Engineering topics
Young, C.
Publications and source records attributed to Young, C..
Monte Carlo validation experiments for the gas Cherenkov detectors at the National Ignition Facility and Omega
The gas Cherenkov detectors at NIF and Omega measure several ICF burn characteristics by detecting multi-MeV nuclear γ emissions from the implosion. Of primary interest are γ bang-time (GBT) and burn width defined as the time between initial laser-plasma interaction and peak in the fusion reaction history and the FWHM of the reaction history respectively. To accurately calculate such parameters the collaboration relies on Monte Carlo codes, such as GEANT4 and ACCEPT, for diagnostic properties that cannot be measured directly. This paper describes a series of experiments performed at the High Intensity γ Source (HIγS) facility at Duke University to validate the geometries and material data used in the Monte Carlo simulations. Results published here show that model-driven parameters such as intensity and temporal response can be used with less than 50% uncertainty for all diagnostics and facilities.
Spacecraft Conceptual Design Compared to the Apollo Lunar Lander
Future human exploration of the Moon will require an optimized spacecraft design with each sub-system achieving the required minimum capability and maintaining high reliability. The objective of this study was to trade capability with reliability and minimize mass for the lunar lander spacecraft. The NASA parametric concept for a 3-person vehicle to the lunar surface with a 30% mass margin totaled was considerably heavier than the Apollo 15 Lunar Module "as flown" mass of 16.4 metric tons. The additional mass was attributed to mission requirements and system design choices that were made to meet the realities of modern spaceflight. The parametric tool used to size the current concept, Envision, accounts for primary and secondary mass requirements. For example, adding an astronaut increases the mass requirements for suits, water, food, oxygen, as well as, the increase in volume. The environmental control sub-systems becomes heavier with the increased requirements and more structure was needed to support the additional mass. There was also an increase in propellant usage. For comparison, an "Apollo-like" vehicle was created by removing these additional requirements. Utilizing the Envision parametric mass calculation tool and a quantitative reliability estimation tool designed by Valador Inc., it was determined that with today?s current technology a Lunar Module (LM) with Apollo capability could be built with less mass and similar reliability. The reliability of this new lander was compared to Apollo Lunar Module utilizing the same methodology, adjusting for mission timeline changes as well as component differences. Interestingly, the parametric concept's overall estimated risk for loss of mission (LOM) and loss of crew (LOC) did not significantly improve when compared to Apollo.
Absolute integrated intensity for the nu-1 sulfur dioxide band
The absolute integrated intensity of the IR vibration-rotation nu-1 SO2 band was measured using the linear portion of the curve of growth. Infrared spectroscopic-absorption cell measurements were performed on sulfur dioxide at partial pressures less than 0.15 torr with nitrogen added to give a total pressure of 705 torr, the path length being 4 mm. The absolute integrated intensity was determined to be 112.0 plus or minus 2.6/cm/sq (atm cm) at 296 K at the 95% confidence level.
Absolute integrated intensity for the 3.44-microns NO2 band
A grating monochromator infrared spectrometer and a curve of growth technique were used to obtain the absolute integrated intensity for the 3.44 micron NO2 vibration-rotation band at very small NO2 partial pressures. The intensity was found to be 78.9 plus or minus 1.6/cm/(atm cm) at 296 K at the 95% confidence level. The study has relevance to the infrared spectral measurement of atmospheric NO2.
Foreign-gas-broadening effects in the 15-micron CO2 bands.
The effects of N2, O2, Ar, and He on the absorption of radiation by the 15-micron perpendicular CO2 bands are reported. The investigation was carried out at medium resolution and at gas pressures less than 1 atm. The results of the study are presented in the form of a band-averaged broadening coefficient for N2, band-averaged broadening factors for O2, Ar, and He, and wavelength dependent broadening coefficients for N2, O2, Ar, and He. Comparisons are made with other experimental and theoretical results. In addition transmittances were calculated for homogeneous paths using some of the molecular parameters determined in the study and compared with measured transmittances.
Shock interference heating on the space shuttle booster during ascent
Aerothermodynamic shock heating of space shuttle booster surface during atmospheric ascent
Tables for calculating the Voigt profile
Tables for meteorological radiative transfer calculations - Voight profile
Calculation of the absorption coefficient for lines with combined Doppler and Lorentz broadening.
Absorption coefficient for lines with combined Doppler and Lorentz broadening calculated, using Runge-Kutta method, continued fraction expansion and Hermite-Gauss quadrature
A Study of the Influence of Carbon Dioxide on Infrared Radiative Transfer in the Stratosphere and Mesosphere
No abstract available