Search NASA⌕ Search

Engineering topics

Yuan, Yong

Publications and source records attributed to Yuan, Yong.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Mitigating Hydrogen-Induced Degradation of Iridium Anodes in Proton Exchange Membrane Water Electrolyzers

One promising method for reducing precious metal usage in proton exchange membrane water electrolysis is lowering iridium (Ir) loading at the anode. However, low-loading Ir catalysts often suffer from poor stability under high current densities. In this study, hydrogen (H2) crossover from the cathode to the anode is identified as a key degradation pathway. Temperature-programmed reduction confirms the reduction of IrO2 at 80 °C in a hydrogen environment, highlighting the vulnerability of IrO2-based catalysts to H2 exposure. To mitigate this effect, palladium (Pd) is introduced as an anode additive, acting as an H2 oxidation catalyst and mitigating IrO2 reduction. This protective role is verified by inductively coupled plasma optical emission spectroscopy and in situ X-ray absorption spectroscopy, showing significantly suppressed Ir dissolution at 80 °C under H2 flow when an O-covered Pd surface is present at oxygen evolution reaction potentials. Results from the current study identify a new strategy in improving activity and durability of catalysts in electrolyzers.

58 GEOSCIENCES↗
DOE OSTI2024

Influence of support on Rh-Co bimetallic catalysts for ethylene hydroformylation

Bimetallic Rh- and Co-based catalysts are promising materials for the heterogenous ethylene hydroformylation reaction. Here, in this study, the influence of a mesoporous silica (SBA-15) support on Rh and Co bimetallic interactions was investigated through a comparison with silica gel and alumina supports. The bimetallic catalyst supported on mesoporous silica (RhCo 3 /SBA-15) showed the best C 3 oxygenate yield among the three bimetallic catalysts. In-situ vibrational studies suggested moderate binding of the gem-dicarbonyl and Rh(CO)(C 2 H 4 ) intermediates due to this bimetallic interaction that led to improved hydroformylation performance. Kinetic studies revealed a lower hydroformylation barrier for the bimetallic compared to a Rh monometallic catalyst, and in-situ X-ray absorption spectroscopy investigations showed clear Rh-Co alloy formation on RhCo 3 /SBA-15. The bimetallic enhancement effect from the interaction with the mesoporous silica support shown here can be further optimized to design olefin hydroformylation catalysts.

58 GEOSCIENCES↗
DOE OSTI2024

Confining platinum clusters in indium-modified ZSM-5 zeolite to promote propane dehydrogenation

Designing highly active and stable catalytic sites is often challenging due to the complex synthesis procedure and the agglomeration of active sites during high-temperature reactions. Here, we report a facile two-step method to synthesize Pt clusters confined by In-modified ZSM-5 zeolite. In-situ characterization confirms that In is located at the extra-framework position of ZSM-5 as In + , and the Pt clusters are stabilized by the In-ZSM-5 zeolite. The resulting Pt clusters confined in In-ZSM-5 show excellent propane conversion, propylene selectivity, and catalytic stability, outperforming monometallic Pt, In, and bimetallic PtIn alloys. The incorporation of In + in ZSM-5 neutralizes Brønsted acid sites to inhibit side reactions, as well as tunes the electronic properties of Pt clusters to facilitate propane activation and propylene desorption. The strategy of combining precious metal clusters with metal cation-exchanged zeolites opens the avenue to develop stable heterogeneous catalysts for other reaction systems.

58 GEOSCIENCES↗
DOE OSTI2024

Experimental trends and theoretical descriptors for electrochemical reduction of carbon dioxide to formate over Sn-based bimetallic catalysts

The electrochemical carbon dioxide reduction reaction (CO 2 RR) using renewable energy sources is a promising solution for mitigating CO 2 emissions. In particular, CO 2 RR to formate represents a commercially profitable target. However, a comprehensive understanding of the catalytic mechanisms of Sn-based catalysts under reaction conditions, including the real-time structural evolution of catalysts and the role of all key reaction intermediates in influencing the CO 2 RR selectivity, is still lacking. The current study reports a framework to study the selectivity preference of Sn-based bimetallic catalysts using a combination of electrochemical measurements, in situ characterization, and density functional theory (DFT) calculations. The addition of a second metal (Co, Ni, Ag, Zn, Ga, Bi) was found to play a vital role in affecting the CO 2 RR performance. In situ X-ray absorption near edge structure (XANES) measurements revealed a dynamic evolution in the Sn valence state induced by different secondary metals. A multidimensional descriptor involving all the key reaction intermediates was developed to assess formate selectivity using a 2-dimensional volcano plot. Finally, this research offers an effective framework for understanding CO 2 RR catalytic selectivity by considering both the real-time structural evolution of catalysts and all the key intermediates involved.

58 GEOSCIENCES↗
DOE OSTI2024

Using ethanol and isopropanol as biomass model compounds for understanding bond scission mechanisms over Cu/Mo 2 N catalysts

The conversion of biomass compounds into fuels and chemicals is an important step towards a more sustainable future. This work combines results from model surfaces and powder catalysts to demonstrate Cu-modified mo- lybdenum nitride (Cu/Mo 2 N) as a selective catalyst for dehydrogenation of the biomass model compounds, ethanol and isopropanol. Results from model surfaces showed that while Mo2N led to unselective decomposition via both dehydrogenation and dehydration, the addition of Cu increased the dehydrogenation activity and selectivity. DFT calculations showed how Cu influenced the structures of active sites, adsorbate interactions, and thus the product selectivity. Batch reactor studies on corresponding powder catalysts confirmed the trend that Cu modification increased dehydrogenation activity, and in situ X-ray absorption spectroscopy elucidated the Cu oxidation state under reaction conditions. Further, this work demonstrates a strategy for promoting dehydrogenation over Mo 2 N-based catalysts, as well as the feasibility of using model surfaces to guide the design of industrially relevant catalysts.

09 BIOMASS FUELS↗
DOE OSTI2024

Oxide-Encapsulated Ruthenium Oxide Catalysts for Selective Oxygen Evolution in Unbuffered pH-Neutral Seawater

Direct seawater electrolysis is a promising approach to producing green hydrogen in water-scarce environments using renewable energy. However, the undesirable chlorine evolution reaction and hypochlorite evolution reaction compete with the desired oxygen evolution reaction (OER) at the anode electrocatalyst. This issue is most pronounced in unbuffered pH-neutral solutions due to local acidification resulting from the OER. To overcome this challenge, this study provides a comprehensive evaluation of the use of silicon oxide (SiO x ) and titanium oxide (TiO x ) nanoscale overlayers coated on metallic ruthenium (Ru) and ruthenium oxide (RuO x ) thin film electrodes and their ability to block chloride ions from reaching active sites during operation in an unbuffered 0.6 M NaCl electrolyte. Using a combination of (electro)analytical techniques, encapsulated RuO x anodes are shown to effectively suppress Cl - transport to buried catalyst active sites while allowing for the desired OER to occur, leading to increases in OER faradaic efficiency at moderate overpotentials. Evidence for the ability of SiO x overlayers to block Cl - ions from reaching the active buried interface was obtained by monitoring the ν(O-H) stretching mode of OH adsorbates using in situ Raman spectroscopy. Here, this study also reports trade-offs between the activity, selectivity, and stability of bare and encapsulated Ru and RuO x electrocatalysts, finding that the magnitude of these trade-offs strongly depends on the complex interplay between electrode architecture, material properties, and catalytic performance, especially in unbuffered pH-neutral seawater.

58 GEOSCIENCES↗
DOE OSTI2024

Converting Carbon Dioxide into Carbon Nanotubes by Reacting with Ethane

In this study, the urgency to mitigate environmental impacts from anthropogenic CO 2 emissions has propelled extensive research efforts on CO 2 reduction. The current work reports a novel approach involving transforming CO 2 and ethane into carbon nanotubes (CNTs) using earth-abundant metals (Fe, Co, Ni) at 750 °C. This route facilitates long-term carbon storage via generating high-value CNTs and produces valuable syngas with adjustable H 2 /CO ratios as byproducts. Without CO 2 , direct pyrolysis of ethane undergoes rapid deactivation. The participation of CO 2 not only enhances the durability of the catalyst, but also contributes about 30 % of the CNTs production, presenting a viable solution to CO 2 challenges. The CNT morphology depends on the catalyst used. Co- and Ni-based catalysts produce CNT with a 20 nm diameter and micrometer length, whereas Fe-based catalysts yield bamboo-like structures. This work represents a pioneering effort in utilizing CO 2 and ethane for CNT production with potential environmental and economic benefits.

09 BIOMASS FUELS↗
DOE OSTI2023

Comparison of direct and CO 2 -oxidative dehydrogenation of propane

Propane dehydrogenation to propylene has received increasing attention due to the fast growth in propylene demand and the exploration of shale gas containing propane. Direct dehydrogenation of propane (DDHP) offers high propylene selectivity but is limited by quick deactivation due to coke formation. CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP) can consume CO 2 and meanwhile reduce coke deposition via the reverse Boudouard reaction. Here in the current review, direct and CO 2 -assisted dehydrogenation of propane has been compared from three aspects: reaction mechanisms, catalyst compositions, and CO 2 footprint analysis. As the average CO 2 emissions from electricity generation decrease due to the utilization of renewable energy, CO 2 -ODHP potentially leads to a net-negative CO 2 footprint while DDHP cannot.

58 GEOSCIENCES↗
DOE OSTI2023

Zinc Speciation and Propane Dehydrogenation in Zn/H-ZSM-5 Catalysts

Zn/H-ZSM-5 catalysts have been frequently investigated for propane dehydrogenation (PDH); however, the active site remains unresolved due to the complexity of the system. We employed in situ FTIR spectroscopy and a kinetics method to correlate the Zn speciation and PDH activity in Zn/H-ZSM-5 with two Si/Al ratios (15 and 39) and a range of Zn/Al ratios (0–1.7). Incremental additions of zinc show that Zn 2+ sites are preferentially formed on H-ZSM-5 over a fraction of paired Al sites followed by [Zn-O-Zn] 2+ and [ZnOH] + sites and then ZnO x clusters. The [Zn-OH] + and [Zn-O-Zn] 2+ sites in H-ZSM-5 are more active and selective than isolated Zn 2+ for PDH. [Zn-OH] + species sublimate over time on stream, leading to catalyst deactivation, while [Zn-O-Zn] 2+ species are stable even after high-temperature reduction (750 °C for 60 min). Three distinct Zn sites ([Zn-O-Zn] 2+ , Zn 2+ , and [ZnOH] + ) show a similar propane reaction order (close to 1) and H 2 reaction order (close to 0). Combined with the lack of Zn hydride when propane flows over the catalyst at 550 °C, it is concluded that propane adsorption and dissociation is a rate-determining step and H 2 desorption is fast. This work indicates that the preparation of H-ZSM-5 with abundant Al pairs may be a strategy to form stable and selective Zn/H-ZSM-5 catalysts for propane dehydrogenation. Furthermore, it is also highlighted that examining the effect of both metal/Al ratios and Al distribution of the zeolite is crucial in identifying the metal cations in metal–zeolite systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Site Diversity and Mechanism of Metal–Exchanged Zeolite Catalyzed Non–Oxidative Propane Dehydrogenation

Metal-exchanged zeolites are well-known propane dehydrogenation (PDH) catalysts; however, the structure of the active species remains unresolved. In this review, existing PDH catalysts are first surveyed, and then the current understanding of metal-exchanged zeolite catalysts is described in detail. The case of Ga/H-ZSM-5 is employed to showcase that advances in the understanding of structure–activity relations are often accompanied by technological or conceptional breakthroughs. The understanding of Ga speciation at PDH conditions has evolved owing to the advent of in situ/operando characterizations and to the realization that the local coordination environment of Ga species afforded by the zeolite support has a decisive impact on the active site structure. In situ/operando quantitative characterization of catalysts, rigorous determination of intrinsic reaction rates, and predictive computational modeling are all significant in identifying the most active structure in these complex systems. The reaction mechanism could be both intricately related to and nearly independent of the details of the assumed active structure, as in the two main proposed PDH mechanisms on Ga/H-ZSM-5, that is, the carbenium mechanism and the alkyl mechanism. Perspectives on potential approaches to further elucidate the active structure of metal-exchanged zeolite catalysts and reaction mechanisms are discussed in the final section.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalytic Dehydrogenation of Ethane over Mn Oxide Supported on Zeolite Chabazite

A new class of Mn-containing zeolites prepared by incipient wetness impregnation (IWI) have been found to catalyze the ethane dehydrogenation reaction with high selectivity (98 %+). Preparation by IWI leads to the formation of Mn 2 O 3 nanoparticles on the external surface of the zeolite crystals and herein is shown that the primary active sites for the reaction are located on the surface of these particles. Propane dehydrogenation is also successfully catalyzed by this catalyst. Furthermore, other Mn-zeolites (MFI and BEA) also have high reactivity and selectivity towards light alkane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Uncertainties in Local Intense Precipitation Flood Modeling

In the Task 1 report for the U.S. Nuclear Regulatory Commission (NRC) funded Local Intense Precipitation (LIP) Probabilistic Flood Hazard Assessment (PFHA) Pilot Study, the Pacific Northwest National Laboratory (PNNL) reviewed hydrologic and hydraulic modeling approaches for estimation of LIP flooding and their implementation in readily available simulation software packages (Prasad and Yuan 2020). NRC’s interest is in developing guidance for performing LIP PFHA at nuclear power plant (NPP) sites. This report describes the work done under Task 2 of the study that focused on describing uncertainties associated with LIP flood modeling. Two main types of uncertainties exist in LIP flood modeling: (1) aleatory uncertainties that arise from the inherent natural variability of the hydrometeorological system and (2) epistemic uncertainties that arise from the analysts’ incomplete knowledge of the hydrometeorological and site configuration. Principal sources for aleatory variability in LIP flood simulations at NPP sites include precipitation (i.e., magnitude, duration, and temporal distribution of LIP events), initial conditions (e.g., soil moisture content, stormwater drainage discharge, surface storage), boundary conditions (e.g., upstream discharge, downstream water surface elevations), and long-term temporal trends (e.g., climate change). This report describes approaches used for estimating the aleatory variability in precipitation including precipitation-frequency analysis, numerical weather prediction, and stochastic weather generation. Data sources that can be used to estimate aleatory variability in initial and boundary conditions are also described. Approaches to include effects of long-term trends like those from climate change into estimation of aleatory variability are summarized. Sources of epistemic uncertainty in LIP flood simulations at NPP sites include process representation (e.g., multiple approaches to represent runoff generation, stormwater drainage, and hydraulic routing), site configurations (e.g., site layout, flow features, status of temporary flood protection, blockage of drains), model resolution, and long-term temporal trends (e.g., known/planned site alterations, land-use changes at and in the vicinity of the site). The report describes alternative process representations (methods and models), particularly those implemented in the LIP flood simulation software packages reviewed in Task 1 report, and lists the associated model parameters. Approaches for estimating model parameters when surface and subsurface water exchanges occur are also described.

42 ENGINEERING↗
DOE OSTI2022

Review of Software Packages for Local Intense Precipitation Flood Modeling

This report documents the review of the hydrologic and hydraulic modeling approaches used to estimate local intense precipitation (LIP) flooding and their implementation in readily available simulation software packages. The review focused on a few representative simulation software packages because of the similarity of their underlying mathematical bases and the rainfall-runoff and hydraulic processes included. Their availability for use in estimating LIP flood hazards and for U.S. Nuclear Regulatory Commission staff review of these estimates at the nuclear power plant (NPP) site scale were also considered.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Ga + -Chabazite Zeolite: A Highly Selective Catalyst for Nonoxidative Propane Dehydrogenation

Ga-chabazite zeolites (Ga-CHA) have been found to efficiently catalyze propane dehydrogenation with high propylene selectivity (96%). In situ FTIR spectroscopy and pulse titrations are employed to determine that upon reduction, surface Ga 2 O 3 is reduced and diffuses into the zeolite pores, displacing the Brønsted acid sites (BAS) and forming extra-framework Ga + sites. This isolated Ga + site reacts reversibly with H 2 to form GaHx (2034 cm -1 ) with an enthalpy of formation of ~ -51.2 kJ·mol -1 , a result supported by Density functional theory (DFT) calculations. The initial C 3 H 6 dehydrogenation rates decrease rapidly (40%) during the first 100 min and then decline slowly afterward, while the C 3 H 6 selectivity is stable at ~ 96%. The reduction in the reaction rate is correlated with the formation of polycyclic aromatics inside the zeolite (using UV-vis spectroscopy) indicating that the accumulation of polycyclic aromatics is the main cause of the deactivation. The carbon species formed can be easily oxidized at 600 °C with complete recovery of the PDH catalytic properties. The correlations between GaH x vs. Ga/Al ratio, and PDH rates vs. Ga/Al ratio show that extra-framework Ga + is the active center catalyzing propane dehydrogenation. The higher reaction rate on Ga + than In + in CHA zeolites, by a factor of 43, is the result of differences in the stabilization of the transition state due to the higher stability of Ga 3+ vs. In 3+ . The uniformity of the Ga + sites in this material makes it an excellent model for the molecular understanding of metal cation exchanged hydrocarbon interactions in zeolites.

10 SYNTHETIC FUELS↗