Search NASA⌕ Search

Engineering topics

Youngs, Wiley J.

Publications and source records attributed to Youngs, Wiley J..

Effects on Human Non-Small Lung Cancer Cell growth of Cu(II), Au(III) and Re(I) Complexes Containing N-donor Pyridyl Ligands: A Senior Undergraduate Research Project

Hands-on synthetic laboratory experiences are critically important for undergraduate chemistry majors. A senior undergraduate research experience at the College of Wooster is presented in the current work. The inorganic complexes [Cu(phenan) 2 (NO 3 ) 2 ] (1; phenan = phenanthridine) and [Au(phenan)Cl 3 ](2) were prepared by metallation of the phenan ligand in a 1:1 CH 3 OH/CH 2 Cl 2 mixture at room temperature. Complex 1 is a new inorganic coordination compound. The structures were confirmed by X-ray crystallography. Complex 1 reveals a distorted octahedral geometry around the central Cu (II) metal ion. In complex 2, the Au(III) atom exhibits a square planar geometry. In addition, we investigated [Cu(dmeobpy)(H 2 O) 2 ][NO 3 ] 2 (3; dmeobpy = 4,4’-dimethoxy-2,2’-bipyridine), [Cu(bap)(NO 3 ) 2 ](4; bap = 2,6-bis(azaindole)pyridine) and [Re(CO) 3 (dmeobpy)Cl] (5). The cytoxocities of 1-5, phenan, dmeobpy, bap and cisplatin were evaluated against several human non-small cell lung cancer cell lines (NCI-H1975, HCC827, NCI-H460, and NCI-A549). Compound 1 exhibited modest antitumor activity against the HCC827 cell line, with an IC 50 value of 19 µM. Compound 3 exhibits lower cytotoxic activity than 1. Finally, the cytotoxic activity of complex 5 (IC 50 < 11 µM) is significantly greater than 1 and 3 against the H1975 cancer cell line.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organometallic Polymeric Conductors

For aerospace applications, the use of polymers can result in tremendous weight savings over metals. Suitable polymeric materials for some applications like EMI shielding, spacecraft grounding, and charge dissipation must combine high electrical conductivity with long-term environmental stability, good processability, and good mechanical properties. Recently, other investigators have reported hybrid films made from an electrically conductive polymer combined with insulating polymers. In all of these instances, the films were prepared by infiltrating an insulating polymer with a precursor for a conductive polymer (either polypyrrole or polythiophene), and oxidatively polymerizing the precursor in situ. The resulting composite films have good electrical conductivity, while overcoming the brittleness inherent in most conductive polymers. Many aerospace applications require a combination of properties. Thus, hybrid films made from polyimides or other engineering resins are of primary interest, but only if conductivities on the same order as those obtained with a polystyrene base could be obtained. Hence, a series of experiments was performed to optimize the conductivity of polyimide-based composite films. The polyimide base chosen for this study was Kapton. 3-MethylThiophene (3MT) was used for the conductive phase. Three processing variables were identified for producing these composite films, namely time, temperature, and oxidant concentration for the in situ oxidation. Statistically designed experiments were used to examine the effects of these variables and synergistic/interactive effects among variables on the electrical conductivity and mechanical strength of the films. Multiple linear regression analysis of the tensile data revealed that temperature and time have the greatest effect on maximum stress. The response surface of maximum stress vs. temperature and time (for oxidant concentration at 1.2 M) is shown. Conductivity of the composite films was measured for over 150 days in air at ambient temperature. The conductivity of the films dropped only half an order of magnitude in that time. Films aged under vacuum at ambient temperature diminished slightly in conductivity in the first day, but did not change thereafter. An experimental design approach will be applied to maximize the efficiency of the laboratory effort. The material properties (initial and long term) will also be monitored and assessed. The experimental results will add to the existing database for electrically conductive polymer materials. Attachments: 1) Synthesis Crystal Structure, and Polymerization of 1,2:5,6:9,10-Tribenzo-3,7,11,13-tetradehydro(14) annulene. 2) Reinvestigation of the Photocyclization of 1,4-Phenylene Bis(phenylmaleic anhydride): Preparation and Structure of (5)Helicene 5,6:9,10-Dianhydride. 3) Preparation and Structure Charecterization of a Platinum Catecholate Complex Containing Two 3-Ethynyltheophone Groups. and 4) Rigid-Rod Polymers Based on Noncoplanar 4,4'-Biphenyldiamines: A Review of Polymer Properties vs Configuration of Diamines.

Youngs, Wiley J.↗

Rigid-Rod Polyimides

Experimental polyimides relatively rigid synthesized in effort to exploit some of advantages of rodlike polymers, while alleviating disadvantages. Polymers used to make colorless fibers and transparent films for optical and electronic application.

Chuang, Kathy C.↗

Lower temperature curing thermoset polyimides utilizing a substituted norbornene endcap

Methoxycarbonyl bridgehead substituted nadic diacid monomethyl ester, when used as an endcapping monomer, lowered the cure temperature of thermoset PMR polyimides without seriously affecting other desirable properties, such as glass transition temperature and thermal oxidative stability. The C-13 CP/MAS NMR of model compounds was used to follow the cure of resin systems using both the unmodified nadic endcap and the methoxycarbonyl-substituted endcap. Rheological analysis and differential scanning calorimetry DSC also provided evidence for the lower curing nature of the substituted endcap. Two regioisomers of the bridgehead-substituted endcap were isolated, and their chemical structures were elucidated by X-ray crystallography. The model compound and molecular modeling studies conducted ruled out the possibility of regioisomeric imide formation in the substituted endcaps.

Waters, John F.↗