Engineering topics
Yuan, Wei
Publications and source records attributed to Yuan, Wei.
Confinement-Induced Chiral Edge Channel Interaction in Quantum Anomalous Hall Insulators
In quantum anomalous Hall (QAH) insulators, the interior is insulating but electrons can travel with zero resistance along one-dimensional (1D) conducting paths known as chiral edge channels (CECs). These CECs have been predicted to be confined to the 1D edges and exponentially decay in the two-dimensional (2D) bulk. Here, in this Letter, we present the results of a systematic study of QAH devices fashioned in a Hall bar geometry of different widths under gate voltages. At the charge neutral point, the QAH effect persists in a Hall bar device with a width of only ~72 nm, implying the intrinsic decaying length of CECs is less than ~36 nm. In the electron-doped regime, we find that the Hall resistance deviates quickly from the quantized value when the sample width is less than 1 μm. Our theoretical calculations suggest that the wave function of CEC first decays exponentially and then shows a long tail due to disorder-induced bulk states. Therefore, the deviation from the quantized Hall resistance in narrow QAH samples originates from the interaction between two opposite CECs mediated by disorder-induced bulk states in QAH insulators, consistent with our experimental observations.
Controlling Antiferromagnetic Magnon Polarization by Interfacial Exchange Interaction
We demonstrate highly efficient control of antiferromagnetic (AFM) magnon spins by the interfacial exchange interaction in heterostructures of ferrimagnetic yttrium iron garnet (YIG) and AFM Cr 2 O 3 . At low temperatures, Cr 2 O 3 is antiferromagnetically ordered. The interfacial exchange interaction exerted by YIG lifts the degeneracy between the AFM magnon modes in Cr 2 O 3 , resulting in a net spin polarization and a spin current dominated by left-handed magnons, even at zero magnetic field, which is detected by the spin Seebeck effect with a 5-nm-thick Pt film. In the AFM magnon-dominated region, even if the magnetic field is not sufficiently strong to induce the spin-flop transition in Cr 2 O 3 , the total spin Seebeck signal polarity flips when the YIG magnetization switches. It clearly indicates that the Cr 2 O 3 magnon polarization is controlled by YIG magnetization through the interfacial exchange interaction. The demonstration of the efficient control of AFM magnon polarization opens a pathway to manipulate AFM magnon quantum states using FM-AFM heterostructures.
Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells
Reversible protonic ceramic electrochemical cells (R-PCECs) are ideally suited for efficient energy storage and conversion; however, one of the limiting factors to high performance is the poor stability and insufficient electrocatalytic activity for oxygen reduction and evolution of the air electrode exposed to the high concentration of steam. Here we report our findings in enhancing the electrochemical activity and durability of a perovskite-type air electrode, Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O 3-δ (BCFN), via a water-promoted surface restructuring process. Under properly-controlled operating conditions, the BCFN electrode is naturally restructured to an Nb-rich BCFN electrode covered with Nb-deficient BCFN nanoparticles. When used as the air electrode for a fuel-electrode-supported R-PCEC, good performances are demonstrated at 650 °C, achieving a peak power density of 1.70 W cm –2 in the fuel cell mode and a current density of 2.8 A cm –2 at 1.3 V in the electrolysis mode while maintaining reasonable Faradaic efficiencies and promising durability.
A high-performance and durable direct NH 3 tubular protonic ceramic fuel cell integrated with an internal catalyst layer
Nickel-based cermet anode-supported protonic ceramic fuel cells (PCFCs) show great potential for direct utilization of ammonia. However, the insufficient activity of anode and the deterioration of anode activity/durability caused by the undesired interaction between nickel and ammonia greatly limit the application. Here, we report tubular PCFCs embedded with a catalytic iron layer. Such cells show peak power densities of 1.507 W cm -2 and 1.078 W cm -2 at 700 °C when using H 2 and NH 3 as fuel, respectively, which are the highest tubular PCFC performance so far ever reported. In addition, the stability of cells with the catalyst layer has been dramatically enhanced when compared with that of cells without the catalyst layer. As a result, the enhancement of activity and durability is attributed to the catalytic activity of iron for ammonia decomposition, through which the direct contact between nickel and ammonia has been minimized and the anode structure has therefore been protected.
First- and second-order magnetic anisotropy and damping of europium iron garnet under high strain
Understanding and tailoring static and dynamic properties of magnetic insulator thin films is important for spintronic device applications. Here, we grow atomically flat epitaxial europium iron garnet (EuIG) thin films by pulsed laser deposition on (111)-oriented garnet substrates with a range of lattice parameters. By controlling the lattice mismatch between EuIG and the substrates, we tune the strain in EuIG films from the compressive to the tensile regime, which is characterized by x-ray diffraction. Using ferromagnetic resonance (FMR), we find that, in addition to the first-order perpendicular magnetic anisotropy which depends linearly on the strain, there is a significant second-order one that has a quadratic strain dependence. Inhomogeneous linewidth of the FMR increases notably with increasing strain, while the Gilbert damping parameter remains nearly constant (≈ 2 × 10 –2 ). Finally, these results provide valuable insight into the spin dynamics in ferrimagnetic insulators and useful guidance for material synthesis and engineering of next-generation spintronics applications.
An improved oxygen reduction reaction activity and CO 2 -tolerance of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ achieved by a surface modification with barium cobaltite coatings
Solid oxide fuel cells (SOFCs) cathode often suffers from the poisoning effect of the contaminants commonly encountered in air such as CO 2 . Here we report an effective approach to enhancing the activity and CO 2 tolerance of the state-of-the-art La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) cathode enabled by a coating of BaCoO 3-δ (BCO), as verified by the electrochemical testings, Raman analyses, and density functional theory calculations. When surface modified with a thin-film BCO coating, LSCF displays a much enhanced ORR activity and an improved durability against CO 2 . For example, anode supported SOFCs with the LSCF cathode coated with BCO coatings show a remarkable peak power density (Pmax) of 0.41 Wcm -2 and a significantly reduced degradation rate in current density of ~0.08% h -1 at 0.8 V and 700 °C for a period of 300 hs when humidified H2 (with 3 vol%H2O) was used as fuel and air with 8 vol% CO 2 as oxidant. The demonstrated performance is improved when compared with those of the cells with a blank LSCF electrode (a Pmax of ~0.36 Wcm -2 and a degradation rate of ~0.15% h -1 ) under the same conditions. Furthermore, the adsorption energy calculations suggests that BCO coating makes CO 2 adsorption much weaker than LSCF (-0.54 eV versus -1.07 eV).
Observation of Magnon Polarons in a Uniaxial Antiferromagnetic Insulator
Magnon polarons, a type of hybridized excitations between magnons and phonons, were first reported in yttrium iron garnet as anomalies in the spin Seebeck effect responses. Here, we report an observation of antiferromagnetic (AFM) magnon polarons in a uniaxial AFM insulator Cr 2 O 3 . Despite the relatively higher energy of magnon than that of the acoustic phonons, near the spin-flop transition of ~ 6 T , the left-handed magnon spectrum shifts downward to hybridize with the acoustic phonons to form AFM magnon polarons, which can also be probed by the spin Seebeck effect. The spin Seebeck signal is founded to be enhanced due to the magnon polarons at low temperatures.
Spin current generation and detection in uniaxial antiferromagnetic insulators
Spin current represents a flow of spin angular momentum and does not require movement of charges. Magnetic insulators can therefore work as a source as well as a medium of spin currents, which has been established in ferrimagnetic insulators. Here, we report recent progress in the generation and electrical detection of spin currents in uniaxial antiferromagnetic insulators carried by antiferromagnetic magnons, both thermally and resonantly excited, respectively, via the spin Seebeck effect and antiferromagnetic spin pumping by subterahertz microwaves. These findings open up many exciting possibilities of potential antiferromagnetic applications.
Spin Seebeck effect near the antiferromagnetic spin-flop transition
In this work, we develop a low-temperature, long-wavelength theory for the interfacial spin Seebeck effect (SSE) in easy-axis antiferromagnets. The field-induced spin-flop (SF) transition of Néel order is associated with a qualitative change in SSE behavior: Below SF, there are two spin carriers with opposite magnetic moments, with the carriers polarized along the field forming a majority magnon band. Above SF, the low-energy, ferromagneticlike mode has magnetic moment opposite the field. This results in a sign change of the SSE across SF, which agrees with recent measurements on Cr 2 O 3 /Pt and Cr 2 O 3 /Ta devices. In our theory, SSE is due to a Néel spin current below SF and a magnetic spin current above SF. Using the ratio of the associated Néel to magnetic spin-mixing conductances as a single constant fitting parameter, we reproduce the field dependence of the experimental data and partially the temperature dependence of the relative SSE jump across SF.
Enhanced Cr-tolerance of an SOFC cathode by an efficient electro-catalyst coating
Not Available
Spin current from sub-terahertz-generated antiferromagnetic magnons
Not provided.
Comparison between the Temperature Measurements by TIMED/SABER and Lidar in the Mid-Latitude
Comparisons of monthly-mean nighttime temperature profiles observed by the Sodium Lidar at Colorado State University and TIMED/SABER over passes are made. In the altitude range from 85 km to about 100 km, the two observations are in excellent agreement. Though within each other s error bars, important differences occur below 85 km in the entire year and above 100 km in the summer season. Possible reasons for these difference are high photon noise below 85 km in lidar observations, and less than accurate assumptions in the concentration of important chemical species like oxygen (and its quenching rate) in the SABER retrieval above 100 km. However, the two techniques both show the two-level mesopause thermal structure, with the times of change from one level to the other in excellent agreement. Comparison indicates that the high-level (winter) mesopause altitudes are also in excellent agreement between the two observations, though some difference may exist in the low-level (summer) mesopause altitudes between ground-based and satellite-borne data.