Engineering topics
You, H
Publications and source records attributed to You, H.
In-situ X-ray studies of oxygen surface exchange behavior in thin film La{sub 0.6}Sr{sub 0.4}Co{sub 0.2}Fe{sub 0.8}O{sub 3-8}
Abstract not provided
Effects of Li[sup +}, K{sup +} and Ba{sup 2 sup +} cations on the ORR at model and high surface area Pt and Au surfaces in alkaline solutions.
This Letter reveals new findings on the influence of noncovalent interactions on the electrochemical interface. Using surface X-ray scattering, we demonstrate that the barium cations are located at 3.4 {angstrom} away from the surface, suggesting that they are partially hydrated, though not adsorbed at the surface. The effect of the cation on the oxygen reduction reaction (ORR) ranges from significant (Pt) to little (Au), depending on the nature of the metal and cation. Finally, we show that these results, as obtained on well-defined single-crystal surfaces, correlate well with observations on high surface area nanoparticle catalysts.
Persistent oscillations of x-ray speckles: Pt(001) step flow.
We observed well-defined oscillations of speckle intensities from Pt (001) surfaces at high temperatures, persisting for tens of minutes. We used a model of hex-reconstructed terraces to show that the coherent x-rays reflected from the terraces retain their phases relative to the illumination boundary and the observed oscillations come from surface dynamics due to 'step-flow' motion. Our results demonstrate a possibility that x-ray speckles can be applied to monitor the real-time evolution of surfaces.
Microstructural effects on the oxygen exchange kinetics of La{<_0.7}Sr{<_0.3}MnO{<_3} thin films.
We investigated the relative contribution of the native surface and of the grain boundaries intersecting the surface to the chemical surface exchange of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSM) thin films. The chemical surface exchange coefficients, k{sub chem}, were determined using electrical conductivity relaxation (ECR). Two k{sub chem} values were obtained, indicating two surface exchange processes occurred in parallel. These two k{sub chem} values had different activation energies (Ea), which were interpreted as belonging to (1) the native surface response of individual grains/variants and (2) the variant/grain boundaries of the textured films. The first process has an activation energy of E{sub a,1} {approx} 1.57 eV, while E{sub a,2} {approx} 0.87 eV. The k{sub chem,2} values are almost 3 orders of magnitude higher than the k{sub chem,1} values at low temperatures. At higher temperatures, the data can be fit with one k{sub chem} that has an intermediate value of Ea, indicative of a transition region.
Recoiled Proton Tagged Knockout Reaction for {sup 8}He
Recently recoiled proton tagged knockout reaction experiments were carried-out for {sup 8}He at 82 MeV/nucleon. The purpose of the experiment are: (1) Through the core knocked out technique, to study the correlation of the valence neutrons in the ground state of {sup 8}He. This should provide new experimental information to the neutron coupling and neutron matter, including the BCS pairing and BEC pairing. (2) Through the valence neutron knocked out technique, to study the resonant states {sup 7}He and the related single particle states. This will be complementary to the previous similar measurement but with better selection of the reaction mechanism.Some new recoiled proton telescopes and the forward neutron spectrometer was applied in the experiment. Performance of the detection system and very preliminary experimental results are shown here.
Fabrication and characterization of platinum nanoparticle arrays of controlled size, shape and orientation.
We present a rigorous approach for the shape design of supported metal nanoparticle catalysts, morphologically identical to each other and epitaxially grown on strontium titanate substrates using electron beam lithography. We predict the particle shapes using Wulff construction based on density functional theory calculations of surface energies. Then, according to the theoretical predictions, we are able to tweak morphologies of the already produced nanocrystals by changing annealing conditions. The ability to design, produce and characterize the catalyst nanoparticles allows us to relate microscopic morphologies with macroscopic oxygen-reduction activities in perchloric acid [Komanicky et al., J. Am. Chem. Soc. 131 (2009) 5732]. The unexpectedly high oxygen-reduction activities proportional to inactive (1 0 0) facets led us to suggest a model where the reaction intermediates can cross over to neighboring facets in nanoscale proximity.
Monodisperse Pt{sub 3}Co nanoparticles as a catalyst for the oxygen reduction reaction : size-dependent activity.
Monodisperse Pt{sub 3}Co nanoparticles with size controlled from 3 to 9 nm have been synthesized through an organic solvothermal approach and applied as electrocatalysts for the oxygen reduction reaction. Electrochemical study shows that the Pt{sub 3}Co nanoparticles are highly active for the oxygen reduction reaction and the activity is size-dependent. The optimal size for maximal mass activity was established to be around 4.5 nm by balancing the electrochemically active surface area and specific activity.
Surface x-ray speckles : coherent surface diffraction from Au(0 01).
We present coherent speckled x-ray diffraction patterns obtained from a monolayer of surface atoms. We measured both the specular anti-Bragg reflection and the off-specular hexagonal reconstruction peak for the Au(001) surface reconstruction. We observed fluctuations of the speckle patterns even when the integrated intensity appears static. By autocorrelating the speckle patterns, we were able to identify two qualitatively different surface dynamic behaviors of the hex reconstruction depending on the sample temperature.
Shape-dependent activity of platinum array catalyst.
We produced millions of morphologically identical platinum catalyst nanoparticles in the form of ordered arrays epitaxially grown on (111), (100), and (110) strontium titanate substrates using electron beam lithography. The ability to design, produce, and characterize the catalyst nanoparticles allowed us to relate microscopic morphologies with macroscopic catalytic reactivities. We evaluated the activity of three different arrays containing different ratios of (111) and (100) facets for an oxygen-reduction reaction, the most important reaction for fuel cells. Increased catalytic activity of the arrays points to a possible cooperative interplay between facets with different affinities to oxygen. We suggest that the surface area of (100) facets is one of the key factors governing catalyst performance in the electrochemical reduction of oxygen molecules.
Temperature-induced ordering of metal/adsorbate structures at electrochemical interfaces.
The influence of temperature changes in water-based electrolytes on the atomic structure at the electrochemical interface has been studied using in situ surface X-ray scattering (SXS) in combination with cyclic voltammetry. Results are presented for the potential-dependent surface reconstruction of Au(100), the adsorption and ordering of bromide anions on the Au(100) surface, and the adsorption and oxidation of CO on Pt(111) in pure HClO{sub 4} and in the presence of anions. These systems represent a range of structural phenomena, namely metal surface restructuring and ordering transitions in both nonreactive spectator species and reactive adsorbate layers. The key effect of temperature appears to be in controlling the kinetics of the surface reactions that involve oxygenated species, such as hydroxyl adsorption and oxide formation. The results indicate that temperature effects should be considered in the determination of structure-function relationships in many important electrochemical systems.
In situ synchrotron x-ray spectroscopy of lanthanum manganite solid oxide fuel cell electrodes
Abstract not provided
In situ synchrotron x-ray studies of dense thin-film strontium-doped lanthanum manganite solid oxide fuel cell cathodes.
Using a model cathode-electrolyte system composed of epitaxial thin-films of La{sub 1-x}Sr{sub x}MnO{sub 3-{delta}} (LSM) on single crystal yttria-stabilized zirconia (YSZ), we investigated changes in the cation concentration profile in the LSM during heating and under applied potential using grazing incidence x-rays. Pulsed laser deposition (PLD) was used to grow epitaxial LSM(011) on YSZ(111). At room temperature, we find that Sr segregates to form Sr enriched nanoparticles and upon heating the sample to 700 C, Sr is slowly reincorporated into the film. We also find different amounts of Sr segregation as the X-ray beam is moved across the sample. The variation in the amount of Sr segregation is greater on the sample that has been subject to 72 hours of applied potential, suggesting that the electrochemistry plays a role in the Sr segregation.
Unique Activity of Platinum Adislands in the CO Electrooxidation Reaction
The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The development of electrocatalytic materials of enhanced activity and efficiency through careful manipulation, at the atomic scale, of the catalyst surface structure has long been a goal of electrochemists. To accomplish this ambitious objective, it would be necessary both to obtain a thorough understanding of the relationship between the atomic-level surface structure and the catalytic properties and to develop techniques to synthesize and stabilize desired active sites. In this contribution, we present a combined experimental and theoretical study in which we demonstrate how this approach can be used to develop novel, platinum-based electrocatalysts for the CO electrooxidation reaction in CO(g)-saturated solution; the catalysts show activities superior to any pure-metal catalysts previously known. We use a broad spectrum of electrochemical surface science techniques to synthesize and rigorously characterize the catalysts, which are composed of adisland-covered platinum surfaces, and we show that highly undercoordinated atoms on the adislands themselves are responsible for the remarkable activity of these materials.