Search NASASearch

Engineering topics

Young, G. R.

Publications and source records attributed to Young, G. R..

Earth radiation budget experiment and smart sensors

This paper presents the data analysis requirements for the Earth Radiation Budget Experiment and potential needs for a follow-on radiation budget system. The present requirements for determining the earth's radiation budget on scales from 250 by 250-km regions to global require two broadband measurements on each of three satellites. The instrument system is composed of wide- and medium-field-of-view radiometers and a narrow-field-of-view scanning radiometer. Modeled directional functions are required to interpret the data in terms of earth radiation fluxes. Meeting more stringent science requirements for a follow-on mission will require nine broadband channels with increased spatial and temporal sampling, resulting in six satellites and a fourfold increase in data transmission rates and ground-based data storage. Smart sensors can reduce the data and ground storage requirements by orders of magnitude with onboard processing, calibration, and attitude and ephemeris determination.

Young, G. R.

The Earth Radiation Budget Satellite System

The scientific objectives of an Earth Radiation Budget Satellite System (ERBSS) are discussed along with the associated data analysis methods, mission analysis, and the instrument systems. High resolution data on the scale of about 250 km over the entire globe are essential to gain insight into such features as the development of sea-surface temperature anomalies, radiation effects of ice and snow cover on the atmospheric circulation, albedo variation in the desert-vegetation boundaries, and major long-period circulation phenomena. The ERBSS experiment is also viewed as a precursor of an operational satellite system for monitoring the earth's radiation budget. Various numbers of satellites and orbit inclinations have been analyzed to define the satellite combination which provides sufficient coverage of the earth for spatial and temporal radiation sampling.

Woerner, C. V.

A simulation study of earth radiation budget data interpretation

The paper describes a simulation of a filtering analysis which yields radiation distributions, measured by a wide-field-of-view radiometer on board an earth satellite, on a scale smaller than the field of view of the instrument. Mathematical models are developed to represent an orbiting wide-field-of-view radiometer to provide simulated measurement data. The simulated measurements are analyzed by a data inversion technique to obtain estimates of the radiation heat fluxes at the top of the atmosphere. By comparing the estimated field to a real radiation field, the effects of directional model errors and sampling strategies are revealed.

Smith, G. L.

Statistical interpretation of pollution data from satellites

The NIMBUS-G environmental monitoring satellite has an instrument (a gas correlation spectrometer) onboard for measuring the mass of a given pollutant within a gas volume. The present paper treats the problem: How can this type measurement be used to estimate the distribution of pollutant levels in a metropolitan area. Estimation methods are used to develop this distribution. The pollution concentration caused by a point source is modeled as a Gaussian plume. The uncertainty in the measurements is used to determine the accuracy of estimating the source strength, the wind velocity, diffusion coefficients and source location.

Smith, G. L.

Time-fixed rendezvous by impulse factoring with an intermediate timing constraint

A method is presented for factoring a two-impulse orbital transfer into a three- or four-impulse transfer which solves the rendezvous problem and satisfies an intermediate timing constraint. Both the time of rendezvous and the intermediate time of a alinement are formulated as any element of a finite sequence of times. These times are integer multiples of a constant plus an additive constant. The rendezvous condition is an equality constraint, whereas the intermediate alinement is an inequality constraint. The two timing constraints are satisfied by factoring the impulses into collinear parts that vectorially sum to the original impulse and by varying the resultant period differences and the number of revolutions in each orbit. Five different types of solutions arise by considering factoring either or both of the two impulses into two or three parts with a limit for four total impulses. The impulse-factoring technique may be applied to any two-impulse transfer which has distinct orbital periods.

Green, R. N.

An algorithm for a general class of routing problems derived from Huygens' principle

If a set of N points or nodes with a nonnegative cost associated with each ordered pair is known, it is desired to find a path from one given node to another given node which minimizes the cost sum. An algorithm is presented which yields a global minimum solution after at most N - 1 iterations or on a typical large third-generation computer, after 1 hour of computation time for a 10,000-node problem. The rapid-access data storage capacity demanded by the algorithm is approximately 3N words for costs read in from slow-access storage or 2N words for calculable costs. The time-storage requirements of the algorithm known to the authors. When the problem is viewed as a discretized optimal control problem, after N-1 iterations, an optimal control or node transition is established for each of the N nodes or states; thus, the algorithm can be applied to situations were there may be errors in the control that necessitate a closed loop control that necessitate a closed loop control philosophy.

Avis, L. M.

Modification of an impulse-factoring orbital transfer technique to account for orbit determination and maneuver execution errors

A method has previously been developed to satisfy terminal rendezvous and intermediate timing constraints for planetary missions involving orbital operations. The method uses impulse factoring in which a two-impulse transfer is divided into three or four impulses which add one or two intermediate orbits. The periods of the intermediate orbits and the number of revolutions in each orbit are varied to satisfy timing constraints. Techniques are developed to retarget the orbital transfer in the presence of orbit-determination and maneuver-execution errors. Sample results indicate that the nominal transfer can be retargeted with little change in either the magnitude (Delta V) or location of the individual impulses. Additonally, the total Delta V required for the retargeted transfer is little different from that required for the nominal transfer. A digital computer program developed to implement the techniques is described.

Kibler, J. F.

Interpretation of air pollution data as measured by an airborne remote sensor

The investigation described is a continuation of the work reported by Smith et al. (1974) in which a single source was studied. In the current study, multiple sources of known location are considered. The study is concerned with the strength of each source and the resulting pollution concentration field. The characteristics of the remotely sensed data are discussed along with the parameter estimation procedure, the estimation of pollution parameters, and a numerical example.

Smith, G. L.

An approximation to midcourse correction direction errors.

A new approximation to the components of midcourse correction direction errors is described that is more accurate than a previously used approximation. The calculation effort involved is much less than that for numerical integration. A comparison of numerical integration results with those of the new approximation is presented in a diagram.

Kibler, J. F.

A Monte Carlo error analysis program for near-Mars, finite-burn, orbital transfer maneuvers

A computer program was developed which performs an error analysis of a minimum-fuel, finite-thrust, transfer maneuver between two Keplerian orbits in the vicinity of Mars. The method of analysis is the Monte Carlo approach where each off-nominal initial orbit is targeted to the desired final orbit. The errors in the initial orbit are described by two covariance matrices of state deviations and tracking errors. The function of the program is to relate these errors to the resulting errors in the final orbit. The equations of motion for the transfer trajectory are those of a spacecraft maneuvering with constant thrust and mass-flow rate in the neighborhood of a single body. The thrust vector is allowed to rotate in a plane with a constant pitch rate. The transfer trajectory is characterized by six control parameters and the final orbit is defined, or partially defined, by the desired target parameters. The program is applicable to the deboost maneuver (hyperbola to ellipse), orbital trim maneuver (ellipse to ellipse), fly-by maneuver (hyperbola to hyperbola), escape maneuvers (ellipse to hyperbola), and deorbit maneuver.

Green, R. N.

Orbital trim by velocity factoring with applications to the Viking mission.

An orbital trim technique has been developed to satisfy terminal rendezvous and intermediate timing constraints for planetary missions involving orbital operations. The technique utilizes a time-open two-impulse transfer from a specified initial orbit to a final orbit which satisfies all geometrical constraints. Each of the two impulses may then be factored, or split, into two or more vectorially equivalent impulses. The periods of the resulting intermediate orbits may be varied along with the number of revolutions in each orbit to satisfy the intermediate and final timing constraints. Factors in the range 0 to 1 result in rendezvous at the same cost as that of the two-impulse transfer. The technique is applied to the Viking mission to Mars although a similar procedure could be utilized for rendezvous operations about any planet.

Kibler, J. F.

A new guidance system figure-of-merit

Guidance system figure of merit determining relative effectiveness of launch vehicle in delivering spacecraft onto interplanetary trajectory

Young, G. R.