Search NASA⌕ Search

Engineering topics

Yu, Xiaofei

Publications and source records attributed to Yu, Xiaofei.

Direct-bonded diamond membranes for heterogeneous quantum and electronic technologies

Diamond has superlative material properties for a broad range of quantum and electronic technologies. However, heteroepitaxial growth of single crystal diamond remains limited, impeding integration and evolution of diamond-based technologies. Here, we directly bond single-crystal diamond membranes to a wide variety of materials including silicon, fused silica, sapphire, thermal oxide, and lithium niobate. Our bonding process combines customized membrane synthesis, transfer, and dry surface functionalization, allowing for minimal contamination while providing pathways for near unity yield and scalability. We generate bonded crystalline membranes with thickness as low as 10 nm, sub-nm interfacial regions, and nanometer-scale thickness variability over 200 by 200 μm 2 areas. We measure spin coherence times T 2 for nitrogen vacancy centers in 150 nm-thick bonded membranes of up to 623 ± 21 μs, suitable for advanced quantum applications. We demonstrate multiple methods for integrating high quality factor nanophotonic cavities with the diamond heterostructures, highlighting the platform versatility in quantum photonic applications. Furthermore, we show that our ultra-thin diamond membranes are compatible with total internal reflection fluorescence (TIRF) microscopy, which enables interfacing coherent diamond quantum sensors with living cells while rejecting unwanted background luminescence. The processes demonstrated herein provide a full toolkit to synthesize heterogeneous diamond-based hybrid systems for quantum and electronic technologies.

color center↗

Biocompatible surface functionalization architecture for a diamond quantum sensor

Significance Diamond-based quantum sensing enables nanoscale measurements of biological systems with unprecedented sensitivity. Potential applications of this emerging technology range from the investigation of fundamental biological processes to the development of next-generation medical diagnostics devices. One of the main challenges faced by bioquantum sensing is the need to interface quantum sensors with biological target systems. Specifically, such an interface needs to maintain the highly fragile quantum states of our sensor and at the same time be able to fish intact biomolecules out of solution and immobilize them on our quantum sensor surface. Our work overcomes these challenges by combining tools from quantum engineering, single-molecule biophysics, and material processing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adaptive Circuit Learning for Quantum Metrology

Quantum sensing is an important application of emerging quantum technologies. We explore whether a hybrid system of quantum sensors and quantum circuits can surpass the classical limit of sensing. In particular, we use optimization techniques to search for encoder and decoder circuits that scalably improve sensitivity under given application and noise characteristics. Furthermore, our approach uses a variational algorithm that can learn a quantum sensing circuit based on platform-specific control capacity, noise, and signal distribution. The quantum circuit is composed of an encoder which prepares the optimal sensing state and a decoder which gives an output distribution containing information of the signal. We optimize the full circuit to maximize the Signal-to-Noise Ratio (SNR). Furthermore, this learning algorithm can be run on real hardware scalably by using the "parameter-shift" rule which enables gradient evaluation on noisy quantum circuits, avoiding the exponential cost of quantum system simulation. We demonstrate up to 13.12x SNR improvement over existing fixed protocol (GHZ), and 3.19x Classical Fisher Information (CFI) improvement over the classical limit on 15 qubits using IBM quantum computer. More notably, our algorithm overcomes the decreasing performance of existing entanglement-based protocols with increased system sizes.

42 ENGINEERING↗

Real-time mass spectrometric characterization of the solid–electrolyte interphase of a lithium-ion battery

Solid-electrolyte interphase (SEI) is a key component that dictates the performance of most electrochemical devices, but the understanding of its chemistry and structure has been limited by the lack of in-situ tools. In this work, we report SEI live-formation in Li-ion battery under operando condition with liquid secondary ion mass spectrometry (SIMS), which, in combination with molecular dynamics (MD) simulation, presents the first dynamic picture with molecular-accuracy about this key component. Before any interphasial chemistry occurs during the initial charging, an electric double layer forms at the electrode-electrolyte interface via the self-assembly of solvent molecules directed by both Li+ and potential of the electrified surface. Such double layer structure predicts the eventual interphasial chemistries formed from the electrolytes, where the negatively-charged electrode surface repels salt anions from the inner-Helmholtz layer and results in an inner SEI that is thin, dense and inorganic in nature but LiF-depleted. It was this dense layer that exercises the major functions of an interphase, i.e., conducting Li+ but insulating electrons. An outer layer that is electrolyte-permeable and organic-rich appears after formation of the inner SEI. In highly-concentrated electrolyte, the presence of LiF in the inner-SEI is raised due to the high population of salt anions in the double layer. These real-time observations at nano-scale reveal in general sense how an interphase inherits chemistry from inner-Helmholtz layer structure, and establish guidelines in engineering desirable interphases for the future battery chemistries.

Zhou, Yufan↗

Dark air–liquid interfacial chemistry of glyoxal and hydrogen peroxide

The air-liquid (a-l) interfacial chemistry of glyoxal is of great interest in atmospheric chemistry. We present molecular imaging of glyoxal and hydrogen peroxide (H 2 O 2 ) dark aging using in situ time-of-flight secondary ion mass spectrometry (ToF-SIMS). More organic peroxides and cluster ions are observed at the a-l interface in dark aging compared to UV aging. Cluster ions formed with more water molecules in dark aging indicate that aqueous secondary organic aerosols (aqSOA) could form hydrogen bond with water molecules, suggesting that aqSOA at the aqueous phase are more hydrophilic. Thus the interfacial aqSOA in dark aging could increase hygroscopic growth. Strong contribution of cluster ions and large water clusters in dark aging indicates change of solvation shells at the a-l interface. The observation of organic peroxides and cluster ions indicates that the aqueous surface could be a reservoir of organic peroxides and odd hydrogen radicals at night. Our findings provide new understandings of glyoxal a-l interfacial chemistry and fill in the gap between field measurements and the climate model simulation of SOA.

54 ENVIRONMENTAL SCIENCES↗

Evolution of aqSOA from the Air–Liquid Interfacial Photochemistry of Glyoxal and Hydroxyl Radicals

The effect of photochemical reaction time on glyoxal and hydrogen peroxide at the aqueous surface is investigated using in situ time-of-flights Secondary ion mass spectrometry (ToF-SIMS) enabled by a system for analysis at the liquid vacuum interface (SALVI) microreactor. Carboxylic acids (i.e., glyoxylic acid, oxalic acid, malonic acid, tartaric acid) are observed in the initial reactions (i.e., < 3 h.), more oligomers, cluster ions, and water clusters formed in the long ultraviolet (UV) aging period (i.e., = 3 h). Our results provide the direct evidence that water clusters could promote proton transfer and facilitate the formation of oligomers and cluster ions in the aqeous environment as photochemical aging continues. Furthermore, new chemical reaction pathways are proposed to expand existing understanding. The temporal evolution shows that oxidation products such as carboxylic acids reach a maximum in 1 h, whereas oligomer yields peak in 3 to 4 h. Glyoxal not only undergoes oxidation to form carboxylic acids (mainly occurred in the aging time less than 3 h), but also takes part in radical reactions, hemiacetal, oligomerization, polymerization, esterification, and anhydride reactions to form higher molecular weight species. Our in situ findings verify that the air-liquid interfacial reactions are important pathways for aqueous secondary organic aerosol (aqSOA) formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Molecular Evidence of Proton Transfer and Mass Dynamics at the Electrode–Electrolyte Interface

Proton transfer has been widely regarded as a key step in many electrochemical and biological processes. However, direct molecular evidence has long been lacking. In this work, we chose the electrochemical oxidation of acetaminophen (APAP) as a model system and utilized in situ liquid time-of-flight secondary ion mass spectroscopy (ToF-SIMS) to molecularly examine proton solvation and transfer in this process. In addition, we successfully captured and identified the transient radical intermediate, providing solid molecular evidence to resolve an important debate in electron transfer-proton transfer oxidation mechanism of APAP. Moreover, the potential-dependent behaviors of both inert ions and electroactive species during the dynamic potential scanning were chemically monitored in real time and the mass diffusion mechanism regarding the electroactive and non-electroactive species was revealed under polarized conditions. The results are well consistent with our computer simulation. The observations in this work greatly improved the comprehensive understanding of proton transfer and mass dynamics occurring at the electrode-electrolyte interface involved in complex electrochemical processes.

Wang, Jun-Gang↗

Potential-Dynamic Surface Chemistry Controls the Electrocatalytic Processes of Ethanol Oxidation on Gold Surfaces

Electro-catalysis has various important applications especially fuel cells. As a key element in electro-catalysis, the surface chemistry of electro-catalysts may strongly influence the catalytic activity and reaction mechanism, the fundamental understanding of which would provide guidance for designing high-efficiency catalysts. Herein, we utilized our recently developed in situ liquid SIMS approach to investigate the electro-catalytic oxidation of ethanol on gold surfaces in alkaline environments involved in direct alcohol fuel cells. Formation of adsorbed hydroxide intermediates on the gold surfaces upon electro-oxidation was molecularly witnessed under operando conditions, the evolution of which was revealed to govern the electro-catalytic processes. Moreover, the hydroxide intermediates as active sites participated in the reaction through transferring nucleophilic hydroxyl groups into the adjacent ethanol molecules. This work brings new light into electro-catalytic research and will facilitate the improvement of catalytic systems on the basis of surface chemistry-catalytic performance relationship.

Zhang, Yanyan↗

Investigation of Ion-Solvent Interactions in Nonaqueous Electrolytes Using in Situ Liquid SIMS

Ion-solvent interactions in non-aqueous electrolytes are of fundamental interest and practical importance, yet debates regarding ion preferential solvation and coordination numbers persist. In this work, in situ liquid SIMS was used to examine ion-solvent interactions in three representative electrolytes, i.e., lithium hexafluorophosphate (LiPF6) at 1.0 M in ethylene carbonate (EC)-dimethyl carbonate (DMC), and lithium bis(fluorosulfonyl)imide (LiFSI) at both low (1.0 M) and high (4.0 M) concentrations in 1,2-dimethoxyethane (DME). In the positive ion mode, solid molecular evidence strongly supports the preferential solvation of Li+ by EC. Besides, from the negative spectra, we also found that PF6- forms association with EC, which has been neglected by previous studies due to the relatively weak interaction. While in both LiFSI in DME electrolytes, no evidence shows that FSI- is associated with DME. Furthermore, strong salt ion cluster signals were observed in the 1.0 M LiPF6 in EC-DMC electrolyte, suggesting that a significant amount of Li+ ions stay in vicinity of anions. In sharp comparison, weak ion cluster signals were detected in dilute LiFSI in DME electrolyte, suggesting most ions are well separated, in agreement with our molecular dynamics (MD) simulation results. These findings indicate that with virtues of little bias on detecting positive and negative ions and the capability of directly analyzing concentrated electrolytes, in situ liquid SIMS is a powerful tool that can provide key evidence for improved understanding on the ion-solvent interactions in non-aqueous electrolytes. Therefore, we anticipate wide applications of in situ liquid SIMS on investigations of various ion-solvent interactions in the near future.

Zhang, Yanyan↗

In Situ Characterization of Shewanella oneidensis MR1 Biofilms by SALVI and ToF-SIMS

Bacterial biofilms are surface-associated communities that are vastly studied to understand their self-produced extracellular polymeric substances (EPS) and their roles in environmental microbiology. This study outlines a method to cultivate biofilm attachment to the System for Analysis at the Liquid Vacuum Interface (SALVI) and achieve in situ chemical mapping of a living biofilm by time-of-flight secondary ion mass spectrometry (ToF-SIMS). This is done through the culturing of bacteria both outside and within the SALVI channel with our specialized setup, as well as through optical imaging techniques to detect the biofilm presence and thickness before ToF-SIMS analysis. Our results show the characteristic peaks of the Shewanella biofilm in its natural hydrated state, highlighting upon its localized water cluster environment, as well as EPS fragments, which are drastically different from the same biofilm’s dehydrated state. These results demonstrate the breakthrough capability of SALVI that allows for in situ biofilm imaging with a vacuum-based chemical imaging instrument.

59 BASIC BIOLOGICAL SCIENCES↗

Improving the Molecular Ion Signal Intensity for In Situ Liquid SIMS Analysis

In situ liquid secondary ion mass spectrometry (SIMS) enabled by system for analysis at the liquid vacuum interface (SALVI) has proven to be a promising new tool to provide molecular information at solid–liquid and liquid–vacuum interfaces. However, the initial data showed that useful signals in positive ion spectra are too weak to be meaningful in most cases. In addition, it is difficult to obtain strong negative molecular ion signals when m/z>200. These two drawbacks have been the biggest obstacle towards practical use of this new analytical approach. In this study, we report that strong and reliable positive and negative molecular signals are achievable after optimizing the SIMS experimental conditions. Four model systems, including a 1,8-diazabicycloundec-7-ene (DBU)-base switchable ionic liquid, a live Shewanella oneidensis biofilm, a hydrated mammalian epithelia cell, and an electrolyte popularly used in Li ion batteries were studied. A signal enhancement of about two orders of magnitude was obtained in comparison with non-optimized conditions. Therefore, molecular ion signal intensity has become very acceptable to use for in situ liquid SIMS to study solid–liquid and liquid–vacuum interfaces.

36 MATERIALS SCIENCE↗