Search NASA⌕ Search

Engineering topics

Yu, Yi

Publications and source records attributed to Yu, Yi.

At least 55 records · Page 3

Anisotropic phase segregation and migration of Pt in nanocrystals en route to nanoframe catalysts

Compositional heterogeneity in shaped, bimetallic nanocrystals offers additional variables to manoeuvre the functionality of the nanocrystal. However, understanding how to manipulate anisotropic elemental distributions in a nanocrystal is a great challenge in reaching higher tiers of nanocatalyst design. In this study, we present the evolutionary trajectory of phase segregation in Pt-Ni rhombic dodecahedra. The anisotropic growth of a Pt-rich phase along the $\langle$111$\rangle$ and $\langle$200$\rangle$ directions at the initial growth stage results in Pt segregation to the 14 axes of a rhombic dodecahedron, forming a highly branched, Pt-rich tetradecapod structure embedded in a Ni-rich shell. With longer growth time, the Pt-rich phase selectively migrates outwards through the 14 axes to the 24 edges such that the rhombic dodecahedron becomes a Pt-rich frame enclosing a Ni-rich interior phase. The revealed anisotropic phase segregation and migration mechanism offers a radically different approach to fabrication of nanocatalysts with desired compositional distributions and performance.

36 MATERIALS SCIENCE↗

Directed Assembly of Nanoparticle Catalysts on Nanowire Photoelectrodes for Photoelectrochemical CO 2 Reduction

Reducing carbon dioxide with a multicomponent artificial photosynthetic system, closely mimicking nature, represents a promising approach for energy storage. Previous works have focused on exploiting light-harvesting semiconductor nanowires (NW) for photoelectrochemical water splitting. With the newly developed CO 2 reduction nanoparticle (NP) catalysts, direct interfacing of these nanocatalysts with NW light absorbers for photoelectrochemical reduction of CO 2 becomes feasible. Here, we demonstrate a directed assembly of NP catalysts on vertical NW substrates for CO 2 -to-CO conversion under illumination. Guided by the one-dimensional geometry, well-dispersed assembly of Au 3 Cu NPs on the surface of Si NW arrays was achieved with facile coverage tunability. Such Au 3 Cu NP decorated Si NW arrays can readily serve as effective CO 2 reduction photoelectrodes, exhibiting high CO 2 -to-CO selectivity close to 80% at -0.20 V vs RHE with suppressed hydrogen evolution. A reduction of 120 mV overpotential compared to the planar (PL) counterpart was observed resulting from the optimized spatial arrangement of NP catalysts on the high surface area NW arrays. In addition, this system showed consistent photoelectrochemical CO 2 reduction capability up to 18 h. Furthermore, this simple photoelectrode assembly process will lead to further progress in artificial photosynthesis, by allowing the combination of developments in each subfield to create an efficient light-driven system generating carbon-based fuels.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Molecular Surface Functionalization Approach to Tuning Nanoparticle Electrocatalysts for Carbon Dioxide Reduction

Conversion of the greenhouse gas carbon dioxide (CO 2 ) to value-added products is an important challenge for sustainable energy research, and nanomaterials offer a broad class of heterogeneous catalysts for such transformations. Here we report a molecular surface functionalization approach to tuning gold nanoparticle (Au NP) electrocatalysts for reduction of CO 2 to CO. The N -heterocyclic (NHC) carbene-functionalized Au NP catalyst exhibits improved faradaic efficiency (FE = 83%) for reduction of CO 2 to CO in water at neutral pH at an overpotential of 0.46 V with a 7.6-fold increase in current density compared to that of the parent Au NP (FE = 53%). Tafel plots of the NHC carbene-functionalized Au NP (72 mV/decade) vs parent Au NP (138 mV/decade) systems further show that the molecular ligand influences mechanistic pathways for CO 2 reduction. The results establish molecular surface functionalization as a complementary approach to size, shape, composition, and defect control for nanoparticle catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal Transport in Silicon Nanowires at High Temperature up to 700 K

Thermal transport in silicon nanowires has captured the attention of scientists for understanding phonon transport at the nanoscale, and the thermoelectric figure-of-merit (ZT) reported in rough nanowires has inspired engineers to develop cost-effective waste heat recovery systems. Thermoelectric generators composed of silicon target high-temperature applications due to improved efficiency beyond 550 K. However, there have been no studies of thermal transport in silicon nanowires beyond room temperature. High-temperature measurements also enable studies of unanswered questions regarding the impact of surface boundaries and varying mode contributions as the highest vibrational modes are activated (Debye temperature of silicon is 645 K). Here, we develop a technique to investigate thermal transport in nanowires up to 700 K. Furthermore, our thermal conductivity measurements on smooth silicon nanowires show the classical diameter dependence from 40 to 120 nm. In conjunction with Boltzmann transport equation, we also probe an increasing contribution of high-frequency phonons (optical phonons) in smooth silicon nanowires as the diameter decreases and the temperature increases. Thermal conductivity of rough silicon nanowires is significantly reduced throughout the temperature range, demonstrating a potential for efficient thermoelectric generation (e.g., ZT = 1 at 700 K).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Composition Tunable and Highly Luminescent Cesium Lead Halide Nanowires through Anion-Exchange Reactions

In this paper, we demonstrate the successful synthesis of brightly emitting colloidal cesium lead halide (CsPbX 3 , X = Cl, Br, I) nanowires (NWs) with uniform diameters and tunable compositions. By using highly monodisperse CsPbBr 3 NWs as templates, the NW composition can be independently controlled through anion-exchange reactions. CsPbX 3 alloy NWs with a wide range of alloy compositions can be achieved with well-preserved morphology and crystal structure. The NWs are highly luminescent with photoluminescence quantum yields (PLQY) ranging from 20% to 80%. The bright photoluminescence can be tuned over nearly the entire visible spectrum. The high PLQYs together with charge transport measurements exemplify the efficient alloying of the anionic sublattice in a one-dimensional CsPbX 3 system. Finally, the wires increased functionality in the form of fast photoresponse rates and the low defect density suggest CsPbX 3 NWs as prospective materials for optoelectronic applications.

36 MATERIALS SCIENCE↗

Atomic Structure of Ultrathin Gold Nanowires

Understanding of the atomic structure and stability of nanowires (NWs) is critical for their applications in nanotechnology, especially when the diameter of NWs reduces to ultrathin scale (1-2 nm). Here, using aberration-corrected high-resolution transmission electron microscopy (AC-HRTEM), we report a detailed atomic structure study of the ultrathin Au NWs, which are synthesized using a silane-mediated approach. The NWs contain large amounts of generalized stacking fault defects. These defects evolve upon sustained electron exposure, and simultaneously the NWs undergo necking and breaking. Quantitative strain analysis reveals the key role of strain in the breakdown process. Besides, ligand-like morphology is observed at the surface of the NWs, indicating the possibility of using AC-HRTEM for surface ligand imaging. Moreover, the coalescence dynamic of ultrathin Au NWs is demonstrated by in situ observations. This study provides a comprehensive understanding of the structure of ultrathin metal NWs at atomic-scale and could have important implications for their applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low-Temperature Solution-Phase Growth of Silicon and Silicon-Containing Alloy Nanowires

Low-temperature synthesis of crystalline silicon and silicon-containing nanowires remains a challenge in synthetic chemistry due to the lack of sufficiently reactive Si precursors. We report that colloidal Si nanowires can be grown using tris(trimethylsilyl)silane or trisilane as the Si precursor by a Ga-mediated solution-liquid-solid (SLS) approach at temperatures of about 200 °C, which is more than 200 °C lower than that reported in the previous literature. We further demonstrate that the new Si chemistry can be adopted to incorporate Si atoms into III-V semiconductor lattices, which holds promise to produce a new Si-containing alloy semiconductor nanowire. This development represents an important step toward low-temperature fabrication of Si nanowire-based devices for broad applications.

36 MATERIALS SCIENCE↗

Synthesis of PtCo 3 polyhedral nanoparticles and evolution to Pt 3 Co nanoframes

Bimetallic nanoframes have great potential for achieving new levels of catalytic activity in various heterogeneous reactions due to their high surface area dispersion of expensive noble metals on the exterior and interior surfaces of the structure. PtCo 3 nanoparticles with polyhedral shapes were synthesized by a hot-injection method. Scanning transmission electron microscopy combined with energy dispersive X-ray spectroscopy (EDS) showed that these nanoparticles demonstrated elemental segregation of platinum to the edges of the polyhedron, forming the basis for a framework nanostructure. The process of preferential oxidative leaching which removed cobalt from the interior of the framework was tracked by EDS and inductively coupled plasma optical emission spectroscopy. This evolution procedure left the platinum-rich edges intact to form a Pt 3 Co nanoframe. Finally, this is the first reported synthesis of a platinum-cobalt nanoframe and could have potential applications in catalytic reactions such as oxygen reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically thin two-dimensional organic-inorganic hybrid perovskites

Organic-inorganic hybrid perovskites, which have shown to be promising semiconductor materials for photovoltaic applications, have been made into atomically thin two-dimensional (2D) sheets. We report the solution-phase growth of single- and few-unit-cell-thick single-crystalline 2D hybrid perovskites of (C 4 H 9 NH 3 ) 2 PbBr 4 with well-defined square shape and large size. Different from the other 2D materials, the hybrid perovskite sheets exhibit an unusual structural relaxation, and this structural change leads to a band gap shift as compared to the bulk crystal. The high-quality 2D crystals exhibit efficient photoluminescence, and color tuning could be achieved by changing sheet thickness as well as composition via the synthesis of related materials.

Dou, Letian↗

Hybrid bioinorganic approach to solar-to-chemical conversion

Significance Natural photosynthesis, a process of solar-to-chemical conversion, uses light, water, and carbon dioxide to generate the chemical products needed to sustain life. Here we report a strategy inspired by photosynthesis in which compatible inorganic and biological components are used to transform light, water, and carbon dioxide to the value-added product methane. Specifically, this solar-to-chemical conversion platform interfaces photoactive inorganic materials that produce hydrogen from water and sunlight with microorganisms that consume this sustainably derived hydrogen to drive the transformation of carbon dioxide to methane with high efficiency. This system establishes a starting point for a broader materials biology approach to the synthesis of more complex chemical products from carbon dioxide and water.

Nichols, Eva M.↗

The enterococcal cytolysin synthetase has an unanticipated lipid kinase fold

The enterococcal cytolysin is a virulence factor consisting of two post-translationally modified peptides that synergistically kill human immune cells. Both peptides are made by CylM, a member of the LanM lanthipeptide synthetases. CylM catalyzes seven dehydrations of Ser and Thr residues and three cyclization reactions during the biosynthesis of the cytolysin large subunit. We present here the 2.2 Å resolution structure of CylM, the first structural information on a LanM. Unexpectedly, the structure reveals that the dehydratase domain of CylM resembles the catalytic core of eukaryotic lipid kinases, despite the absence of clear sequence homology. The kinase and phosphate elimination active sites that affect net dehydration are immediately adjacent to each other. Characterization of mutants provided insights into the mechanism of the dehydration process. The structure is also of interest because of the interactions of human homologs of lanthipeptide cyclases with kinases such as mammalian target of rapamycin.

Dong, Shi-Hui↗

Stabilization of 4H hexagonal phase in gold nanoribbons

Gold, silver, platinum and palladium typically crystallize with the face-centred cubic structure. Here we report the high-yield solution synthesis of gold nanoribbons in the 4H hexagonal polytype, a previously unreported metastable phase of gold. These gold nanoribbons undergo a phase transition from the original 4H hexagonal to face-centred cubic structure on ligand exchange under ambient conditions. Using monochromated electron energy-loss spectroscopy, the strong infrared plasmon absorption of single 4H gold nanoribbons is observed. Furthermore, the 4H hexagonal phases of silver, palladium and platinum can be readily stabilized through direct epitaxial growth of these metals on the 4H gold nanoribbon surface. Our findings may open up new strategies for the crystal phase-controlled synthesis of advanced noble metal nanomaterials.

Science & Technology - Other Topics↗

Growth and Anion Exchange Conversion of CH 3 NH 3 PbX 3 Nanorod Arrays for Light-Emitting Diodes

The nanowire and nanorod morphology offers great advantages for application in a range of optoelectronic devices, but these high-quality nanorod arrays are typically based on high temperature growth techniques. Here, we demonstrate the successful room temperature growth of a hybrid perovskite (CH 3 NH 3 PbBr 3 ) nanorod array, and we also introduce a new low temperature anion exchange technique to convert the CH 3 NH 3 PbBr 3 nanorod array into a CH 3 NH 3 PbI 3 nanorod array while preserving morphology. We demonstrate the application of both these hybrid perovskite nanorod arrays for LEDs. This work highlights the potential utility of postsynthetic interconversion of hybrid perovskites for nanostructured optoelectronic devices such as LEDs, which enables new strategies for the application of hybrid perovskites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Solution-Phase Synthesis of Cesium Lead Halide Perovskite Nanowires

Halide perovskites have attracted much attention over the past 5 years as a promising class of materials for optoelectronic applications. However, compared to hybrid organic-inorganic perovskites, the study of their pure inorganic counterparts, like cesium lead halides (CsPbX 3 ), lags far behind. Here, a catalyst-free, solution-phase synthesis of CsPbX 3 nanowires (NWs) is reported. These NWs are single-crystalline, with uniform growth direction, and crystallize in the orthorhombic phase. Both CsPbBr 3 and CsPbI 3 are photoluminescence active, with composition-dependent temperature and self-trapping behavior. These NWs with a well-defined morphology could serve as an ideal platform for the investigation of fundamental properties and the development of future applications in nanoscale optoelectronic devices based on all-inorganic perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Core–Shell CdS–Cu 2 S Nanorod Array Solar Cells

As an earth-abundant p-type semiconductor, copper sulfide (Cu 2 S) is an attractive material for application in photovoltaic devices. However, it suffers from a minority carrier diffusion length that is less than the length required for complete light absorption. Core–shell nanowires and nanorods have the potential to alleviate this difficulty because they decouple the length scales of light absorption and charge collection. To achieve this geometry using Cu 2 S, cation exchange was applied to an array of CdS nanorods to produce well-defined CdS–Cu 2 S core–shell nanorods. Previous work has demonstrated single-nanowire photovoltaic devices from this material system, but in this work, the cation exchange chemistry has been applied to nanorod arrays to produce ensemble-level devices with microscale sizes. The core–shell nanorod array devices show power conversion efficiencies of up to 3.8%. In addition, these devices are stable when measured in air after nearly one month of storage in a desiccator. Furthermore, these results are a first step in the development of large-area nanostructured Cu 2 S-based photovoltaics that can be processed from solution.

14 SOLAR ENERGY↗

Solution Phase Synthesis of Indium Gallium Phosphide Alloy Nanowires

The tunable physical and electronic structure of III–V semiconductor alloys renders them uniquely useful for a variety of applications, including biological imaging, transistors, and solar energy conversion. However, their fabrication typically requires complex gas phase instrumentation or growth from high-temperature melts, which consequently limits their prospects for widespread implementation. Furthermore, the need for lattice matched growth substrates in many cases confines the composition of the materials to a narrow range that can be epitaxially grown. In this work, we present a solution phase synthesis for indium gallium phosphide (In x Ga 1–x P) alloy nanowires, whose indium/gallium ratio, and consequently, physical and electronic structure, can be tuned across the entire x = 0 to x = 1 composition range. We demonstrate the evolution of structural and optical properties of the nanowires, notably the direct to indirect band gap transition, as the composition is varied from InP to GaP. Our scalable, low-temperature synthesis affords compositional, structural, and electronic tunability and can provide a route for realization of broader In x Ga 1–x P applications.

36 MATERIALS SCIENCE↗