Search NASASearch

Engineering topics

Yuen, J. H.

Publications and source records attributed to Yuen, J. H..

At least 19 records

Modulation and coding technology for deep space and satellite applications

Modulation and coding research and development at the Jet Propulsion Laboratory (JPL) currently emphasize Deep Space Communications Systems and advanced near earth Commercial Satellite Communications Systems. The Deep Space Communication channel is extremely signal to noise ratio limited and has long transmission delay. The near earth satellite channel is bandwidth limited with fading and multipath. Recent code search efforts at JPL have found a long constraint, low rate convolutional code (15, 1/6) which, when concatenated with a ten bit Reed-Solomon (RS) code, provides a 2.1 dB gain over that of the Voyager spacecraft - the current standard. The new code is only 2 dB from the theoretical Shannon limit. A flight qualified version of the (15, 1/6) convolutional encoder was implemented on the Galileo Spacecraft to be launched later this year. An L-band mobile link, use of the Ka-band for personal communications, and the development of subsystem technology for the interconnection of satellite resources by using high rate optical inter-satellite links are noted.

Yuen, J. H.

Telecommunications technology development for the Deep Space Network

The telecommunications technology that is currently being developed for the Deep Space Network (DSN), a system providing communications and navigation support for NASA's deep space missions, is discussed. The major areas of development include Ka-band (32 GHz) technology, beam waveguide antennas, low-noise amplifiers, coding, navigation techniques, high-power transmitters, and optical technology. The expected payoffs of the new technology during the mid-1990's and later are examined.

Yuen, J. H.

The use of interleaving for reducing radio loss in convolutionally coded systems

The use of interleaving after convolutional coding and deinterleaving before Viterbi decoding is proposed. This effectively reduces radio loss at low-loop Signal to Noise Ratios (SNRs) by several decibels and at high-loop SNRs by a few tenths of a decibel. Performance of the coded system can further be enhanced if the modulation index is optimized for this system. This will correspond to a reduction of bit SNR at a certain bit error rate for the overall system. The introduction of interleaving/deinterleaving into communication systems designed for future deep space missions does not substantially complicate their hardware design or increase their system cost.

Divsalar, D.

Spacecraft telecommunications system mass estimates

Mass is the most important limiting parameter for present-day planetary spacecraft design, In fact, the entire design can be characterized by mass. The more efficient the design of the spacecraft, the less mass will be required. The communications system is an essential and integral part of planetary spacecraft. A study is presented of the mass attributable to the communications system for spacecraft designs used in recent missions in an attempt to help guide future design considerations and research and development efforts. The basic approach is to examine the spacecraft by subsystem and allocate a portion of each subsystem to telecommunications. Conceptually, this is to divide the spacecraft into two parts, telecommunications and nontelecommunications. In this way, it is clear what the mass attributable to the communications system is. The percentage of mass is calculated using the actual masses of the spacecraft parts, except in the case of CRAF. In that case, estimated masses are used since the spacecraft was not yet built. The results show that the portion of the spacecraft attributable to telecommunications is substantial. The mass fraction for Voyager, Galileo, and CRAF (Mariner Mark 2) is 34, 19, and 18 percent, respectively. The large reduction of telecommunications mass from Voyager to Galileo is mainly due to the use of a deployable antenna instead of the solid antenna on Voyager.

Yuen, J. H.

Image statistics decoding for convolutional codes

It is a fact that adjacent pixels in a Voyager image are very similar in grey level. This fact can be used in conjunction with the Maximum-Likelihood Convolutional Decoder (MCD) to decrease the error rate when decoding a picture from Voyager. Implementing this idea would require no changes in the Voyager spacecraft and could be used as a backup to the current system without too much expenditure, so the feasibility of it and the possible gains for Voyager were investigated. Simulations have shown that the gain could be as much as 2 dB at certain error rates, and experiments with real data inspired new ideas on ways to get the most information possible out of the received symbol stream.

Pitt, G. H., III

Systolic VLSI Reed-Solomon Decoder

Decoder for digital communications provides high-speed, pipelined ReedSolomon (RS) error-correction decoding of data streams. Principal new feature of proposed decoder is modification of Euclid greatest-common-divisor algorithm to avoid need for time-consuming computations of inverse of certain Galois-field quantities. Decoder architecture suitable for implementation on very-large-scale integrated (VLSI) chips with negative-channel metaloxide/silicon circuitry.

Shao, H. M.

In search of a 2-dB coding gain

A recent code search found a (15,1/5), a (14,1/6), and a (15,1/6) convolutional code which, when concatenated with a 10-bit (1023,959) Reed-Solomon (RS) code, achieves a bit-error rate (BER) of 0.000001 at a bit signal-to-noise ratio (SNR) of 0.50 dB, 0.47 dB and 0.42 B, respectively. All of these three codes outperform the Voyager communication system, our baseline, which achieves a BER of 10.000001 at bit SNR of 2.53 db, by more than 2 dB. The 2 dB coding improvement goal was exceeded.

Yuen, J. H.

Topology design and performance analysis of an integrated communication network

A research study on the topology design and performance analysis for the Space Station Information System (SSIS) network is conducted. It is begun with a survey of existing research efforts in network topology design. Then a new approach for topology design is presented. It uses an efficient algorithm to generate candidate network designs (consisting of subsets of the set of all network components) in increasing order of their total costs, and checks each design to see if it forms an acceptable network. This technique gives the true cost-optimal network, and is particularly useful when the network has many constraints and not too many components. The algorithm for generating subsets is described in detail, and various aspects of the overall design procedure are discussed. Two more efficient versions of this algorithm (applicable in specific situations) are also given. Next, two important aspects of network performance analysis: network reliability and message delays are discussed. A new model is introduced to study the reliability of a network with dependent failures. For message delays, a collection of formulas from existing research results is given to compute or estimate the delays of messages in a communication network without making the independence assumption. The design algorithm coded in PASCAL is included as an appendix.

Li, V. O. K.

A VLSI design of a pipeline Reed-Solomon decoder

A pipeline structure of a transform decoder similar to a systolic array was developed to decode Reed-Solomon (RS) codes. An important ingredient of this design is a modified Euclidean algorithm for computing the error locator polynomial. The computation of inverse field elements is completely avoided in this modification of Euclid's algorithm. The new decoder is regular and simple, and naturally suitable for VLSI implementation.

Shao, H. M.

Convolutionally-Coded Unbalanced QPSK Systems

Report discusses error-rate performance for three convolutionallycoded unbalanced quadriphase-shift-keying (UQPSK) communication systems with noisy carriers that introduce crosstalk. Systems analyzed unbalanced in sense that each transmits two data streams with different bit rates and (in some cases) different powers.

Divsalar, D.

A Strategy for Successful Deep Space Information Transmission in Bad Weather

To retrieve data during bad weather, most missions slow the data rate to accommodate a certain amount of attenuation, or to allow for all but a very small percentage of all-weather conditions. This system has two well-known and balancing disadvantages: no data is received reliably during very bad weather, and the data rate is slowed during good weather. A system of processing is described that encodes the most critical data more heavily, allowing it to be retrieved under bad conditions, while at the same time allowing most of the data to be sent at a higher data rate.

Swanson, L.

A Systolic VLSI Design of a Pipeline Reed-solomon Decoder

A pipeline structure of a transform decoder similar to a systolic array was developed to decode Reed-Solomon (RS) codes. An important ingredient of this design is a modified Euclidean algorithm for computing the error locator polynomial. The computation of inverse field elements is completely avoided in this modification of Euclid's algorithm. The new decoder is regular and simple, and naturally suitable for VLSI implementation.

Shao, H. M.

Deep space telecommunication systems engineering

Descriptive and analytical information useful for the optimal design, specification, and performance evaluation of deep space telecommunications systems is presented. Telemetry, tracking, and command systems, receiver design, spacecraft antennas, frequency selection, interference, and modulation techniques are addressed. Previously announced in STAR as N83-22226

Yuen, J. H.

Performance of concatenated Reed-Solomon/Viterbi channel coding

The concatenated Reed-Solomon (RS)/Viterbi coding system is reviewed. The performance of the system is analyzed and results are derived with a new simple approach. A functional model for the input RS symbol error probability is presented. Based on this new functional model, we compute the performance of a concatenated system in terms of RS word error probability, output RS symbol error probability, bit error probability due to decoding failure, and bit error probability due to decoding error. Finally we analyze the effects of the noisy carrier reference and the slow fading on the system performance.

Divsalar, D.

Carrier arraying with coupled phase-locked loops for tracking improvement

This paper considers a system that couples several phase-locked loops (PLL's) to improve carrier tracking performance. The system coherently combines the received carrier signals at geographically separated ground antennas to increase the total effective aperture. It automatically aligns the received carrier's phases to enhance received carrier signal-to-noise ratio. The tracking performance of this system is being assessed in terms of rms phase jitter.

Divsalar, D.

PPM demodulation for Reed-Solomon decoding for the optical space channel

The use of Reed-Solomon (RS) block codes over the pulse position modulated (PPM) frames to obtain the largest degree of error correction is considered. Since RS codes can correct both symbol errors and symbol erasures, a question arises as to the best way to demodulate the PPM laser fields in order to generate the input symbols for the RS decoder. The method selected for demodulating (converting the received laser field to digital symbols) defines the erasure and transmitted symbols of the laser link, and therefore determines the work error probabilities of the system. Several demodulating schemes are considered, and the effect of each on RS decoding performance computed. This computation was carried out for various optical receiver models. It is shown that simple threshold decisioning of pulse slots produces performance that degrades as the background noise increases. This is caused by the generation of too many erasures for the RS decoder to handle. A decision scheme, delta-max demodulation which offers improvement over threshold decisioning by redefining the generation of an erasure is proposed.

Divsalar, D.

A note on deep space optical communication link parameters

Topical communication in the context of a deep space communication link. Communication link analysis at the optical frequencies differs significantly from that at microwave frequencies such as the traditional S and X-bands used in deep space applications, due to the different technology of transmitter, antenna, modulators, and receivers. In addition, the important role of quantum noise in limiting system performance is quite different than that of thermal noise. The optical link design is put in a design control table format similar to a microwave telecom link design. Key considerations unique to the optical link are discussed.

Dolinar, S. J.

Deep Space Telecommunications Systems Engineering

Descriptive and analytical information useful for the optimal design, specification, and performance evaluation of deep space telecommunications systems is presented. Telemetry, tracking, and command systems, receiver design, spacecraft antennas, frequency selection, interference, and modulation techniques are addressed.

Yuen, J. H.