Search NASA⌕ Search

Engineering topics

Yoon, Tae-Jun

Publications and source records attributed to Yoon, Tae-Jun.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

PyOECP: A flexible open-source software library for estimating and modeling the complex permittivity based on the open-ended coaxial probe (OECP) technique

Here, we present PyOECP, a Python-based flexible open-source software for estimating and modeling the complex permittivity obtained from the open-ended coaxial probe (OECP) technique. The transformation of the measured reflection coefficient to complex permittivity is performed based on three different methods. The software library contains the dielectric spectra of common reference liquids, which can be used to transform the reflection coefficient into the dielectric spectra. Several Python routines that are commonly employed (e.g., SciPy and NumPy) in the field of science and engineering are required only so that the users can alter the software structure depending on their needs. The modeling algorithm exploits the Markov Chain Monte Carlo method for the data regression. The discrete relaxation models can be built by a proper combination of well-known relaxation models. In addition to these models, electrode polarization, a typical measurement artifact for interpreting dielectric spectra, can be incorporated into the modeling algorithm. A continuous relaxation model, which solves the Fredholm integral equation of the first kind (a mathematically ill-posed problem), is also included. This open-source software enables users to freely adjust the physical parameters to obtain physical insight into their materials under test and will be consistently updated for more accurate measurement and interpretation of dielectric spectra in an automated manner. This work describes the theoretical and mathematical background of the software, lays out the workflow, and validates the software functionality based on both synthetic and empirical data included in the software.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Selective recovery of critical materials in zero-liquid discharge supercritical water desalination

Zero-liquid discharge desalination techniques are being actively studied as alternative means to produce drinkable water and recover valuable resources without polluting the environment. Supercritical water desalination is one of such alternatives that can overcome the technical and environmental challenges in standard desalination techniques. In addition to these attractive features, this work explores the possibility of utilizing supercritical water desalination for the selective recovery of strategic (critical) materials as co-products. Here, to validate the technical and economic feasibility of the process, we prepared model brine solutions that consist of sodium, neodymium, and different anions and conducted a series of desalination experiments. The results were analyzed experimentally and theoretically and were utilized to evaluate the economic feasibility of the process. When a few tens or hundreds of parts-per-million critical materials are dissolved in the feed, the proposed method becomes more cost-effective in producing critical materials than existing technologies. In addition, it does not discharge any concentrated contaminants while producing drinkable water. These results suggest that supercritical water desalination can recover critical materials while producing freshwater in an economically feasible fashion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optimal design of multi-stage vacuum membrane distillation and integration with supercritical water desalination for improved zero liquid discharge desalination

Herein this paper proposes a novel concept for the optimal design of multi-stage vacuum membrane distillation (VMD). Generally, a multi-stage VMD is designed with an equal temperature difference between each stage. However, such a design is energy inefficient and increases VMD area. An analytical methodology for calculating the optimal stage temperature is proposed. By selecting the optimal stage temperature, the energy efficiency and required membrane area can be potentially improved by 16% and 30%, respectively. The proposed concept applies to all heat sources, including latent, sensible, and waste heat. To illustrate the method, multi-stage VMD is integrated with the waste heat from a supercritical water desalination (SCWD) system to achieve zero liquid discharge. SCWD is an energy-intensive process, requires high-quality thermal heat (>450 °C), and exhibits high waste heat rejection. The integrated VMD-SCWD approach is approximately 50% more energy-efficient and 35% more cost-efficient than the standalone SCWD system. Compared to the commercially used brine concentrator and crystallizer, the multi-stage VMD-SCWD system is more energy efficient for feed concentrations >5%. VMD-SCWD system is 30% cheaper, due to less expensive membrane distillation modules compared to a brine concentrator. The proposed design concept can replace the brine concentrator and crystallizer as an improved alternative for a zero-liquid discharge desalination system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidating the temperature and density dependence of silver chloride hydration numbers in high-temperature water vapor: A first-principles molecular simulation study

Hydration numbers of metal complexes in low-density aqueous solutions are required for developing geochemical models for ore-forming metals and for designing supercritical desalination processes. In this study, we investigate the temperature and density dependence of the hydration numbers of silver chloride at 623 K, 673 K, and 713 K and densities of 10–100 kg/m 3 . Experimental estimates of the hydration number in the literature for AgCl at these conditions are inconclusive and possibly contradictory as to the temperature and density dependence. First-principles molecular simulation presents an attractive alternative to experimental measurements. Specifically, recent work shows that machine-learning-accelerated nested Monte Carlo simulations provide reliable estimates for the hydration numbers of CuCl at 623 K from 10 to 100 kg/m 3 . Using the same technique, we find a monotonic temperature dependence, with the hydration number decreasing slightly with increasing temperature. In addition, the simulation-predicted hydration numbers steadily increase with increasing density. These temperature and density trends are in agreement with certain experimental data sets. Therefore, this work demonstrates how first-principles Monte Carlo simulations assist in resolving discrepancies between experimental data sets. Our simulation results also correctly predict that the hydration number, and thus also the solubility, of AgCl is lower than that of CuCl under the same conditions. Furthermore, the bond length and angle formed between the water complex and AgCl differ from those for CuCl, consistent with the lower solubility of AgCl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

PyOECP: A flexible open-source software for the measurement and modeling of the dielectric spectrum from the reflection coefficient

We present PyOECP, a Python-based flexible open-source software for estimating and modeling the complex permittivity obtained from the open-ended coaxial probe (OECP) technique. The transformation of the measured reflection coefficient to complex permittivity is performed based on two different models, including the capacitance model and the antenna model. The software library contains dielectric spectra of common reference liquids, which can be used to transform the reflection coefficient into the dielectric spectra. Several Python routines that are commonly employed (e.g., SciPy and NumPy) are only required so that the users can alter the software structure depending on their needs. The modeling algorithm exploits the Markov chain Monte Carlo method for the data regression. The discrete relaxation models can be built by a proper combination of well-known relaxation models. In addition to these models, the electrode polarization, which is a common measurement artifact for interpreting the dielectric spectra, can be incorporated in the modeling algorithm. A continuous relaxation model, which solves the Fredholm integral equation of the first kind (a mathematically ill-posed problem) is also included.

Yoon, Tae-Jun↗
DOE OSTI2021

First-Principles Simulations of CuCl in High-Temperature Water Vapor

Experimental data suggest that the solubility of copper in high-temperature water vapor is controlled by the formation of hydrated clusters of the form CuCl(H 2 O) n , where the average number of water molecules in the cluster generally increases with increasing density [Migdisov, A. A.; et al. Geochim. Cosmochim. Acta2014, 129, 33–53]. However, the precise nature of these clusters is difficult to probe experimentally. Moreover, there are some discrepancies between experimental estimates of average cluster size and prior simulation work [Mei, Y. Geofluids2018, 2018, 4279124]. Here, we have performed first-principles Monte Carlo (MC) and molecular dynamics (MD) simulations to explore these clusters in finer detail. We find that molecular dynamics is not the most appropriate technique for studying aggregation in vapor phases, even at relatively high temperatures. Specifically, our MD simulations exhibit substantial problems in adequately sampling the equilibrium cluster size distribution. In contrast, MC simulations with specialized cluster moves are able to accurately sample the phase space of hydrogen-bonding vapors. At all densities, we find a stable, slightly distorted linear H 2 O–Cu–Cl structure, which is in agreement with the earlier simulations, surrounded by a variable number of water molecules. The surrounding water molecules do not form a well-defined second solvation shell but rather a loose network of hydrogen-bonded water with molecular CuCl on the outside edge of the water cluster. We also find a broad distribution of hydration numbers, especially at higher densities. In contrast to previous simulation work but in agreement with experimental data, we find that the average hydration number substantially increases with increasing density. Moreover, the value of the hydration number depends on the choice of cluster definition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Calculation of self-diffusion coefficients in supercritical carbon dioxide using mean force kinetic theory

This paper presents an application of mean force kinetic theory (MFT) to the calculation of the self-diffusivity of CO 2 in the supercritical fluid regime. Two modifications to the typical application of MFT are employed to allow its application to a system of molecular species. Therefore, the first is the assumption that the inter-particle potential of mean force can be obtained from the molecule center-of-mass pair correlation function, which in the case of CO 2 is the C–C pair correlation function. The second is a new definition of the Enskog factor that describes the effect of correlations at the surface of the collision volume. The new definition retains the physical picture that this quantity represents a local density increase, resulting from particle correlations, relative to that in the zero density homogeneous fluid limit. These calculations are facilitated by the calculation of pair correlation functions from molecular dynamics (MD) simulations using the FEPM2 molecular CO2 model. The self-diffusivity calculated from theory is in good agreement with that from MD simulations up to and slightly beyond the density at the location of the Frenkel line. The calculation is compared with and is found to perform similarly well to other commonly used models but has a greater potential for application to systems of mixed species and to systems of particles with long range interatomic potentials due to electrostatic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗