Engineering topics

Yuan, Suyue

Publications and source records attributed to Yuan, Suyue.

11 records

DOE OSTI2024

Harnessing graph convolutional neural networks for identification of glassy states in metallic glasses

Graph Convolutional Neural Networks (GCNNs) have emerged as powerful tools for analyzing materials. In this study, we employ GCNNs to examine structural characteristics of CuZr metallic glasses (MGs) and identify their states. We use molecular dynamics to simulate the quenching process of CuZr, using cooling rates ranging from 10 9 to 10 15 K/s, to produce six unique glassy states. For each state, we create a dataset comprising 1,800 distinct samples. We evaluate the effectiveness of various GCNNs, including Graph Attention Neural Network (GANN), Graph Sample and AggreGatE (GraphSAGE), Graph Isomorphism Network (GIN), and Relational Graph Convolutional Neural Network (RGCN). GANN and GraphSAGE demonstrate comparable performance, achieving an overall accuracy of 81% in classifying the MG states. Furthermore, these results underscore the potential of GCNNs to detect subtle structural variances in disordered materials and point to broader application of deep learning in the analysis of MGs and other amorphous substances.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Structural and thermodynamic characterization of CuZr metallic glass nanoparticles: Insights from atomistic simulations

Metallic crystalline nanoparticles (NPs) have been shown to display intriguing size-dependent properties. However, the properties of metallic glass (MG) NPs remain largely unexplored. Here, using molecular dynamics simulations, we produce Cu 64 Zr 36 MG NPs ranging in size from 1 to 20 nm by cooling molten systems at a relatively slow rate of 10 9 K/s. Results indicate that NPs are coated with a Cu-rich layer with a thickness that increases with NP size. We employ various simulated rates of heating, from 10 11 to 10 13 K/s, to determine the melting points of these NPs. The results show a significant decrease in the solidus temperature for NPs smaller than 10 nm. Furthermore, as NP size decreases, the fraction of Cu full icosahedra within the NPs increases, suggesting that smaller NPs are stronger and harder. These findings provide insights for designing heterogeneous metallic nanoglass materials that leverage the size-dependent properties of MG NPs.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Effect of heat treatment paths on the aging and rejuvenation of metallic glasses

Here, this study explores the influence of heat treatment paths on the structural relaxation of metallic glasses (MGs) in the regime of fast dynamics. We create MG samples using various quenching rates, from 10 9 to 10 11 K/s, and expose these samples to near-T g heat treatments with assorted combinations of heating/cooling rates, from 5×10 10 to 5×10 12 K/s, and annealing durations, from 10 ps to 10 ns. Results show that the effect of the heating rate is intricately tied to the initial structure of the MG, while a decrease in the cooling rate invariably intensifies the aging process. Extending the annealing duration may induce either aging or rejuvenation, subject to the specific thermal history. To interpret these findings, we hypothesize that the memory effect, governed by the activation and annihilation of reversible and irreversible flow units, underpins the rejuvenation-aging competition in MGs. Moreover, we suggest viewing the cooling stage as an annealing phase controlled by gradient temperature and fine-tuning its rate to achieve the targeted active flow unit distributions. This study illuminates the role of fast dynamics during the glass relaxation process and offers practical strategies for tailoring heat treatments to optimize MG structures and mechanical performance.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Uncovering metallic glasses hidden vacancy-like motifs using machine learning

Vacancies are a ubiquitous type of defect in crystalline materials that can affect their properties and behavior, including atomic diffusivity, deformation processes, thermal conductivity, and electrical conductivity. While well-defined in crystals, it is challenging to identify such topological footprints in the amorphous structure of metallic glasses (MGs). Here, we uncover an unforeseen vacancy-like structural motif named Q7, which refers to an atomic Voronoi polyhedron with seven quadrangular faces, by investigating MG local atomic configurations with the help of machine learning. The Q7 motif exhibits characteristics similar to crystalline vacancies and plays a significant role in short-range structural disorder in MGs. The atoms at the center of the Q7 motif display larger local entropy, atomic volume, and local tension. Additionally, its concentration follows an Arrhenius-like relationship with temperature, accurately indicating the glass transition temperature, and is strongly correlated with the yield and failure of MGs during mechanical deformation. The discovery of the Q7 motif provides new insights into understanding the intricate relationship between local disorder and structural relaxation in MGs, offering a remarkable ability to predict their thermal and mechanical behavior. This potentially paves the way for enhancements in the design and manufacturing processes of MGs and other amorphous materials.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Atomistic simulations of nanoindentation on nanoglasses: Effects of grain size and gradient microstructure on the mechanical properties

The use of nanoglass (NG) microstructures has been shown as an effective strategy to improve the ductility of rather brittle metallic glass alloys. To evaluate the effects of grain size and gradient design on the mechanical properties of NGs, we perform molecular dynamics simulations of nanoindentation on Cu 64 Zr 36 NGs. We consider samples with uniform 3 and 7 nm grain sizes as well as gradient microstructures with gradient grain sizes varying from 3 to 7 nm. Here, the results show that the deformation mechanism in NGs with small grain sizes is dominated by the activation and evolution of multiple shear transformation zones. Increasing grain sizes enhances the elastic modulus and hardness at the cost of reduced abrasion resistance. Though the average grain size at the indentation surface plays a crucial role in the deformation behavior of gradient NG models, their strain localization and plastic deformation states are affected by the grain sizes far from the indenter. Desired combinations of mechanical properties can be realized by different NG microstructure designs.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Mechanical properties, failure mechanisms, and scaling laws of bicontinuous nanoporous metallic glasses

Molecular dynamics simulations are employed to study the mechanical properties of nanoporous Cu x Zr 1-x metallic glasses (MGs) with five different compositions, x = 0.28, 0.36, 0.50, 0.64, and 0.72, and porosity in the range 0.1 < Φ < 0.7. Results from tensile loading simulations indicate a strong dependence of Young's modulus, E, and Ultimate Tensile Strength (UTS) on porosity and composition. By increasing the porosity from Φ = 0.1 to Φ = 0.7, the topology of the nanoporous MG shifts from closed cell to open-cell bicontinuous. The change in nanoporous topology enables a brittle-to-ductile transition in deformation and failure mechanisms from a single critical shear band to necking and rupture of ligaments. Genetic Programming (GP) is employed to find scaling laws for E and UTS as a function of porosity and composition. Here, a comparison of the GP-derived scaling laws against existing relationships shows that the GP method is able to uncover expressions that can predict accurately both the values of E and UTS in the whole range of porosity and compositions considered.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Excess free volume and structural properties of inert gas condensation synthesized nanoparticles based CuZr nanoglasses

Abstract Nanoglass (NG) as a new structure-tunable material has been investigated using both experiments and computational modeling. Experimentally, inert gas condensation (IGC) is commonly employed to prepare metallic glass (MG) nanoparticles that are consolidated using cold compression to generate an NG. In computational modeling, various methods have been used to generate NGs. However, due to the high computational cost involved, heretofore modeling investigations have not followed the experimental synthesis route. In this work, we use molecular dynamics simulations to generate an NG model by consolidating IGC-prepared Cu 64 Zr 36 nanoparticles following a workflow similar to that of experiments. The resulting structure is compared with those of NGs produced following two alternative procedures previously used: direct generation employing Voronoi tessellation and consolidation of spherical nanoparticles carved from an MG sample. We focus on the characterization of the excess free volume and the Voronoi polyhedral statistics in order to identify and quantify contrasting features of the glass-glass interfaces in the three NG samples prepared using distinct methods. Results indicate that glass-glass interfaces in IGC-based NGs are thicker and display higher structural contrast with their parent MG structure. Nanoparticle-based methods display excess free volume exceeding 4%, in agreement with experiments. IGC-prepared nanoparticles, which display Cu segregation to their surfaces, generate the highest glass-glass interface excess free volume levels and the largest relative interface volume with excess free volume higher than 3%. Voronoi polyhedral analysis indicates a sharp drop in the full icosahedral motif fraction in the glass-glass interfaces in nanoparticle-based NG as compared to their parent MG.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Tuning the mechanical properties of nanoglass-metallic glass composites with brick and mortar designs

We use molecular dynamics simulations to characterize the tensile deformation and failure of metallic glass (MG)-nanoglass (NG) composites designed with a brick and mortar architecture consisting of a 3 nm-grain-size NG matrix and a MG second phase. Results show that the overall strength of the matrix is significantly improved by the second phase without sacrificing the large NG matrix ductility. The mechanical synergy of the two phases is optimized by arranging the MG bricks in a staggered way, which effectively delocalizes the plastic deformation, hindering the buildup of local stress hot spots and the generation of critical shear bands.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Bicontinuous nanoporous design induced homogenization of strain localization in metallic glasses

Bicontinuous nanoporous metallic glasses (MG) synergize the outstanding properties of MGs and open-cell nanoporous materials. The low-density and high-specific-surface-area of bicontinuous nanoporous structures have the potential to enhance the applicability of MGs in catalysis, sensors, and lightweight structural designs. In this work, we report molecular dynamics simulations of tensile loading deformation and failure of bicontinuous nanoporous Cu 64 Zr 36 MG with 55% porosity and 4.4 nm ligament size. Results indicate an anomalous mechanical behavior featuring delocalized plastic deformation preceding ductile failure. The deformation follows two mechanisms: i) Necking of ligaments aligned with the loading direction and ii) progressive alignment of randomly oriented ligaments. Failure occurs at 0.16 strain, following massive rupture of ligaments. This work indicates that a bicontinuous nanoporous design is able to effectively delocalize strain localization in a MG due to a combination of size effect on the ductility of MGs resulting in nano ligaments necking and progressive asynchronous alignment of ligaments.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Tuning the Mechanical Properties of Shape Memory Metallic Glass Composites with Brick and Mortar Designs

We use molecular dynamics simulations to characterize the tensile deformation and failure of shape memory alloy-bulk metallic glass composites (BMGCs). As the failure in BMGCs shifts from the MG matrix to the second phase different strategies are required to further improve their mechanical properties. Results show that a staggered brick BMGC displays enhanced ductility with mild strength loss following a homogeneously distributed plasticity. This demonstrates that judiciously designed BMGCs can effectively synergize the mechanical properties of metallic glasses and shape memory alloys by effectively distributing stress and preventing the generation of critical shear bands and premature failure while preserving strength.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Gradient microstructure induced shear band constraint, delocalization, and delayed failure in CuZr nanoglasses

The mechanical properties of metallic glasses (MGs) can be significantly tuned by introducing a nanoscale glass-glass interface microstructure. Here, we design three types of Cu 64 Zr 36 MG seamless gradient microstructures by combining glassy grain sizes from 3 to 15 nm. We perform tensile loading molecular dynamics simulations on the named gradient nanoglasses to characterize their mechanical behavior. In all cases, results indicate the generation of gradient plasticity following the gradient in grain size, i.e. local plasticity increases from large to small grain size regions. Loading parallel to the gradient direction results in initial broad necking followed by catastrophic failure. In contrast, loading perpendicular to the gradient direction results in diffused shear band propagation from large to small grain size regions, delaying the generation of a dominant shear band and further delocalizing plastic deformation. In conclusion, the results demonstrate the synergistic effects generated by heterogeneous gradient designs in the mechanical behavior of metallic glasses.

36 MATERIALS SCIENCE↗