Engineering topics

Zehender, Marius H.

Publications and source records attributed to Zehender, Marius H..

4 records

DOE OSTI2022

Progress in three-terminal heterojunction bipolar transistor solar cells

Conventional solar cells, including multijunction solar cells, are based on pn junctions as building blocks. In contrast, the three-terminal heterojunction bipolar transistor solar cell (3T-HBTSC) explores the use of a bipolar transistor structure to build a solar cell. The limiting efficiency of this transistor structure equals that of a double-junction solar cell. However, since the 3T-HBTSC does not require tunnel junctions, its minimal structure has only three semiconductor layers, while the minimal structure of a double junction solar cell has six. This work reviews the operation principles of this solar cell and the steps carried out towards its practical implementation. Experimental results on a GaInP/GaAs HBTSC prototype with bottom interdigitated contacts are presented.

14 SOLAR ENERGY↗

DOE OSTI2021

Compensated Contacts for Three-Terminal Transistor Solar Cells

The heterojunction bipolar transistor solar cell (HBTSC) is an alternative to conventional double-junction solar cells that combines the advantages of three-terminal architectures with a compact design. A critical part of the HBTSC fabrication is the implementation of the middle contact, the one associated to the base layer in the transistor structure, because this layer can be damaged by the diffusion of metallic species during contact annealing. As a solution we propose to implement a "compensated contact", that is, to leave a thin (< 200 nm) portion of emitter or collector between the base layer and the contact metals and compensate its doping during contact annealing. Using an Au/Zn/Au metal structure to compensate a 150 nm thick portion of the collector, we obtain a specific contact resistance ~8 10-4 ..omega.. cm2. This value is fairly invariant for annealing temperatures between 400 and 460 degrees C and annealing times between 2 and 5 minutes, and it does not improve by adding Pd to the metallic stack. Optimizing the compensated contact technology opens the path to the realization of III-V-material-based HBTSCs with open-circuit voltages and fill factors comparable to those of conventional multijunction architectures.

contact resistance↗

DOE OSTI2021

Inverted GaInP/GaAs Three-Terminal Heterojunction Bipolar Transistor Solar Cell

Here we present the experimental results of an inverted three-terminal heterojunction bipolar transistor solar cell (HBTSC) made of GaInP/GaAs. The inverted growth and processing enables contacting the intermediate layer from the bottom, which increases the cell performance by reducing shadow factor and series resistance at the same time. With this prototype we show that an inverted processing of a three-terminal solar cell is feasible and pave the way for the application of epitaxial lift-off, substrate reuse and mechanical stacking to the HBTSC which can eventually lead to a low-cost high-efficiency III-V-on-Si HBTSC technology.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2020

Demonstrating the GaInP/GaAs Three-Terminal Heterojunction Bipolar Transistor Solar Cell

The three-terminal heterojunction bipolar transistor solar cell (HBTSC) concept enables the realization of a monolithic double-junction device with individual current extraction. We present an HBTSC realized by a heterojunction of GaInP and GaAs. The one-sun open-circuit voltage (V OC ) of the top and bottom junctions are 1.33 V and 0.99 V, respectively, while fill factors (FF) are above 80%. At one-sun illumination, reducing one junction's bias from V OC to maximum power point degrades the performance of the other junction only slightly (<; 0.5% efficiency loss). These results demonstrate the potential of the HBTSC concept to produce high-efficiency independently connected double-junction solar cells.

14 SOLAR ENERGY↗