numerical employed model based on a fully-coupled method of the OS and its mooring lines was validated by comparing predicted mooring tensions to the field measurements. Then, the anchor movability, fatigue damage, and extreme mooring tension of the OS mooring system were analyzed to assess survivability. Field test results show that the numerical model provided accurate predictions of mooring tensions even under environmental conditions of strong wind, current, and waves. Factors affecting the accuracy are discussed. One mooring anchor was shown to have moved significantly during the ocean field test. Mooring fatigue damage was calculated for different levels of sea states. Design strengths of the mooring lines were calculated and analyzed.

Engineering↗

DOE OSTI2020

HYDRODYNAMIC ANALYSIS OF MACROALGAE LOCAL MODEL USING COMPUTATIONAL FLUID DYNAMICS

In this article, a local scale, fully nonlinear coupled fluid-structural interaction (FSI) sugar kelp model has been developed using a computational fluid dynamics (CFD) method. In this model, to be consistent with available experimental data, the sugar kelp is approximated as elongated rectangles with smoothed isosceles triangles at the ends and a single kelp model with one end fixed in a channel with constant current model is developed. Several different current speeds are simulated, and the resulting drag forces and calculated drag coefficients are validated by comparison with experimental data from the literature. In a previous study, a global scale model was developed using a computational structural dynamics (CSD) method to simulate macroalgae farming system and guide the system configuration design. In the global scale model, the hydrodynamic forces are calculated using Morison’s equation and the kinematics and dynamics of the sugar kelp are simplified and the group of kelps attached to the long line is modeled as a slender structure with the same length and an effective diameter such that the volumes are consistent with the real physical system. This simplified model matches the weight and buoyancy but adjusting the hydrodynamic properties when the general hydrodynamic coefficients are employed. Therefore, optimal hydrodynamic coefficients used in global scale model were determined to obtain the hydrodynamic force more accurately. The validated local scale model is then be applied to determine the hydrodynamic coefficients of the simplified sugar kelp model for global dynamic analysis.

hydrodynamic modeling, macroalgae, CFD model↗

DOE OSTI2020

Multi-resolution, Multi-scale Modeling for Scalable Macroalgae Production

Macroalgae harvested along coastlines and in the open ocean has traditionally been used as food for human consumption, animal feed, and fertilizer. The U.S. ARPA-E MARINER Program estimates that the nation has suitable conditions and geography to produce at least 500 million dry metric tons of macroalgae per year, yielding approximately 2.7 quadrillion BTUs of energy in the form of liquid fuel, which is roughly 10% of the nation’s annual transportation energy demand. Adverse environmental effects of nutrient overload and ocean acidification may also be reduced by large-scale macroalgae cultivation in many coastal ocean regions. However, the successful deployment of large-scale marine macroalgae farms for fuel production depends on ambient hydrodynamic conditions and nutrient availability, as well as their interactions with macroalgae farm structures. Pacific Northwest National Laboratory led an ARPA-E MARINER project to develop a set of numerical modeling tools capable of simulating ocean hydrodynamic and biogeochemical processes, macroalgae trajectories for free-floating systems, macroalgae growth and biomass yields, and hydrodynamic load on macroalgae canopies and farm structures using a multi-resolution and multi-scale approach. This set of modeling tools provides a suite of information essential for system design, optimal project siting, risk analysis, and management of macroalgae production systems in the ocean. Better clarity can also help macroalgae system developers reduce deployment costs, operational risk, and potential impacts on the local marine environment.

59 BASIC BIOLOGICAL SCIENCES↗