Engineering topics

Zent, A. P.

Publications and source records attributed to Zent, A. P..

51 records · Page 3

NASA NTRS1991

Conceptual designs for in situ analysis of Mars soil

A goal of this research is to develop conceptual designs for instrumentation to perform in situ measurements of the Martian soil in order to determine the existence and nature of any reactive chemicals. Our approach involves assessment and critical review of the Viking biology results which indicated the presence of a soil oxidant, an investigation of the possible application of standard soil science techniques to the analysis of Martian soil, and a preliminary consideration of non-standard methods that may be necessary for use in the highly oxidizing Martian soil. Based on our preliminary analysis, we have developed strawman concepts for standard soil analysis on Mars, including pH, suitable for use on a Mars rover mission. In addition, we have devised a method for the determination of the possible strong oxidants on Mars.

Mckay, C. P.↗

NASA NTRS1991

Getting water from the water of hydration on Mars

Both Viking landers found evidence of water in small concentration in the soils of Mars. Using the gas chromatograph mass spectrometer the soil samples on Mars were heated to 500 C to release the water. This result lead researchers to believe that the water in the soil of Mars was tightly bound in a hydration state. In the laboratory several Mars analog soils and a few bench mark soils were run through a microwave to determine the amount of water released using this method. The results suggest that sufficient water can be obtained using this method to augment the activities of a human base on Mars.

Gwynne, O.↗

NASA NTRS1991

Distillation of H2O from hard-frozen Martian permafrost

The authors present a method for distillation of hard-frozen Martian permafrost. A cable-tool is drilled into hard frozem permafrost to a depth of 10 to 20 m. They calculate that a 10 m hole could be drilled in a few days. A 10 m shaft with a diameter equal to the bore is inserted into the hole, and a air tight tent-like structure is erected over the borehole. Photovoltaic cells mounted on the tent supply electrical energy that is dissipated in the shaft. Drilling power can be supplied by other sources. With 1000 watts, the shaft can be heated to near 350 K, producing relatively high temperatures in the vicinity of the borehole. Surrounding H2O is vaporized and diffuses up through the regolith. The authors calculate that a tent of a radius of no more than a few meters would intercept most of the H2O as it diffused to the surface. Calculations suggest that it would require perhaps 30 days to extract H2O from most of the volume drained by this technique. Assuming that the hard frozen regolith is no more than 10 percent ice, the author's calculate that that about 2890 kg of H2O could be extracted in 30 days. Since the nominal requirement for each crew member is about 5 kg/day, one such borehole might be expected to supply enough H2O to maintain a crew of 5 for perhaps 100 days. Additional engineering studies will be done to attempt to improve the capacity or efficiency of this method.

Zent, A. P.↗

NASA NTRS1988

The record of Martian climatic history in cores and its preservation

Among the questions to be addressed by a Mars Sample Return Mission are the history of the Martian climate and the mechanisms that control the volatile cycles. Unfortunately, the evidence that bears most strongly on those issues lies in the volatile distribution in, and physical configuration of, a very delicate and volatile system: the uppermost Martian regolith. Some useful measurements to be made on returned samples of the regolith are identified, along with the many critical considerations in ensuring the usefulness of returned samples.

Zent, A. P.↗

NASA NTRS1987

The role of regolith adsorption in the transition from early to late Mars climate

Researchers reexamined radiative transfer models of early Mars that were advanced to show the existance of a greenhouse effect. These models were reexamined with regard to the effect that regolith adsorption may have had. It is argued that while the precipitation of carbonates has probably been an important process during Mars history, the rates at which this process could have taken place under early Mars conditions would have dropped sharply once liquid water was fairly scarce. Furthermore, conditions under which liquid water was available may have involved efficient recycling of carbonate so that steady state conditions rather than irreversible CO2 removal prevailed. In contrast, the growth of regolith surface area demands corresponding and predictable CO2 removal from the atmosphere-cap system and is fully capable of terminating any enhanced temperature regime on early Mars in the absence of any other effects.

Fanale, F. P.↗

NASA NTRS1987

Episodic vs. epochal release of SO2 on Mars

Erosion of the Martian surface by the flow of liquid water has apparently taken place at different times and locations on the planet. Many attempts were made to explain the valley networks by invoking a strong atmospheric CO2/H2O greenhouse early in the history of the planet. It was assumed that the large amounts of CO2 necessary to cause the greenhouse would have disappeared due to carbonate formation. Carbonates have yet to be positively identified. Volcanism has occurred throughout much of the history of Mars. Presumably gases such as SO2 were released along with CO2 and H2O. Estimates of amounts and rates with which SO2 were released into the Martian atmosphere, and how this would effect the global climate were made. Studies are continuing on the effects of SO2 and other volcanic gases on Martian climatic history.

Postawko, S. E.↗

NASA NTRS1987

Coadsorption of H2O and CO2 on the Martian surface

The adsorption of both CO2 and H2O was measured, under conditions of temperature and partial pressure similar to Mars, for a variety of absorbents. Both adsorb at coverages that exceed a monolayer at their respective Martian abundances. Clearly, their simultaneous presence in the Martian atmosphere will result in coadsorption of both at concentrations that may differ greatly from those measured during separate measurements. To the best of our knowledge, no data exists on the coadsorption of both gases. Co-adsorption experiments were begun and pertinent results will be reported. In the meantime the predicted behavior of such a system was mathematically explored as a compliment to the data, and to aid in its eventual interpretation.

Zent, A. P.↗

NASA NTRS1987

Is regolith absorbtion the explanation for the transition from early to present Mars climate

Experimental data is presented for CO2 adsorption on palagonites (now thought to provide the most acceptable spectral match to Mars weathering products). When corrected for great differences in specific surface area, the adsorptive behavior exhibited by palogonites, nontronite, and basalt with respect to CO2 can be (approx.) described by the same generic equation. Using this relationship normalized to a Mars soil surface area, and the dependence of subsurface temperatures on latitude and depth, the current inventory of regolith absorbed CO2 was estimated.

Fanale, F. P.↗

NASA NTRS1987

Absorption of the Martian regolith: Specific surface area and missing CO(sub 2)

For most estimates of available regolith and initial degassed CO(sub 2) inventories, it appears that any initial inventory must have been lost to space or incorporated into carbonates. Most estimates of the total available degassed CO(sub 2) inventory are only marginally sufficient to allow for a major early greenhouse effect. It is suggested that the requirements for greenhouse warming to produce old dessicated terrain would be greatly lessened if groundwater brines rather than rainfall were involved and if a higher internal gradient were involved to raise the water (brine) table, leading to more frequent sapping.

Zent, A. P.↗

NASA NTRS1986

Global distribution and migration of subsurface ice on Mars

An analytical model is developed for the factors which changed the initial distribution and state of H2O, mainly trapped as subsurface ice, on Mars. A uniform initial ice distribution is assumed, and changes in ice layer thickness are calculated at discrete latitudes of Mars. The thermal/diffusive model used for the calculations accounts for variations in the solar luminosity, the planetary obliquity and eccentricity, with obliquity starting 3.5 Gyr ago, and insolation at various latitudes. Attention is given to variations in the albedo due to seasonal CO2 variations, in the regolith temperature, and in atmospheric pressure. Migration of H2O into and out of the regolith is a function of the H2O vapor temperature at the subsurface ice boundary and the annual average H2O at the base of the atmosphere. Projections of the ice thickness over 100 obliquity periods indicate that the intensity of the obliquity effects are latitudinally dependent. H2O atmospheric concentrations are projected to vary up to six orders of magnitude over an obliquity cycle.

Fanale, F. P.↗

NASA NTRS1986

Distribution and state of H2O in the high-latitude shallow subsurface of Mars

The state and distribution of H2O molecules at high latitudes are evaluated numerically with emphasis on the effects of seasonal temperatures on the kinetics of H2O transport. The investigation is carried out with a thermal model for the regolith regions from the surface through the ice interface and an atmospheric model for the H2O vapor density at the surface as a function of latitude. Few differences are found in the state and distribution of H2O whether the regolith is composed of Montmorillonite or basalt. During an obliquity cycle, the average exchanged H2O mass is determined to be in the range 1-20 gr/sq cm over the planetary surface, with a total maximum exchanged volume of 1500 cu km of H2O. The exchanged mass would arise mainly from ground ice in the case of a basalt regolith and from adsorbed H2O with Montmorillonite. Finally, seasonal ice stabilization is expected to occur at latitudes above 40 deg when obliquities exceed 25 deg.

Zent, A. P.↗

NASA NTRS1986

Possible Mars brines - Equilibrium and kinetic considerations

To determine the fate of postulated near surface brines on Mars, the rate of H2O mass loss from subsurface brines was calculated as a function of latitude, depth, regolith porosity, eutectic temperature, and pore size. A model for a chemically reasonable brine that could reproduce Martian radar results was developed, and the escape rate of H2O molecules from such a brine was estimated. It is suggested that the presence of a low-permeability duricrust may be required to preserve such a brine for reasonable periods, and to prevent detection of an extensive subsurface system by the Viking MAWD instrument.

Zent, A. P.↗

NASA NTRS1985

Mars: Long Term Changes in the State and Distribution of H2O

A model for H2O distribution and migration on Mars was formulated which takes into account: (1) thermal variations at all depths in the regolith due to variations in obliquity, eccentricity and the solar constant; (2) variations in atmospheric PH2O caused by corresponding changes in polar surface insolation; and (3) the finite kinetics of H2O migration in both the regolith and atmosphere. Results suggest that regolith H2O transport rates are more strongly influenced by polar-controlled atmospheric PH2O variations than variations in pore gas PH2O brought about by thermal variations at the buried ice interface. The configuration of the ice interface as a function of assumed soil parameter and time is derived. Withdrawal of ice proceeds to various depths at latitudes less than 50 deg and is accompanied by filling of regolith pores at latitudes greater than 50 deg and transfer of H2O to the polar cap. The transfer has a somewhat oscillatory character, but only less than 1g/sq cm is shifted into and out the regolith during each obliquity cycle. It is concluded that this process combined with periodic thermal cycles played a major role in development of the fretted terrain, deflationary features in general, patterned ground, the north polar cap and the layered terrain.

Fanale, F. P.↗

NASA NTRS1983

Frost grain size metamorphism - Implications for remote sensing of planetary surfaces

The effective grain size of a material on a planetary surface affects the strength of absorption features observed in the reflectance of a particulate surface. In the case of a planetary surface containing volatile ices, the absorption characteristics can change in connection with processes leading to a change in the grain size of the material. The present investigation is concerned with an evaluation regarding the occurrence of such processes and the implications for remote sensing applications. It is found that quantitative modeling of the kinetics of grain growth and destruction by thermal and nonthermal processes can provide a means to reconcile apparent optical paths in the volatile portions of planetary surfaces with the physical history of those surfaces. Attention is also given to conditions in the case of the Pluto/Triton system, Uranus and Saturnian satellites, and the Galilean system.

Clark, R. N.↗

NASA NTRS1982

Classification of surface units in the equatorial region of Mars based on Viking Orbiter color, albedo, and thermal data

Clusters corresponding to mappable surface units are sought in Viking Orbiter color, albedo, and thermal inertia data for the equatorial region of Mars. A principal components analysis indicated that 84% of the variance within the data for this region can be carried along two vector directions which typify the dominant trend of Martian surface materials. These dominant trends were deemphasized by stretching the data from a five-dimensional elliptical swarm into a hypersphere, through the use of principal component techniques. The decorrelated data were then plotted in a triangle diagram with red/violet, albedo and thermal inertia apices to facilitate inherent cluster discrimination. As many as eight clusters can be identified, with important mixing between them. The three major clusters consist of red and grey material extremes, along with intermediate value materials.

Arvidson, R. E.↗