Search NASA⌕ Search

Engineering topics

Yu, Li Hua

Publications and source records attributed to Yu, Li Hua.

Measurement of seasonal variations of the NSLS-II circumference and energy

Routine beam-based characterization of the NSLS-II storage ring indicated probable seasonal variations of the ring circumference and energy. We arranged regular direct measurements of the ring circumference during 2023 and compared the results with the archived data of the magnet and undulator settings. A clear correlation between the ring circumference and energy was observed. These seasonal variations of the ring energy are found to be the main reason for regular lattice corrections required to keep the machine performance stable for user operations. Finally, the measurement techniques and results are discussed in this article.

36 MATERIALS SCIENCE↗

Power loss analysis for optical cavity of X-ray free-electron laser oscillator at 10 KeV

We investigate properties of optical elements in the optical cavity of an X-ray free electron laser oscillator with emphasis on power loss of a monochromatic Gaussian radiation beam upon passing through them using analytical and numerical approaches. Here we assume the optical cavity comprises of refractive lenses and Bragg crystals exploiting symmetric Bragg scattering. For lens, we include the focusing and curvature effects while we include the angular filtering due to finite Darwin width of Bragg crystals. Our results indicate feasibility of Xray power outcoupling in the range of 0.5-28 % with intra-cavity reflectivity of 67-95 % at 10.321 KeV.

43 PARTICLE ACCELERATORS↗

Numerical simulation of NSLS-II fast orbit feedback system

We discuss recent work on the construction of a numerical simulation of the fast orbit feedback system at NSLS-II. The simulation operates in the time domain and also includes the spatial domain, i.e. all beam position monitors (BPMs) and correctors. It can accept inputs of the real beam orbit and the measured orbit response matrix. It can also add errors to every stage of the calculation. We present methods to verify the simulation results by comparing the simulation results with experimental data collected at NSLS-II. The results are in very good agreement. The effects of errors from BPMs and correctors, as well as the amplitude of excitation, on the feedback performance, are also explored. This simulation can be used to predict the behavior and performance of the system for a future upgrade.

36 MATERIALS SCIENCE↗

Medium Energy Hard X-ray FEL Gain

We develop a tool for calculation to study the conditions for a hard x-ray FEL oscillator based on electron beam in the medium enegy range from 3 to 4.5GeV. We show that the approach developed by K.J. Kim, et.al. for the small signal low gain formula can be modified so that the gain can be derived wihout taking the “no focusing approximation” adopted in the approach, so that a strong focusing can be applied. We also derive the formula to allow for gain calculation of harmonic lasing. The gain in this formula can be cast in the form of a product of two factors with one of them only depends on harmonic number, undulator period and gap. Thus this factor can be used to show that it is favorable to use harmonic lasing to achieve hard x-ray FEL working in the medium energy range and in the small signal low gain regime.

36 MATERIALS SCIENCE↗

Recent improvements in beam orbit feedback at NSLS-II

This paper discusses improvements made to the fast orbit feedback (FOFB) system at NSLS-II in 2019. We first characterized the system by measuring the transfer function and the closed-loop gain of the system. We also constructed a model to predict the performance, which was based on physical behaviors. After finding and fixing the sources of the latency, we improved the closed-loop gain’s bandwidth from 250 Hz to 400 Hz in the horizontal plane and 250 Hz to 300 Hz in the vertical plane. As a result, the orbit beam instability improved by 30% and 10% in the horizontal and vertical planes, respectively.

36 MATERIALS SCIENCE↗