Search NASA⌕ Search

Engineering topics

Yoshida, Ryuji

Publications and source records attributed to Yoshida, Ryuji.

DCMIP2016: the tropical cyclone test case

This paper describes and analyzes the Reed–Jablonowski (RJ) tropical cyclone (TC) test case used in the 2016 Dynamical Core Model Intercomparison Project (DCMIP2016). This intermediate-complexity test case analyzes the evolution of a weak vortex into a TC in an idealized tropical environment. Reference solutions from nine general circulation models (GCMs) with identical simplified physics parameterization packages that participated in DCMIP2016 are analyzed in this study at 50 km horizontal grid spacing, with five of these models also providing solutions at 25 km grid spacing. Evolution of minimum surface pressure (MSP) and maximum 1 km azimuthally averaged wind speed (MWS), the wind–pressure relationship, radial profiles of wind speed and surface pressure, and wind composites are presented for all participating GCMs at both horizontal grid spacings. While all TCs undergo a similar evolution process, some reach significantly higher intensities than others, ultimately impacting their horizontal and vertical structures. TCs simulated at 25 km grid spacings retain these differences but reach higher intensities and are more compact than their 50 km counterparts. These results indicate that dynamical core choice is an essential factor in GCM development, and future work should be conducted to explore how specific differences within the dynamical core affect TC behavior in GCMs.

Willson, Justin L.↗

Thermodynamic approach for enhancing superconducting critical current performance

Abstract The addition of artificial pinning centers has led to an impressive increase in the critical current density ( J c ) of superconductors, enabling record-breaking all-superconducting magnets and other applications. The J c of superconductors has reached ~0.2–0.3 J d , where J d is the depairing current density, and the numerical factor depends on the pinning optimization. By modifying λ and/or ξ, the penetration depth and coherence length, respectively, we can increase J d . For (Y 0.77 Gd 0.23 )Ba 2 Cu 3 O y ((Y,Gd)123), we can achieve this by controlling the carrier density, which is related to λ and ξ. We can also tune λ and ξ by controlling the chemical pressure in Fe-based superconductors, i.e., BaFe 2 (As 1− x P x ) 2 films. The variation in λ and ξ leads to an intrinsic improvement in J c via J d , allowing extremely high values of J c of 130 MA/cm 2 and 8.0 MA/cm 2 at 4.2 K, consistent with an enhancement in J d of a factor of 2 for both incoherent nanoparticle-doped (Y,Gd)123 coated conductors (CCs) and BaFe 2 (As 1− x P x ) 2 films, showing that this new material design is useful for achieving high critical current densities in a wide array of superconductors. The remarkably high vortex-pinning force in combination with this thermodynamic and pinning optimization route for the (Y,Gd)123 CCs reached ~3.17 TN/m 3 at 4.2 K and 18 T ( H || c ), the highest values ever reported for any superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two–Dimensional Idealized Hadley Circulation Simulation for Global High Resolution Model Development

A new framework for the development of global high resolution models using a vertical- meridional, two-dimensional pole-to-pole domain is proposed. Compared with the three-dimensional global model, the two-dimensional framework can simulate cloud-scale convection at significantly reduced computational cost, data volume, and turn-around time, and accelerate the development phase. Although idealized, it allows for simulation of various clouds and scale interactions under a wide range of environmental conditions, even though zonal waves such as mid latitude storms cannot be simulated. Physics schemes can be tested and assessed over a full array of simultaneously occurring cloud regimes. The framework can serve as an intermediate step between a one-dimensional simulation and a full three-dimensional global model. Using this framework, we analyze the resolution dependencies of simulated clouds and the Hadley circulation in a range of global high resolution models by performing multiple 1000-day simulations; for some resolutions tested, for example, 2 km horizontal resolution, three-dimensional simulation is not feasible at the present time. Analysis shows that both horizontal and vertical resolution determine the properties of the Hadley circulation and clouds, and that the differences among the simulated Hadley circulations are understood as differences in scale interactions influenced by resolution.

54 ENVIRONMENTAL SCIENCES↗

Designing high-performance superconductors with nanoparticle inclusions: Comparisons to strong pinning theory

One of the most promising routes for achieving high critical currents in superconductors is to incorporate dispersed, non-superconducting nanoparticles to control the dissipative motion of vortices. However, these inclusions reduce the overall superconducting volume and can strain the interlaying superconducting matrix, which can detrimentally reduce T c . Consequently, an optimal balance must be achieved between the nanoparticle density n p and size d. Determining this balance requires garnering a better understanding of vortex–nanoparticle interactions, described by strong pinning theory. Here, we map the dependence of the critical current on nanoparticle size and density in (Y 0.77 , Gd 0.23 )Ba 2 Cu 3 O 7-δ films in magnetic fields of up to 35 T and compare the trends to recent results from time-dependent Ginzburg–Landau simulations. We identify consistency between the field-dependent critical current J c (B) and expectations from strong pinning theory. Specifically, we find that J c ∝ B -α , where α decreases from 0.66 to 0.2 with increasing density of nanoparticles and increases roughly linearly with nanoparticle size d/ξ (normalized to the coherence length). At high fields, the critical current decays faster (~B -1 ), suggesting that each nanoparticle has captured a vortex. When nanoparticles capture more than one vortex, a small, high-field peak is expected in J c (B). Due to a spread in defect sizes, this novel peak effect remains unresolved here. Finally, we reveal that the dependence of the vortex creep rate S on nanoparticle size and density roughly mirrors that of α, and we compare our results to low-T nonlinearities in S(T) that are predicted by strong pinning theory.

36 MATERIALS SCIENCE↗

DCMIP2016: the splitting supercell test case

Abstract. This paper describes the splitting supercell idealized test case used in the 2016 Dynamical Core Model Intercomparison Project (DCMIP2016). These storms are useful test beds for global atmospheric models because the horizontal scale of convective plumes is O(1 km), emphasizing non-hydrostatic dynamics. The test case simulates a supercell on a reduced-radius sphere with nominal resolutions ranging from 4 to 0.5 km and is based on the work of Klemp et al. (2015). Models are initialized with an atmospheric environment conducive to supercell formation and forced with a small thermal perturbation. A simplified Kessler microphysics scheme is coupled to the dynamical core to represent moist processes. Reference solutions for DCMIP2016 models are presented. Storm evolution is broadly similar between models, although differences in the final solution exist. These differences are hypothesized to result from different numerical discretizations, physics–dynamics coupling, and numerical diffusion. Intramodel solutions generally converge as models approach 0.5 km resolution, although exploratory simulations at 0.25 km imply some dynamical cores require more refinement to fully converge. These results can be used as a reference for future dynamical core evaluation, particularly with the development of non-hydrostatic global models intended to be used in convective-permitting regimes.

Zarzycki, Colin M.↗

DCMIP2016: a review of non-hydrostatic dynamical core design and intercomparison of participating models

Abstract. Atmospheric dynamical cores are a fundamental component of global atmospheric modeling systems and are responsible for capturing the dynamical behavior of the Earth's atmosphere via numerical integration of the Navier–Stokes equations. These systems have existed in one form or another for over half of a century, with the earliest discretizations having now evolved into a complex ecosystem of algorithms and computational strategies. In essence, no two dynamical cores are alike, and their individual successes suggest that no perfect model exists. To better understand modern dynamical cores, this paper aims to provide a comprehensive review of 11 non-hydrostatic dynamical cores, drawn from modeling centers and groups that participated in the 2016 Dynamical Core Model Intercomparison Project (DCMIP) workshop and summer school. This review includes a choice of model grid, variable placement, vertical coordinate, prognostic equations, temporal discretization, and the diffusion, stabilization, filters, and fixers employed by each system.

54 ENVIRONMENTAL SCIENCES↗