Search NASA⌕ Search

Engineering topics

Yu, Lei

Publications and source records attributed to Yu, Lei.

At least 55 records · Page 3

Proteomic Profiling of the Substantia Nigra to Identify Determinants of Lewy Body Pathology and Dopaminergic Neuronal Loss

Proteinaceous aggregates containing ?-synuclein protein called Lewy bodies in the substantia nigra is a hallmark of Parkinson’s disease. The molecular mechanisms of Lewy body formation and associated neuronal loss remain largely unknown. To gain insights on proteins and pathways associated with Lewy body pathology, we performed quantitative profiling of the proteome. We analyzed substantia nigra tissue from 51 subjects arranged into three groups: cases with Lewy body pathology, Lewy body-negative controls with matching neuronal loss and controls with no neuronal loss. Using label-free LC-MS/MS approach we quantified the 2,963 most abundant proteins. Statistical testing for differential protein abundance, followed by pathway enrichment and Bayesian learning of the causal network structure were performed to identify likely drivers of Lewy body formation and dopaminergic neuronal loss. The identified pathways include (1) Arp2/3 complex-mediated actin nucleation; (2) synaptic function; (3) poly(A) RNA binding; (4) basement membrane and endothelium; and (5) hydrogen peroxide metabolic process. According to the data, the endothelial/basement membrane pathway is tightly connected with both pathologies and likely to be one of the drivers of the neuronal loss. The poly(A) RNA-binding proteins, including the ones relevant to other neurodegenerative disorders (e.g. TDP-43 and FUS) have strong inverse correlation with Lewy bodies and may reflect alternative mechanism of nigral neurodegeneration.

Petyuk, Vladislav A.↗

Process Engineering to Increase the Layered Phase Concentration in the Immediate Products of Flame Spray Pyrolysis

Flame-spray-pyrolysis (FSP) is a robust and scalable process to synthesize particles at the commodity-scale. FSP has been used to produce the precursor powders which were converted to the layered structure $(R\bar{3m} \text { phase})$ by a postannealing step in making nickel-rich cathode materials (NCMs). Theoretically, the high flame temperature (normally >1500 K) in FSP can provide adequate energy for the phase conversion from rock-salt to layered structures and potentially enables one-step synthesis. However, the high flame temperature is a critical issue to cause lithium loss and structural degradation, preventing the formation of the layered phase. Here, guided by the gaseous nucleation theory, we implemented several FSP processes with different solution recipes. The layered phase concentration in the as-burned products can be increased with the solution enthalpies. By adding a rapid quench step to suppress the lithium loss and phase degradation, the layered phase can be further increased. This work contributes new ideas to innovating process regarding the process efficiency and throughput of manufacturing cathode materials at a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(S)TEM-EELS as an advanced characterization technique for lithium-ion batteries

Although the lithium-ion battery (LIB) has acquired commercial success as a sustainable power source, it still suffers from multiple challenges for the future applications. In order to further develop next-generation batteries, the dynamics of structure change, charge transfer, and ion diffusion occurring inside the battery need to be deeply understood by advanced characterization techniques. (Scanning) transmission electron microscopy-electron energy loss spectroscopy ((S)TEM-EELS) is an effective method for the nano-scale detection of structural and chemical information in materials. Herein, this review systematically introduces the advantages and fundamentals of (S)TEM-EELS and its unique applications in LIBs.

25 ENERGY STORAGE↗

Understanding Co roles towards developing Co-free Ni-rich cathodes for rechargeable batteries

Reduction on cobalt reliance is an urgent requirement in the development of sustainable cathode materials for Li-ion batteries. Here the authors analyse the roles of cobalt and its interplay with other ions in high-nickel layered oxides, and deduce a material formula for promising cobalt-free cathodes. Current bottlenecks in cobalt (Co) supply have negatively impacted commercial battery production and inspired the development of cathode materials that are less reliant on Co. However, complete Co elimination is prevented by the lack of fundamental understanding of the impact of Co on cathode capacity and structural stability, as well as the lack of effective substitute components in practice. Here we investigate the roles of Co in purposely designed systems that include both Co-rich and Mn-substituted Co-free cathodes. Our results affirmed that Co plays an undeniable role in fast capacity and/or structural degradation, and found that Co is more destructive than Ni at high potentials, which offers unexpected but encouraging perspectives for Co reduction. Moreover, Mn substitution effectively alleviates the destructive effects of Co and enables a high potential functionality. Finally, with these fundamental discoveries, we demonstrated a series of LiNi α Mn β X γ O 2 (X = single or multiple dopants) as a promising candidate for Co-free cathodes.

25 ENERGY STORAGE↗

Size- and concentration-dependent Eu 2+ /Eu 3+ mixed luminescent characteristics of rare-earth-doped CaF 2 nanoparticles and their monolithic epoxy nanocomposites

CaF 2 is a promising luminescent host material for a wide range of applications, due to its high transparency, non-hygroscopy, low refractive index, low density, low backscattering efficiency, and abundance in nature. Here we report the photoluminescence (PL) and cathodoluminescence (CL) characteristics of rare-earth-doped CaF 2 nanoparticles and their composite monoliths with epoxy with visible emissions. The CaF 2 nanoparticles of ca. 36, 108 and 305 nm were prepared by a facile solution-mixing process and subsequent hydrothermal treatment. As the particle size decreases, the luminescence intensity increases for single-doped particles, while oppositely decreases for codoped particles because of energy transfer. Further, Eu 2+ - and Tb 3+ -codoped CaF 2 nanoparticles exhibit red emission, providing an efficient path for red emission through an energy transfer by Tb 3+ bridging without direct Eu 3+ doping. The effects of size and concentration are found to be pronounced in CL than PL, as the charge transfer between Eu 2+ and Eu 3+ reduces the concentration quenching in CL. The luminescence emission characteristics of epoxy/CaF 2 monoliths are different from those of particles due to the interactions with the epoxy molecules, and thus the energy transfer is hindered in PL while not in CL, enabling them for high-energy irradiation applications.

36 MATERIALS SCIENCE↗

Facile and scalable dry surface doping technique to enhance the electrochemical performance of LiNi 0.64 Mn 0.2 Co 0.16 O 2 cathode materials

Lithium nickel manganese cobalt oxide (NMC) is one of the dominant cathode materials in lithium-ion batteries. In this study a simple, efficient and scalable surface doping technique is successfully demonstrated, which can be readily used in mass production of cathode materials. For the first time neodymium oxide (Nd 2 O 3 ) has been employed as the surface doping agent. The Nd-doped NMC shows greatly improved cycling and rate performance, and the enhanced cycling stability has been demonstrated in full pouch cells, with a 17.5% increase in capacity retention after 300 cycles. Fewer cracks have been observed in the doped NMC after cycling, and in situ X-ray diffraction reveals the suppressed lattice collapse by Nd doping. Greatly suppressed surface phase change has been confirmed by HR-TEM and EELS. The result suggests great promise in using this dry doping technique to enhance the electrochemical performance of NMC cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Genetics of gene expression in the aging human brain reveal TDP-43 proteinopathy pathophysiology

Genetic variants that control distant gene expression are highly relevant for disease mechanisms but remain poorly charaterized. Here, leveraging the modular structure of gene coexpression in the aging human brain, we performed genome-wide association studies of gene coexpression modules and identified TMEM106B and RBFOX1 as module quantitative trait loci (modQTLs). The TMEM106B modQTL is a known risk locus of neurodegenerative TDP-43 proteinopathy and has a large-scale dominant transcriptomic effect including lysosomal and splicing dysregulation, recapitulating TDP-43 pathophysiology. Further, a locus in another TDP-43 proteinopathy risk gene, GRN, shows similar transcriptomic effects. TMEM106B and APOE/amyloid-ß converge on altered myelination/lysosomal gene expression, and jointly promote limbic-predominant age-related TDP-43 encephalopathy neuropathological change. Thus, genetic architecture of distant gene expression in the aging human brain elucidates TDP-43 proteinopathy pathophysiology.

Yang, Hyun-Sik↗

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a Li x TM 3-x O 4 -type spinel shell

The poor long-term cycling stability, including the fast capacity fade and the severe voltage decay, has become the main concern hindering the practical application of Li-rich layered oxides, a promising cathode for high- energy-density Li-ion battery. Herein, we design and electrochemically construct a ~10 nm-thick Li x TM 3-x O 4 - type (TM ¼Ni, Co, Mn, 0 3 O 4 -type spinel phase and the good Liþconductivity of LiMn 2 O 4 -type spinel phase. Systemic structural and electrochemical analysis demonstrate that, it slows down the activation rate of Li 2 MnO 3 component and efficiently alleviates the lattice O loss at high voltage (>4.5 V) and Mn dissolution, thereby suppressing the structural degradation from the layered phase to the spinel phase in the bulk, eventually significantly enhancing the long-term cycling stability. This study adds richness into the Mn-based spinel phase system and provides a new heterostructure design strategy to improve the electrochemical performance of Li-rich layered cathodes and beyond.

25 ENERGY STORAGE↗

Burning magnesium in carbon dioxide for highly effective phosphate removal

Magnesium oxide was found to have high-phosphate-affinity as an effective component to enhance the phosphate removal ability of common adsorbent materials. However, the currently prepared MgO-based hybrid adsorbents by conventional methods still suffer from the limited low loading of MgO and inferior removal performances, much far away from practical application. In this study, an ingenious carbon coated MgO nanocomposite is designed by directly burning magnesium in CO 2 , a well-known textbook reaction. X-ray diffraction analysis, scanning electron microscope and aberration-corrected high-resolution transmission electron microscope demonstrate the sample is well prepared. Consequently, the high content of nanosized MgO combined with defect-rich carbon layer brings unprecedented phosphate removal capacity of 1135.0 mg/g, removal rate of 99% and benign compatibility with coexisting anions and solution pH. Furthermore, the removal mechanism is also investigated in detail by characterizing the sample before and after adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Switchable encapsulation of polysulfides in the transition between sulfur and lithium sulfide

Encapsulation strategies are widely used for alleviating dissolution and diffusion of polysulfides, but they experience nonrecoverable structural failure arising from the repetitive severe volume change during lithium-sulfur battery cycling. Here we report a methodology to construct an electrochemically recoverable protective layer of polysulfides using an electrolyte additive. The additive nitrogen-doped carbon dots maintain their “dissolved” status in the electrolyte at the full charge state, and some of them function as active sites for lithium sulfide growth at the full discharge state. When polysulfides are present amid the transition between sulfur and lithium sulfide, nitrogen-doped carbon dots become highly reactive with polysulfides to form a solid and recoverable polysulfide-encapsulating layer. This design skilfully avoids structural failure and efficiently suppresses polysulfide shuttling. The sulfur cathode delivers a high reversible capacity of 891 mAh g -1 at 0.5 C with 99.5% coulombic efficiency and cycling stability up to 1000 cycles at 2 C.

25 ENERGY STORAGE↗

A novel reversible fluorescent probe for the highly sensitive detection of nitro and peroxide organic explosives using electrospun BaWO 4 nanofibers

Fabrication of highly stable, reversible, and efficient portable sensors for the detection of explosives for safety and security is challenging due to the robustness of the currently available detection tools, limiting their mass deployment to the explosion prone areas. This paper reports a new direction towards the sensing of nitro- and peroxide-based explosives using highly stable rare-earth-doped BaWO 4 nanofibers with remarkable sensitivity and reversibility. Here, BaWO 4 nanofibers doped with Tb 3+ and Eu 3+ ions are fabricated through a sol–gel electrospinning process, and their emission characteristics and application as a fluorescent probe for the sensing of 2-nitrotoluene and H 2 O 2 , explosive taggants representing a broad class of explosives, are studied in detail. Scheelite structured BaWO 4 nanofibers exhibit excellent luminescence characteristics, and the rare-earth ion doping in the polycrystalline BaWO 4 nanofibers is tailored to achieve blue, green, red, and white light emissions. These nanofibers are extremely sensitive to 2-nitrotoluene and H 2 O 2 with rapid response time, and sensitivity is observed within the range of 1–400 ppb and 1–10 ppm, towards 2-nitrotoluene and H 2 O 2 , respectively. The fluorescence quenching of BaWO 4 nanofibers in the presence of 2-nitrotoluene and H 2 O 2 is exponential with the quenching constants up to 1.73 × 10 6 and 2.73 × 10 4 L mol –1 , respectively, which are significantly higher than those of most of the fluorescent probes based on metal–organic frameworks and conjugated organic materials. After exposing to 2-nitrotoluene, the luminescence of the nanofibers is retained completely upon heating at 120 °C for 10 min and the sensory response is retained as fresh nanofibers, and currently available fluorescent explosive sensors could not achieve such a recovery. The high sensitivity and selectivity of scalable rare-earth-doped BaWO 4 nanofibers provide a new platform for the simultaneous detection of two classes of explosives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between manganese dissolution and dynamic phase stability in spinel-based lithium-ion battery

Historically long accepted to be the singular root cause of capacity fading, transition metal dissolution has been reported to severely degrade the anode. However, its impact on the cathode behavior remains poorly understood. Here we show the correlation between capacity fading and phase/surface stability of an LiMn 2 O 4 cathode. It is revealed that a combination of structural transformation and transition metal dissolution dominates the cathode capacity fading. LiMn 2 O 4 exhibits irreversible phase transitions driven by manganese(III) disproportionation and Jahn-Teller distortion, which in conjunction with particle cracks results in serious manganese dissolution. Meanwhile, fast manganese dissolution in turn triggers irreversible structural evolution, and as such, forms a detrimental cycle constantly consuming active cathode components. Furthermore, lithium-rich LiMn 2 O 4 with lithium/manganese disorder and surface reconstruction could effectively suppress the irreversible phase transition and manganese dissolution. These findings close the loop of understanding capacity fading mechanisms and allow for development of longer life batteries.

25 ENERGY STORAGE↗

Highly crystalline sodium manganese ferrocyanide microcubes for advanced sodium ion battery cathodes

The microstructure and morphology of the crystal play an important role in the physical and electrochemical properties of electrode materials. Here we report a highly crystalline microcube structure of Na-rich Prussian white Na 1.92 Mn[Fe(CN) 6 ] 0.98 for sodium ion battery cathodes. The obtained structure features high crystallinity of the monoclinic structure with an average cubic size of 3–5 μm. Because of the improvement on microstructural and electrical properties, the cathode design enables promising electrochemical performance. The electrode exhibits an outstanding rate performance with reversible capacities of 152.8 mA h g –1 (10 mA g –1 ), 128.1 mA h g –1 (100 mA g –1 ), 118.7 mA h g –1 (500 mA g –1 ) and 110.3 mA h g –1 (1000 mA g –1 ). It also exhibits a good cycling performance with a capacity retention of 82% after 500 cycles at 100 mA g –1 . More importantly, the XRD analysis reveals a highly reversible monoclinic–cubic–monoclinic structural evolution of the cathode upon Na + extraction/insertion. The good rate and cycling performance can be attributed to the robust crystal structure with few defects and fast Na + transfer kinetics. The high purity single crystal morphology can also reduce the side reactions on the electrode/electrolyte interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic behavior of nanoscale liquids in graphene liquid cells revealed by in situ transmission electron microscopy

Recent advances in graphene liquid cells for in situ transmission electron microscopy (TEM) have opened many opportunities for the study of materials transformations and chemical reactions in liquids with high spatial resolution. However, the behavior of thin liquids encapsulated in a graphene liquid cell has not been fully understood. Here, we report real time TEM imaging of the nanoscale dynamic behavior of liquids in graphene nanocapillaries. Our observations reveal that the interfaces between liquid and gas bubble can fluctuate, leading to the generation of liquid nanodroplets near the interfaces. Liquid nanodroplets often show irregular shape with dynamic changes of their configuration under the electron beam. We consider that the dynamic motion of liquid-gas interfaces might be introduced by the electrostatic energy from transiently charged interfaces. We find that improving the wettability of graphene liquid cells by ultraviolet-ozone treatment can significantly modify the dynamic motion of the encapsulated liquids. Our study provides valuable information of the interactions between liquid and graphene under the electron beam, and it also offers key insights on the nanoscale fluid dynamics in confined spaces.

36 MATERIALS SCIENCE↗

Enhanced Electrochemical Performance of Sodium Manganese Ferrocyanide by Na 3 (VOPO 4 ) 2 F Coating for Sodium-Ion Batteries

Sodium manganese ferrocyanide Na x Mn[Fe(CN) 6 ] y is an attractive cathode material for sodium-ion batteries. However, NaxMn[Fe(CN) 6 ] y prepared by simple coprecipitation of Mn 2+ and [Fe(CN) 6 ] 4– usually shows poor cycling performance, which hinders its practical application. In this work, electrochemical performance of a Na 1.6 Mn[Fe(CN) 6 ] 0.9 (PBM) sample prepared by the simple precipitation method was greatly improved by coating with Na 3 (VOPO 4 ) 2 F (NVOPF) via a solution precipitation method. The as-prepared PBM@NVOPF with a coating quantity of 2.0% molar ratio showed enhanced rate capability and superior cyclic stability. The discharge capacities of PBM@NVOPF were 101.5 mA h g –1 (1 C) and 91.4 mA h g –1 (10 C), with a capacity retention of 84.3% after 500 cycles at 1 C, 20 °C. It also exhibited excellent cyclic stability at elevated temperature with an initial capacity of 109.5 mA h g –1 and a capacity retention of 78.8% after 200 cycles at 1 C, 55 °C. In comparison, uncoated PBM showed a discharge capacity of 105.7 mA h g–1 (1 C) and 76.7 mA h g –1 (10 C), with a capacity retention of only 42.0% after 500 cycles at 1 C, 20 °C. The high-temperature performance of bare PBM was very poor, and the capacity retention was only 35.7% after 40 cycles because of serious Mn/Fe dissolution which caused structural deterioration of PBM. NVOPF coating protected the PBM from suffering corrosion in the electrolyte, thus ensured the framework stability of PBM during long-term cycling and contributed to the excellent electrochemical performance.

25 ENERGY STORAGE↗

Synergistic Doping and Intercalation: Realizing Deep Phase Modulation on MoS 2 Arrays for High-Efficiency Hydrogen Evolution Reaction

A synergistic N doping plus PO 4 3- intercalation strategy is used to induce high conversion (ca. 41%) of 2H-MoS 2 into 1T-MoS, which is much higher than single N doping (ca. 28 %) or single PO 4 3- intercalation ca. 10%). A scattering mechanism is proposed to illustrate the synergistic phase transformation from the 2H to the 1T phase, which was confirmed by synchrotron radiation and.spherical aberration TEM. To further enhance reaction kindies, the designed (N, PO 4 3- )-MoS 2 nanosheds are combined with conductive vertical graphene (VG) skeleton forming binder-free arrays fir high efficiencyhydrogen evolution reaction (HER). Owing 10 the decreased band gap, lower d-band censer, and smaller hydrogen adsorption/desorption energy, the designed (NPO 4 3- )-MoSJVG electrode shows excellent HER perfor mance with a lower Tafel slope and overpotential than N-MoS 2 /VG, PO 4 3- -MoS 2 /VG counterparts, and other Mo-base catalysts in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗