Search NASA⌕ Search

Engineering topics

Zeller, Matthias

Publications and source records attributed to Zeller, Matthias.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Venturing Past Uranium: Synthesis of a Np(IV) Polyoxomolybdate–Alkoxide Sandwich Complex

The synthesis of a Np(IV) polyoxomolybdate– alkoxide sandwich complex, (TBA) 2 [Np{Mo 5 O 13 (OMe) 4 NO} 2 ] (TBA = tetrabutylammonium), is reported. This compound represents a rare example of a neptunium polyoxometalate cluster isolated outside of water, allowing for characterization of its electrochemical properties in nonaqueous solvents. Complexation of An(IV) cations fine-tunes the redox properties of the cluster, with the observed four reversible reductive events varying slightly both in potential and peak separation depending on the actinide present. The new Np(IV) complex also shows an irreversible event assigned to oxidation of Np(IV) to Np(V). New methodology for facile 17 O enrichment of (TBA) 2 [Mo 5 O 13 (OMe) 4 NO][Na(MeOH)] is presented, which provides a simple pathway to 17 O enriched analogues of the sandwich complexes discussed (Zr(IV), Hf(IV), Th(IV), U(IV), U(V), Np(IV)). 17 O NMR spectroscopy subsequently provides insights into both the nature of metal–oxygen bonding, as well as the influence of unpaired f-electrons on the local environment of the oxygen nuclei.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nucleophilic Displacement Reactions of Silver-Based Metal–Organic Chalcogenolates

Here, we report nucleophilic displacement reactions that can increase the dimensionality or coordination number of silver-based metal–organic chalcogenolates (MOChas). MOChas are crystalline ensembles containing one-dimensional (1D) or two-dimensional (2D) inorganic topologies with structures and properties defined by the choice of metal, chalcogen, and ligand. MOChas can be readily prepared from a variety of small-molecule ligands and metals or metal ions. Although MOChas offer ligand diversity, most reported examples use relatively small ligands, typically involving short alkyl chains, aryl rings, or molecular cages. This is because larger, more complex molecules often yield poor product morphologies with indeterminate structures. In this study, we overcame this limitation by employing a ligand exchange strategy whereby a 1D MOCha, silver(I) methyl 2-mercaptobenzoate (2MMB), is used as a silver source for preparing 2D examples. The reaction proceeds generally toward products composed of the stronger nucleophile. We show that the reaction prefers displacing 1D topologies to yield 2D ones and replacing thiolates with selenolates. We performed a study to characterize the mechanism by which organic chalcogenols and dichalcogenides exchange with MOChas. The collected data and product analysis support a proposed mechanism of nucleophilic substitution, explaining how both organic chalcogenols and dichalcogenides can displace ligands in MOChas. This work provides a new synthetic route that will enable the preparation of more elaborate MOChas and heterostructures thereof. This approach enabled the preparation of previously inaccessible oligophenyl MOChas, which were successfully solved via small-molecule serial femtosecond crystallography (smSFX) at the SPring-8 Ångström Compact Free Electron LAser (SACLA) facility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Rigidochromism of tetranuclear Cu( I )–pyrazolate macrocycles: steric crowding with trifluoromethyl groups

Macrocyclic Cu(I)–pyrazolate tetramers (Cu 4 pz 4 ) can fold into compact structures with luminescent Cu 4 cores whose emission wavelengths are sensitive to steric effects along the periphery of the macrocycle. Introducing CF 3 at the C 4 position of 3,5-di- t Bu-pyrazolate increases steric crowding that modifies the conformational behavior of the Cu 4 pz 4 complex, highlighted by a low-temperature martensitic transition. Variable-temperature analysis of solid-state luminescence reveal an unexpected blueshifting of emission with rising temperature.

Rajagopal, Shinaj K.↗
DOE OSTI2024

Vibrational properties of heme-nitrosoalkane complexes in comparison with those of their HNO analogs, and reactivity studies towards nitric oxide and Lewis acids

C-Nitroso compounds (RNO, R = alkyl and aryl) are byproducts of drug metabolism and bind to heme proteins, and their heme-RNO adducts are isoelectronic to ferrous nitroxyl (NO-/HNO) complexes. Importantly, heme-HNO compounds are key intermediates in the reduction of NO to N 2 O and nitrite to ammonium in the nitrogen cycle. Ferrous heme-RNO complexes act as stable analogs of these species, potentially allowing for the investigation of the vibrational and electronic properties of unstable heme-HNO intermediates. In this paper, a series of six-coordinate ferrous heme-RNO complexes (where R = iPr and Ph) were prepared using the TPP 2- and 3,5-Me-BAFP 2- co-ligands, and tetrahydrofuran, pyridine, and 1-methylimidazole as the axial ligands (bound trans to RNO). These complexes were characterized using different spectroscopic methods and X-ray crystallography. The complex [Fe(TPP)(THF)(iPrNO)] was further utilized for nuclear resonance vibrational spectroscopy (NRVS), allowing for the detailed assignment of the Fe–N(R)O vibrations of a heme-RNO complex for the first time. The vibrational properties of these species were then correlated with those of their HNO analogs, using DFT calculations. Our studies support previous findings that RNO ligands in ferrous heme complexes do not elicit a significant trans effect. In addition, the complexes are air-stable, and do not show any reactivity of their RNO ligands towards NO. So although ferrous heme-RNO complexes are suitable structural and electronic models for their HNO analogs, they are unsuitable to model the reactivity of heme-HNO complexes. We further investigated the reaction of our heme-RNO complexes with different Lewis acids. Here, [Fe(TPP)(THF)(iPrNO)] was found to be unreactive towards Lewis acids. In contrast, [Fe(3,5-Me-BAFP)(iPrNO) 2 ] is reactive towards all of the Lewis acids investigated here, but in most cases the iron center is simply oxidized, resulting in the loss of the iPrNO ligand. In the case of the Lewis acid B 2 (pin) 2 , the reduced product [Fe(3,5-Me-BAFP)(iPrNH 2 )(iPrNO)] was identified by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ternary Complexes of BiI 3 /CuI and SbI 3 /CuI with Tetrahydrothiophene

Reactions of BiI 3 /CuI mixtures with tetrahydrothiophene (THT) in toluene produce 2-D sheet networks BiCu 3 I 6 (THT) n (n = 2, 3, or 4), depending on reaction conditions. All three structures are based on BiI 6 octahedra, which share pairs of (μ 2 -I) 2 with Cu 3 (THT) n units. BiCu 3 I 6 (THT) 2 features Cu 2 (μ 2 -I) 2 rhombs with close Cu···Cu interactions and is accompanied by formation of the very complex HBi 3 Cu 12 I 22 (THT) 8 . Reactions of SbI 3 /CuI with THT in toluene produced a SbCu 3 I 6 (THT) 2 network shows Cu 3 (μ 2 -THT) 2 units, like its Bi congener, but Cu 6 (μ 2 -I) 6 barrels rather than rhombs. Isolated SbI 3 units are stacked above the Cu 6 I 6 barrels. A molecular compound, Sb 3 Cu 3 I 12 (THT) 6 consists of a face-sharing Sb 3 I 12 stack, in which the Cu-THT units are bonded in asymmetric fashion about the central SbI 6 . Metal-halide bonds were investigated via QTAIM and NLMO analyses, demonstrating that these bonds are largely ionic and occur between the Bi/Sb and I p orbitals. Hirshfeld analysis shows significant H···H and H···I interactions. Diffuse reflectance spectroscopy (DRS) reveals band edges for the Bi species of 1.71–1.82 eV, while those for the neutral Sb complexes are in the range of 1.94–2.06 eV. Mapping of the electronic structure via density of state calculations indicates population of antibonding Bi/Sb–I orbitals in the excited state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Lewis base adducts of NpCl 4

NpCl 4 (MeCN) 4 (1), NpCl 4 (pyr) 4 (2), NpCl 4 ( t Bu Bipy) 2 (3) and NpCl 4 (OPPh 3 ) 2 (4) were isolated and fully characterized using spectroscopic and structural analyses.

Lopez, Lauren M.↗
DOE OSTI2024

Multi‐electron Oxidation of Ce(III) Complexes Facilitated by Redox‐Active Ligands

A family of cerium complexes featuring a redox-active ligand in different oxidation states has been synthesized, including the the iminosemiquinone (isq) 1− compound, Ce( dipp isq) 3 (1-Ceisq), and the amidophenolate (ap) 2− species Ce III ( dipp ap) 3 K 3 (2-Ceap), [Ce III ( dipp ap) 3 K][K(18-c-6)] 2 (2-Ceap 18c6), and [Ce III ( dipp ap) 3 K][K(15-c-5) 2 ] 2 (2-Ceap 15c5). Treating 2-Ceap 15c5 with dioxogen furnishes the cerium(IV) derivative [Ce IV ( dipp ap) 3 ][K(15-c-5) 2 ] 2 (3-Ceap 15c5), and an analogous synthesis can be used to generate [Ce IV ( dipp ap) 3 ][K(crypt)] 2 (3-Ceap crypt). Similarly, addition of hexamethyldisiloxane produces an interesting bis(amidophenolate) species, [(Me 3 SiO) 2 Ce IV ( dipp ap) 2 ][K(15-c-5) 2 ] 2 (4-CeOSiMe 3 ). In conclusion, full spectroscopic and structural characterization of each derivative was performed to establish the oxidation states of both the ligands and the cerium ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Significant charge transport effects due to subtle molecular changes in nitroxide radical single crystals

Radical-containing materials have received renewed interest due to their charge-conducting properties. However, most work focuses on macromolecules, while less attention has been paid to radical-containing small molecules. Here, we quantify the electrical conductivity in two organic radical single crystals and demonstrate that a subtle change in atomic connectivity drastically alters the macroscopic electronic properties of the materials. One radical crystal has an electrical conductivity of 3S m –1 , which is the among the highest values for nonconjugated radical conductors over a 1 μm scale. However, the other radical crystal has a 1,000-fold lower conductivity, despite their extremely similar molecular structures. The temperature-dependent conductivity follows the variable range hopping mechanism for both radical crystals, and the difference in effective charge mobility is the reason for the conductivity difference. These results present a clear picture of the design rules and charge transport mechanism for radical-based small-molecule materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dinickel-Catalyzed N═N Bond Rotation

Azoarenes function as molecular switches that can be triggered by external stimuli, such as heat, light, and electrochemical potential. Here, in this work, we show that a dinickel catalyst can induce cis/trans isomerization in azoarenes through a N═N bond rotation mechanism. Catalytic intermediates containing azoarenes bound in both the cis and trans forms are characterized. Solid-state structures reveal the importance of π-back-bonding interactions from the dinickel active site in lowering the N═N bond order and accelerating bond rotation. The scope of the catalytic isomerization includes high-performance acyclic, cyclic, and polymeric azoarene switches.

adducts↗
DOE OSTI2022

Charge transport and antiferromagnetic ordering in nitroxide radical crystals

Nonconjugated radical polymers and small molecules are employed as functional materials in organic electronic devices. Furthermore, the unpaired electrons on these materials have permanent magnetic moments, making these materials promising candidates for organic magnets. Through molecular design, strong antiferromagnetic and ferromagnetic ordering have been achieved in conjugated materials. However, the magnetic properties of nonconjugated radical polymers have only shown weak magnetic interactions among the open-shell sites due to the large mean separation between radicals in typical materials. Here, we have designed, synthesized, and crystalized two open-shell molecules that used molecular engineering to control the assembly of the open-shell sites into a strong antiferromagnetically ordered network. The strong antiferromagnetic interaction is evidenced by a high paramagnetic-to-antiferromagnetic transition temperature of ~40 K. This high transition temperature was a result of a high spin exchange coupling constant J of about –20 cm –1 , which was suggested by both experimental and computed coupling parameters given by the energy difference between high-spin and low-spin broken-symmetry structures. In addition, a single-crystal electrical conductivity of ~10 –3 S m –1 was achieved, which indicated the potential of this material in electronic applications. As a result, this work provides an insight into a design strategy for radical-based electronic and magnetic materials through proper molecular structure modifications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spatiotemporal Route to Understanding Metal Halide Perovskitoid Crystallization

Here, a spatiotemporal experimental route is reported for the antisolvent vapor diffusion crystal growth of metal halide perovskitoids. A computational analysis combining automated image capture and diffusion modeling enables the determination of the critical concentrations required for nucleation and crystal growth from a single experiment. Five different solvent systems and ten distinct organic ammonium iodide salts were investigated with lead iodide, from which nine previously unreported compounds were discovered. Automated image capture of the mother liquor and antisolvent vials was used to determine changes in solution meniscus positions and detect the nucleation event location. Matching the observations to a numerical solution of Fick's second law diffusion model enables the calculation of reactant, solvent, and antisolvent concentrations at both the time and position of the first stable nucleation and crystal growth. A machine learning model was trained on the resulting data, and it reveals solvent- and amine-specific crystallization tendencies. Solvent systems that interact more weakly with dissolved lead species promote crystallization, while those with stronger interactions can prevent crystallization through increased solubilities. Organic amines that interact more strongly with inorganic components and exhibit greater rigidity are more likely to be incorporated into crystalline products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dimensional Control over Metal Halide Perovskite Crystallization Guided by Active Learning

Metal halide perovskite (MHP) derivatives, a promising class of optoelectronic materials, have been synthesized with a range of dimensionalities that govern their optoelectronic properties and determine their applications. We demonstrate a data-driven approach combining active learning and high-throughput experimentation to discover, control, and understand the formation of phases with different dimensionalities in the morpholinium (morph) lead iodide system. Using a robot-assisted workflow, we synthesized and characterized two novel MHP derivatives that have distinct optical properties: a one-dimensional (1D) morphPbI 3 phase ([C 4 H 10 NO][PbI 3 ]) and a two-dimensional (2D) (morph) 2 PbI 4 phase ([C 4 H 10 NO] 2 [PbI 4 ]). To efficiently acquire the data needed to construct a machine learning (ML) model of the reaction conditions where the 1D and 2D phases are formed, data acquisition was guided by a diverse-mini-batch-sampling active learning algorithm, using prediction confidence as a stopping criterion. Querying the ML model uncovered the reaction parameters that have the most significant effects on dimensionality control. Based on these insights, we discuss possible reaction schemes that may selectively promote the formation of morph-Pb-I phases with different dimensionalities. The data-driven approach presented here, including the use of additives to manipulate dimensionality, will be valuable for controlling the crystallization of a range of materials over large reaction-composition spaces.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis of Non-Aqueous Neptunium(III) Halide Solvates from NpO 2

We report two Np(III) halides, NpI 3 (THF) 4 and NpBr 3 (THF) 4 , have been prepared and isolated in high yields as described in this work. Starting with neptunia (NpO 2 ), NpCl 4 (DME) 2 was first generated in an updated, higher yielding synthesis than what was previously reported by using HCl/HF. This material was then reduced with KC 8 , followed by subsequent ligand exchange, to generate NpBr 3 (THF) 4 and NpI 3 -(THF) 4 . Full characterization by single-crystal X-ray crystallography, 1 H NMR spectroscopy and electronic absorption spectroscopy confirmed the molecular formulas and oxidation states. These trivalent materials are straightforward to synthesize and can be used as starting materials for non-aqueous Np(III) chemistry, obviating the need for rare and restricted Np metal and elemental halogens.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗