Search NASA⌕ Search

Engineering topics

Yuan, Joshua S.

Publications and source records attributed to Yuan, Joshua S..

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A Multi-Streamline Approach for Upcycling PET into a Biodiesel and Asphalt Modifier

The non-degradable nature of petroleum-based plastics and the dependence on petroleum-based products in daily life and production are dilemmas of human development today. We hereby developed a plastic waste upcycling process to address these challenges. A multi-stream fraction strategy was developed to process poly (ethylene terephthalate) (PET) plastics into soluble and insoluble fractions. The soluble fraction was used as a sole carbon source for microbial fermentation to produce biodiesel precursor lipids with an appreciable bioconversion yield. The insoluble fraction containing fractionated polymers was used as the asphalt binder modifiers. The downsized PET additive improved the high-temperature performance of the asphalt binder by 1 performance grade (PG) without decreasing the low-temperature PG. Subsequent SEM imaging unveiled alterations in the micromorphology induced by PET incorporation. Further FTIR and 1 H NMR analysis highlighted the aromatic groups of PET polymers as a crucial factor influencing performance enhancement. The results demonstrated the multi-stream fraction as a promising approach for repurposing plastic waste to produce biodiesel and modify asphalt. Finally, this approach holds the potential to tackle challenges in fuel supply and enhance infrastructure resilience to global warming.

09 BIOMASS FUELS↗
DOE OSTI2023

Lytic polysaccharide monooxygenase synergized with lignin-degrading enzymes for efficient lignin degradation

Even though the discovery of lytic polysaccharide monooxygenases (LPMOs) has fundamentally shifted our understanding of biomass degradation, most of the current studies focused on their roles in carbohydrate oxidation. However, no study demonstrated if LPMO could directly participate to the process of lignin degradation in lignin-degrading microbes. This study showed that LPMO could synergize with lignin-degrading enzymes for efficient lignin degradation in white-rot fungi. The transcriptomics analysis of fungi Irpex lacteus and Dichomitus squalens during their lignocellulosic biomass degradation processes surprisingly highlighted that LPMOs co-regulated with lignin-degrading enzymes, indicating their more versatile roles in the redox network. Biochemical analysis further confirmed that the purified LPMO from I. lacteus CD2 could use diverse electron donors to produce H 2 O 2 , drive Fenton reaction, and synergize with manganese peroxidase for lignin oxidation. The results thus indicated that LPMO might uniquely leverage the redox network toward dynamic and efficient degradation of different cell wall components.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Bioconversion of Agave Bagasse Lignin to Medium-Chain-Length Polyhydroxyalkanoates by Pseudomonas putida

Inadequate disposal of Agave tequilana bagasse (ATB) brings environmental and economic issues to tequila producing regions. Recent works have proposed technologies for valorization of the polysaccharide’s fractions of ATB. However, lignin bioconversion has not been investigated due to its recalcitrant nature. In this work, a systematic pretreatment is proposed to release the lignocellulosic fractions and produce medium-chain-length polyhydroxyalkanoates (PHA) from the lignin fraction of ATB. Nuclear magnetic resonance (NMR) analyses revealed that ATB lignin contained 63% of β-O-4 interunit linkages, making this lignin more suitable for pretreatment and biodegradation compared to other lignins. Exploratory experiments revealed that two-stage fermentation is suitable for PHA production from ATB lignin using wild type and engineered Pseudomonas putida strains. PHA increased from 0.09 to 0.39 g/L compared to single batch fermentation. Further improvement to 0.76 g/L was possible by using a central composite design to optimize the inoculum, substrate, and nitrogen concentrations. Finally, PHA depolymerase gene phaZ was knocked out from P. putida and tested at optimal conditions, enabling a PHA titer of 0.97 g/L. Analyses by NMR and GC-MS confirmed lignin derivatives consumption and decrease of β-O-4 linkages. This study lays the foundations to enable agave lignin bioprocessing and opens new avenues for ATB biorefineries.

PHA↗
DOE OSTI2022

Feedstock design for quality biomaterials

Feedstock design is crucial for lignocellulosic biomass use. Current strategies for feedstock design cannot be readily applied to improve the quality of biomass-based materials, limiting the sustainability and economics of lignocellulosic biorefineries. Recent studies have advanced the understanding of biomass structure–property relationships and discovered several characteristics, such as molecular weight, uniformity, linkage profile, and functional groups, that are critical for manufacturing diverse quality biomaterials. Further, these discoveries call for fundamentally different strategies for feedstock development. Such strategies need to rediscover the roles of monolignol biosynthesis enzymes and leverage lignin polymerization enzymes to achieve precise control of lignin molecular structure. These innovations could transform biomass into feedstock for high-quality biomaterials, addressing essential environmental challenges and empowering the bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2022

A Unique Bacterial Pelletized Cultivation Platform in Rhodococcus opacus PD630 Enhanced Lipid Productivity and Simplified Harvest for Lignin Bioconversion

Pelletized liquid cultivation has been widely explored because of its advantages in biomanufacturing, such as easier biomass harvesting, higher product yield, and lower medium viscosity and energy consumption. In this study, we discovered that the nonfilamentous bacterium Rhodococcus opacus PD630 could form pellets during the fermentation of alkaline pretreatment liquor containing lignin as a carbon source. This discovery advanced our understanding of bacterium pelletization, as only filamentous fungi and filamentous bacteria were reported to form pellets without the addition of external agents such as flocculants or polymers in previous research. Several factors were investigated to understand how they affect the process of pelletization. Notably, the lipid content in the pellets was much higher than in the scattered bacteria at low nitrogen concentration (<0.5 g/L), under which condition (high carbon to nitrogen ratio) the industrial microbial production for lipids was carried out. Moreover, the highest pellet percentage (~60% of the total biomass) was observed at 30 g/L soluble solid content, an agitation rate of 180 rpm, 1.4 g/L NH 4 NO 3 , an initial optical density (OD 600 ) of 10, and a centrifugation speed of 6000 rpm. Further, the study also opens new avenues to decrease harvesting and cultivation cost as well as energy consumption for microbial fermentation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced medium chain length-polyhydroxyalkanoate production by co-fermentation of lignin and holocellulose hydrolysates

Biological lignin conversion to medium chain length-polyhydroxyalkanoates (mcl-PHA) has recently emerged as an attractive alternative to petroleum-based plastics due to the renewable nature of lignin and the value-added applications of mcl-PHA. Previous reports suggested that addition of limited glucose can improve mcl-PHA accumulation in Pseudomonas putida KT2440 grown in lignin substrates. Herein, we propose a biorefinery process to systematically release lignin and sugars from lignocellulosic biomass and evaluate the potential of co-utilization of all biomass components for conversion to mcl-PHA. Our results indicate that a sequential treatment composed of acid pretreatment, enzymatic hydrolysis and alkaline treatment produces a suitable lignin stream for mcl-PHA production in engineered P. putida. In addition, the PHA titer could be increased by 71% when the lignin stream (AH) was combined with the enzymatic hydrolysate (EH) at a ratio of 75 : 25. Higher ratios of EH : AH negatively affect mcl-PHA accumulation as well as mixtures with sugars from the acid hydrolysate. The optimization of the fermentation conditions, including the inoculum (OD 600 ) and substrate (soluble solid content (SSC)), was carried out by a central composite design. The optimal conditions were achieved at OD 600 = 2.17 and SSC = 68.28 g L –1 . Under these conditions, the titer increased 4.3 fold, achieving a mcl-PHA production of 1.38 g L –1 . Lignin characterization before and after fermentation by nuclear magnetic resonance and gas chromatography showed that p-coumarates were mainly consumed during the fermentation for mcl-PHA production. Overall, this biorefinery strategy allowed us to increase mcl-PHA production by utilizing the different lignocellulosic fractions. Unlike previous studies, no model substrates were utilized at any stage of the fermentation process, representing a step forward towards process feasibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Guanidine-Degrading Enzyme Controls Genomic Stability of Ethylene-Producing Cyanobacteria

Recent studies have revealed the prevalence and biological significance of guanidine metabolism in nature. However, the metabolic pathways used by microbes to degrade guanidine or mitigate its toxicity have not been widely studied. Here, via comparative proteomics and subsequent experimental validation, we demonstrate that Sll1077, previously annotated as an agmatinase enzyme in the model cyanobacterium Synechocystis sp. PCC 6803, is more likely a guanidinase as it can break down guanidine rather than agmatine into urea and ammonium. The model cyanobacterium Synechococcus elongatus PCC 7942 strain engineered to express the bacterial ethylene-forming enzyme (EFE) exhibits unstable ethylene production due to toxicity and genomic instability induced by accumulation of the EFE-byproduct guanidine. Co-expression of EFE and Sll1077 significantly enhances genomic stability and enables the resulting strain to achieve sustained high-level ethylene production. These findings expand our knowledge of natural guanidine degradation pathways and demonstrate their biotechnological application to support ethylene bioproduction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Phototunable Lignin Plastics to Enable Recyclability

The accumulation of non-degradable petrochemical plastics imposes a significant threat to the environment and ecosystems. We addressed this challenge by designing a new type of phototunable plastics based on the unique lignin chemistry to enable readily end-life recycling. The advanced material design leveraged the efficient photocatalytic lignin depolymerization by ZnO nanoparticles to build lignin-polymethyl methacrylate (PMMA)-ZnO blends. We first demonstrated the highly effective phototunable lignin depolymerization in the complex polymer blend matrix and explored the molecular mechanisms. The technical barriers of mechanical property and recycling processing were then addressed by a new blend design with lignin core grafted with PMMA polymer. The new process has resulted in a new type of PMMA-g-lignin blend, which significantly improved the mechanical properties, making it comparable to PMMA alone. More importantly, the mechanical properties of the UV-treated blend decreased drastically in the new design, whereas the properties did not reduce in the non-grafted blends upon UV exposure. The results highlighted that the new blend design based on graftization maximized the impact of lignin depolymerization on blend structure and recyclability. Based on the results, we developed a process integrating UV and alkaline treatments to recycle PMMA for plastics and fractionated lignin for bioconversion or other applications in the new phototunable plastics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Transforming biorefinery designs with ‘Plug-In Processes of Lignin’ to enable economic waste valorization

Biological lignin valorization has emerged as a major solution for sustainable and cost-effective biorefineries. However, current biorefineries yield lignin with inadequate fractionation for bioconversion, yet substantial changes of these biorefinery designs to focus on lignin could jeopardize carbohydrate efficiency and increase capital costs. We resolve the dilemma by designing ‘plug-in processes of lignin’ with the integration of leading pretreatment technologies. Substantial improvement of lignin bioconversion and synergistic enhancement of carbohydrate processing are achieved by solubilizing lignin via lowering molecular weight and increasing hydrophilic groups, addressing the dilemma of lignin- or carbohydrate-first scenarios. The plug-in processes of lignin could enable minimum polyhydroxyalkanoate selling price at as low as $6.18/kg. The results highlight the potential to achieve commercial production of polyhydroxyalkanoates as a co-product of cellulosic ethanol. Here, we show that the plug-in processes of lignin could transform biorefinery design toward sustainability by promoting carbon efficiency and optimizing the total capital cost.

09 BIOMASS FUELS↗
DOE OSTI2021

Enhancing the multi-functional properties of renewable lignin carbon fibers via defining the structure–property relationship using different biomass feedstocks

Lignin has been explored extensively as a renewable precursor for carbon materials, considering its abundance as a major component of plant cell walls and its sustainability as a byproduct of both lignocellulosic biorefinery and the paper-making industry. Despite the extensive efforts to define the process–property relationship, it remains largely unknown how lignin biosynthesis and its chemistry would impact the resultant carbon fiber properties, for both mechanical and electroconductive performances. Such inadequate understanding fundamentally limits feedstock design and selection to improve carbon fiber properties toward broader commercial applications. Using lignin from a broad range of biomass feedstocks for carbon fiber manufacturing, we have fundamentally explored the structure–function relationship between lignin chemistry and carbon fiber performance. Specifically, lignin extracted from hardwood (sugar maple), softwood (loblolly pine and red cedar), and herbaceous plants (corn stover and switchgrass) was used for carbon fiber manufacturing, considering the very different lignin structures from these feedstocks. Linear regression models were established to define the relationship between carbon fiber mechanical properties and lignin structural characteristics. The results highlighted that the content of β-O-4 linkages correlates significantly with the tensile strength and elastic modulus of lignin carbon fibers, indicating that more linear β-O-4 linkages would promote the carbon fiber mechanical performance. Moreover, electroconductive properties are essential for broader energy device application of lignin-based carbon fibers, yet the mechanisms controlling their electroconductivity are largely unknown. Furthermore, we hereby demonstrated that a higher β-O-4 content also promotes the electroconductivity of lignin carbon fibers. Microstructure analysis further revealed that the crystallite size and content of the pre-graphitic turbostratic carbon structure in lignin-based carbon fibers were enhanced as the β-O-4 linkages increased. The content of β-O-4 linkages has shown a strong correlation with the crystallite content in a linear regression model. This study thus revealed the underlying mechanisms regarding how the lignin structure in planta defines the resultant carbon fiber properties. Moreover, the study also highlighted the correlation between the mechanical and electroconductive properties of lignin-based carbon fibers, both of which were defined by the lignin structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synergistic Improvement of Carbohydrate and Lignin Processability by Biomimicking Biomass Processing

The sustainability and economic feasibility of modern biorefinery depend on the efficient processing of both carbohydrate and lignin fractions for value-added products. By mimicking the biomass degradation process in white-rote fungi, a tailored two-step fractionation process was developed to maximize the sugar release from switchgrass biomass and to optimize the lignin processability for bioconversion. Biomimicking biomass processing using Formic Acid: Fenton: Organosolv (F 2 O) and achieved high processability for both carbohydrate and lignin. Specifically, switchgrass pretreated by the F 2 O process had 99.6% of the theoretical yield for glucose release. The fractionated lignin was also readily processable by fermentation via Rhodococcus opacus PD630 with a lipid yield of 1.16 g/L. Scanning electron microscope analysis confirmed the fragmentation of switchgrass fiber and the cell wall deconstruction by the F 2 O process. 2D-HSQC NMR further revealed the cleavage of aryl ether linkages (β-O-4) in lignin components. These results revealed the mechanisms for efficient sugar release and lignin bioconversion. The F 2 O process demonstrated effective mimicking of natural biomass utilization system and paved a new path for improving the lignin and carbohydrate processability in next generation lignocellulosic biorefinery.

09 BIOMASS FUELS↗
DOE OSTI2020

Emerging Strategies for Modifying Lignin Chemistry to Enhance Biological Lignin Valorization

Biological lignin valorization represents a promising approach contributing to sustainable and economic biorefineries. Here, the low level of valuable lignin–derived products remains a major challenge hindering the implementation of microbial lignin conversion. Lignin's properties play a significant role in determining the efficiency of lignin bioconversion. To date, despite significant progress in the development of biomass pretreatment, lignin fractionation, and fermentation over the last few decades, little efforts have gone into identifying the ideal lignin substrates for an efficient microbial metabolism. In this Minireview, emerging and state–of–the–art strategies for biomass pretreatment and lignin fractionation are summarized to elaborate their roles in modifying lignin structure for bioconversion. Fermentation strategies aimed at enhancing lignin depolymerization for microbial utilization are systematically reviewed as well. With an improved understanding of the ideal lignin structure elucidated by comprehensive metabolic pathways and/or big data analysis, modifying lignin chemistry could be more directional and effective. Ultimately, together with the progress of fermentation process optimization, biological lignin valorization will become more competitive in biorefineries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗