Search NASA⌕ Search

Engineering topics

Zapol, P

Publications and source records attributed to Zapol, P.

Computational screening of dopants for photocatalytic two-electron reduction of CO 2 on anatase (101) surfaces

We have carried out first-principles calculations to explore reaction mechanisms of the 2e reduction of CO 2 to HCOOH or CO in photochemical reactions catalyzed by anatase (101) surface. Two energetically competitive reaction pathways to HCOOH were identified, which involve initial 1e (via bidentate) and 2e (via monodentate) reduction steps, respectively. The pathways of producing CO were also explored. From the electronic structure analysis, we have shown the role of the anatase surface in facilitating electron and proton transfer in CO 2 reduction. Based on the determined rate-limiting step, we have carried out screening of substitutional surface cation doping and found metallic elements that could substantially lower the reaction barriers. Finally, a simple model describing the relationship between the activation barriers and the binding energies of CO 2 - to the dopant surface site is proposed.

Environmental Molecular Sciences Laboratory↗

Metallicity of InN and GaN surfaces exposed to NH{sub 3}.

A systematic study of energies and structures of InN and GaN (0001) surfaces exposed to NH{sub 3} and its decomposition products was performed with first-principles methods. A phenomenological model including electron counting contributions is developed based on calculated DFT energies and is used to identify low-energy structures. These predictions are checked with additional DFT calculations. The equilibrium phase diagrams are found to contain structures that violate the electron counting rule. Densities of states for these structures indicate n-type conductivity, consistent with available experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon nanotunnels form from single-walled carbon nanotubes interacting with a diamond (100)-(2 X 1) surface.

A quantum chemical study of the interaction of (5,5), (7,7), (9,9) and (8,0) single-walled carbon nanotubes with a clean (100)-(2 x 1) diamond surface is reported. Stable structures with covalent bonds at the interface were found for carbon nanotubes oriented parallel or perpendicular to the dimer rows on the reconstructed (100) surface. The binding energy of the most stable (5,5) nanotube-diamond structure is 1.7 eV/{angstrom}, and is attributed to strong covalent bonds formed between the carbon nanotube and the diamond surface. The structure of the nanotube is distorted by adsorption on the surface such that it adopts a tunnel-like geometry. Two other nanotunnel geometries were found for the (5,5) nanotube, with binding energies of 1.39 and 1.09 eV/{angstrom}. In the most stable (5,5) nanotube-diamond structure the interaction between the nanotube and the diamond surface produces a 0.6 eV band gap near the Fermi level, but the metallic character of the nanotube is maintained in the two other, less strongly bound nanotunnel structures. No charge transfer occurs between the diamond surface and the nanotunnels in any of the three orientations. Binding energies decrease with increases in tube diameter, to the extent that one of the three nanotunnel structures is not formed by (9,9) carbon nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of Water and Carbonates in Photocatalytic Transformation of CO2 to CH4 on Titania

Using the electron paramagnetic resonance technique, we have elucidated the multiple roles of water and carbonates in the overall photocatalytic reduction of carbon dioxide to methane over titania nanoparticles. The formation of H atoms (reduction product) and {sm_bullet}OH radicals (oxidation product) from water, and CO{sub 3}{sup -} radical anions (oxidation product) from carbonates, was detected in CO{sub 2}-saturated titania aqueous dispersion under UV illumination. Additionally, methoxyl, {sm_bullet}OCH{sub 3}, and methyl, {sm_bullet}CH{sub 3}, radicals were identified as reaction intermediates. The two-electron, one-proton reaction proposed as an initial step in the reduction of CO{sub 2}, on the surface of TiO{sub 2}, is supported by the results of first-principles calculations.

03 NATURAL GAS↗

A Theoretical Study of CO2 Anions on Anatase (101) Surface

Binding configurations of CO2 and CO2 - on perfect and oxygen-deficient anatase (101) surfaces were explored using first-principles calculations on both cluster and periodic models. The solvent effect was taken into account via the polarizable continuum model. Analysis of molecular orbitals, charge, and spin density distributions was used to help identify the radical anion CO2 - adsorbed on the surface. On defect-free surfaces, it is found to bind as a bridging bidentate configuration with both oxygens coordinating to the 5-fold Ti ions. Analysis of vibrational frequencies provides a specific signature of the CO2 anion to distinguish it from other species in experiments. The reduction potential of adsorbed CO2 on a (101) surface is lower by 0.24 V than the reduction potential of a CO2 molecule, both in aqueous solution, due to the formation of hybridized orbitals, which facilitates charge transfer to CO2. The reduced (101) surface of TiO2 is much more favorable for CO2 binding with accompanying charge transfer to CO2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative Density Functional Study of Methanol Decomposition on Cu4 and Co4 Clusters

A density functional theory study of the decomposition of methanol on Cu4 and Co4 clusters is presented. The reaction intermediates and activation barriers have been determined for reaction steps to form H2 and CO. For both clusters, methanol decomposition initiated by C-H and O-H bond breaking was investigated. In the case of a Cu4 cluster, methanol dehydrogenation through hydroxymethyl (CH2OH), hydroxymethylene (CHOH), formyl (CHO), and carbon monoxide (CO) is found to be slightly more favorable. For a Co4 cluster, the dehydrogenation pathway through methoxy (CH3O) and formaldehyde (CH2O) is slightly more favorable. Each of these pathways results in formation of CO and H2. The Co cluster pathway is very favorable thermodynamically and kinetically for dehydrogenation. However, since CO binds strongly, it is likely to poison methanol decomposition to H2 and CO at low temperatures. In contrast, for the Cu cluster, CO poisoning is not likely to be a problem since it does not bind strongly, but the dehydrogenation steps are not energetically favorable. Pathways involving C-O bond cleavage are even less energetically favorable. The results are compared to our previous study of methanol decomposition on Pd4 and Pd8 clusters. Finally, all reaction energy changes and transition state energies, including those for the Pd clusters, are related in a linear, Broensted-Evans-Polanyi plot.

10 SYNTHETIC FUELS↗

Oxidative decomposition of methanol on subnanometer palladium clusters : the effect of catalyst size and support composition.

Size and support effects in the oxidative decomposition of methanol on amorphous alumina supported subnanometer palladium clusters were studied under realistic reaction conditions of pressure and temperature. The smaller Pd{sub 8-12} clusters were found to promote the decomposition channel to CO and hydrogen, however with mediocre activity due to poisoning. The larger Pd{sub 15-18} clusters preferentially produce dimethyl ether and formaldehyde, without signs of posioning. A thin titania overcoat applied on the Pd{sub 15-18} improves the sintering-resistance of the catalyst. Accompanying density functional calculations confirm the posioning of small Pd clusters by CO.

08 HYDROGEN↗

Fabrication and characterization of platinum nanoparticle arrays of controlled size, shape and orientation.

We present a rigorous approach for the shape design of supported metal nanoparticle catalysts, morphologically identical to each other and epitaxially grown on strontium titanate substrates using electron beam lithography. We predict the particle shapes using Wulff construction based on density functional theory calculations of surface energies. Then, according to the theoretical predictions, we are able to tweak morphologies of the already produced nanocrystals by changing annealing conditions. The ability to design, produce and characterize the catalyst nanoparticles allows us to relate microscopic morphologies with macroscopic oxygen-reduction activities in perchloric acid [Komanicky et al., J. Am. Chem. Soc. 131 (2009) 5732]. The unexpectedly high oxygen-reduction activities proportional to inactive (1 0 0) facets led us to suggest a model where the reaction intermediates can cross over to neighboring facets in nanoscale proximity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Fe-xN sites in carbon nanotubes.

To reduce fuel cell cost, durable and inexpensive electrode catalysts need to be developed to replace precious metal materials, particularly for the electrocatalytic oxygen reduction at cathodes. In this study, we explored the structure and the energetics of Fe-xN (x = 2,4) incorporated into carbon nanotubes and graphene using density functional theory to show that these structures are more stable than iron atoms on nanotubes and that pyridinic structures of Fe-4N are more favorable than pyrrolic structures. EXAFS spectra simulated from the optimized structures show good agreement with results of measurements obtained on arrays of aligned nanotubes doped with iron and nitrogen, which have demonstrated activity toward oxygen-reduction reactions.

30 DIRECT ENERGY CONVERSION↗

Theoretical investigation of the vibrational properties of BeH{sub 2} and Li{sub 2}BeH{sub 4}.

First-principles calculations of BeH{sub 2} and Li{sub 2}BeH{sub 4} were performed and compared to inelastic neutron scattering. The crystal structure (P2{sub 1}/c space group) of Li{sub 2}BeH{sub 4} contains BeH{sub 4} tetrahedral units similar to those in {alpha}-BeH{sub 2} (Ibam space group) but separated from each other by Li atoms. Calculated vibrational density of states revealed the origin of the observed major vibrational modes. Charge-density maps and electronic density of states indicate interplay between covalent and ionic bondings in Li{sub 2}BeH{sub 4} and provide a better understanding of the nature of the bonding in these materials.

36 MATERIALS SCIENCE↗

Monomeric vanadium oxide on a {theta}-Al{sub 2}O{sub 3} support : a combined experimental/theoretical study.

A combined experimental and theoretical study of vanadium oxide monomers on a {theta}-alumina surface under different environments has identified four different structures. Deep UV Raman results suggest that vanadia is attached predominantly to an aluminum site that was an isolated terminal Al?OH group on the {theta}-alumina surface. The preresonance Raman spectra for vanadium oxide supported on {theta}-alumina with a very low VO{sub x} surface density show three distinct V{double_bond}O bands under dehydrated conditions. The observed frequencies match well with the calculated stretching frequencies from B3LYP density functional theory for tridendate, bidendate, and molecular structures of vanadium oxide monomers on a dehydrated surface. The free energies calculated for these three structures from density functional theory as a function of temperature suggest that all three could exist on the surface with the tridentate structure being the most stable of the three on the dehydrated surface. Different structures and different degrees of vibrational coupling of V?O to V{double_bond}O modes may cause the appearance of three V{double_bond}O bands in the preresonance Raman spectra. On the hydrated surface, the Raman spectra show a V?O band, in agreement with the calculated frequency for a monodentate structure on this surface. Finally, the calculated free energies of hydrated and dehydrated surfaces indicate a transition from a hydrated to a dehydrated {theta}-alumina surface occurs at around 600 K at 10{sup -6} atm pressure of H{sub 2}O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Subnanometer platinum clusters highly active and selective catalysts for the oxidative dehydrogenation of propane.

Small clusters are known to possess reactivity not observed in their bulk analogues, which can make them attractive for catalysis. Their distinct catalytic properties are often hypothesized to result from the large fraction of under-coordinated surface atoms. Here, we show that size-preselected Pt{sub 8-10} clusters stabilized on high-surface-area supports are 40-100 times more active for the oxidative dehydrogenation of propane than previously studied platinum and vanadia catalysts, while at the same time maintaining high selectivity towards formation of propylene over by-products. Quantum chemical calculations indicate that under-coordination of the Pt atoms in the clusters is responsible for the surprisingly high reactivity compared with extended surfaces. We anticipate that these results will form the basis for development of a new class of catalysts by providing a route to bond-specific chemistry, ranging from energy-efficient and environmentally friendly synthesis strategies to the replacement of petrochemical feedstocks by abundant small alkanes.

02 PETROLEUM↗

Tailoring the load carrying capacity of MWCNTs through inter-shell atomic bridging.

Recent studies have finally produced accurate measurements of the mechanical properties of carbon nanotubes, confirming the anticipated results computed from quantum and molecular mechanics. Several studies have also predicted an enhancement of these material properties as a result of electron irradiation. Here we prove conclusively through a rigorous TEM imaging study that this enhancement occurs as a result of multiple-shell load transfer through irradiation-induced crosslinks. Using a computational model of the system which mirrors the experimental setup, we show that intershell covalent crosslinks resulting from the irradiation are efficient atomic structures for inter-shell load transfer. A study of the correlation between number of defects and load transfer provides insight into the experimental results and quantifies the increase in load transfer with radiation dose. The combined experimental/computational approach therefore gives a complete understanding of the phenomenon and provides the means for tailoring the mechanical properties of 1-D nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Shape-dependent activity of platinum array catalyst.

We produced millions of morphologically identical platinum catalyst nanoparticles in the form of ordered arrays epitaxially grown on (111), (100), and (110) strontium titanate substrates using electron beam lithography. The ability to design, produce, and characterize the catalyst nanoparticles allowed us to relate microscopic morphologies with macroscopic catalytic reactivities. We evaluated the activity of three different arrays containing different ratios of (111) and (100) facets for an oxygen-reduction reaction, the most important reaction for fuel cells. Increased catalytic activity of the arrays points to a possible cooperative interplay between facets with different affinities to oxygen. We suggest that the surface area of (100) facets is one of the key factors governing catalyst performance in the electrochemical reduction of oxygen molecules.

30 DIRECT ENERGY CONVERSION↗