Search NASA⌕ Search

Engineering topics

Zevalkink, Alexandra

Publications and source records attributed to Zevalkink, Alexandra.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Microscale Imaging of Thermal Conductivity Suppression at Grain Boundaries

Abstract Grain‐boundary engineering is an effective strategy to tune the thermal conductivity of materials, leading to improved performance in thermoelectric, thermal‐barrier coatings, and thermal management applications. Despite the central importance to thermal transport, a clear understanding of how grain boundaries modulate the microscale heat flow is missing, owing to the scarcity of local investigations. Here, thermal imaging of individual grain boundaries is demonstrated in thermoelectric SnTe via spatially resolved frequency‐domain thermoreflectance. Measurements with microscale resolution reveal local suppressions in thermal conductivity at grain boundaries. Also, the grain‐boundary thermal resistance – extracted by employing a Gibbs excess approach – is found to be correlated with the grain‐boundary misorientation angle. Extracting thermal properties, including thermal boundary resistances, from microscale imaging can provide comprehensive understanding of how microstructure affects heat transport, crucially impacting the materials design of high‐performance thermal‐management and energy‐conversion devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigating the Role of Vacancies on the Thermoelectric Properties of EuCuSb‐Eu 2 ZnSb 2 Alloys

Abstract AMX compounds with the ZrBeSi structure tolerate a vacancy concentration of up to 50 % on the M ‐site in the planar MX ‐layers. Here, we investigate the impact of vacancies on the thermal and electronic properties across the full EuCu 1− x Zn 0.5 x Sb solid solution. The transition from a fully‐occupied honeycomb layer (EuCuSb) to one with a quarter of the atoms missing (EuZn 0.5 Sb) leads to non‐linear bond expansion in the honeycomb layer, increasing atomic displacement parameters on the M and Sb‐sites, and significant lattice softening. This, combined with a rapid increase in point defect scattering, causes the lattice thermal conductivity to decrease from 3 to 0.5 W mK −1 at 300 K. The effect of vacancies on the electronic properties is more nuanced; we see a small increase in effective mass, large increase in band gap, and decrease in carrier concentration. Ultimately, the maximum zT increases from 0.09 to 0.7 as we go from EuCuSb to EuZn 0.5 Sb.

Chanakian, Sevan↗
DOE OSTI2023

Investigating the Role of Vacancies on the Thermoelectric Properties of EuCuSb‐Eu 2 ZnSb 2 Alloys

Abstract AMX compounds with the ZrBeSi structure tolerate a vacancy concentration of up to 50 % on the M ‐site in the planar MX ‐layers. Here, we investigate the impact of vacancies on the thermal and electronic properties across the full EuCu 1− x Zn 0.5 x Sb solid solution. The transition from a fully‐occupied honeycomb layer (EuCuSb) to one with a quarter of the atoms missing (EuZn 0.5 Sb) leads to non‐linear bond expansion in the honeycomb layer, increasing atomic displacement parameters on the M and Sb‐sites, and significant lattice softening. This, combined with a rapid increase in point defect scattering, causes the lattice thermal conductivity to decrease from 3 to 0.5 W mK −1 at 300 K. The effect of vacancies on the electronic properties is more nuanced; we see a small increase in effective mass, large increase in band gap, and decrease in carrier concentration. Ultimately, the maximum zT increases from 0.09 to 0.7 as we go from EuCuSb to EuZn 0.5 Sb.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning anisotropic bonding via chemistry and pressure in layered pnictides and chalcogenides (Final Report)

The overarching goal of this research program, as originally delineated in the proposal “Tuning anisotropic bonding via chemistry and pressure in layered pnictides and chalcogenides” was to develop a predictive, chemistry-driven understanding of the impact of the phonon behavior on thermal properties of bulk layered materials. At finite temperatures, atomic vibrations (phonons) strongly impact the thermodynamics, thermal and electrical transport, and phase-switching properties of functional materials. In particular, soft phonon modes and strongly anharmonic potentials can have spectacular consequences, including structural phase transitions (for example in ferroelectrics and phase-change memory materials), metal-insulator transitions, and extreme thermal resistance preventing heat propagation. Bulk materials with highly-anisotropic bonding may provide unique strategies to induce soft-phonon modes and lattice instabilities. Recently, increasingly detailed investigations of the lattice dynamics in layered materials have been made possible by the advent of first-principles phonon calculations and advanced characterization techniques based on neutron and X-ray scattering. However, due to the lack of studies in which composition and bonding character are systematically varied, there are still fundamental questions regarding the impacts of anisotropic bonding and anharmonicity on lattice stability and thermal transport. One of the major goals of this research program is therefore to address this gap by coherently tuning bonding anisotropy and anharmonicity across families of related compounds. Such approaches have revealed new strategies for exploiting structural anisotropy in quasi-1D and 2D bulk materials to obtain tailored functional properties. This project systematically explored the lattice dynamics, phase stability, and transport properties in bulk layered materials by using both composition and applied pressure to tune the degree of bonding anisotropy and anharmonicity. To accomplish this work, we combined i) single-crystal growth of key material systems with tunable anisotropy, ii) in-situ high-temperature/high-pressure characterization of structure and phonons to probe bonding anisotropy and anharmonicity, including state-of-the-art inelastic X-ray scattering (IXS) and inelastic neutron scattering (INS), and iii) first-principles simulations leveraging large-scale computing to identify the fundamental origins of the observed effects, by relating atomic structure and dynamics to electronic orbital interactions. Finally, we modeled and verified the impact of the phonon behavior on thermal transport to identify new strategies for a-priori design of thermal conductivity. Our integrated collaborative approach helped to systematically unravel the effects of anisotropy and bonding anharmonicity on phonon transport, thermodynamics, and thermal properties of complex anisotropic materials.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Elastic Moduli: a Tool for Understanding Chemical Bonding and Thermal Transport in Thermoelectric Materials

Abstract The elastic behavior of a material can be a powerful tool to decipher thermal transport. In thermoelectrics, measuring the elastic moduli—directly tied to sound velocity—is critical to understand trends in lattice thermal conductivity, as well as study bond anharmonicity and phase transitions, given the sensitivity of elastic moduli to the chemical bonding. In this review, we introduce the basics of elasticity and explain the origin of high‐temperature lattice softening from a bonding perspective. We then review elasticity data throughout classes of thermoelectrics, and explore trends in sound velocity, anharmonicity, and thermal conductivity. We reveal how experimental sound velocities can improve the accuracy of common thermal conductivity models and present a critical discussion of Grüneisen parameter estimates from elastic moduli. Readers will be equipped with tools to leverage elasticity measurements or calculations to accurately interpret thermal transport trends.

Isotta, Eleonora↗
DOE OSTI2023

Elastic Moduli: a Tool for Understanding Chemical Bonding and Thermal Transport in Thermoelectric Materials

Abstract The elastic behavior of a material can be a powerful tool to decipher thermal transport. In thermoelectrics, measuring the elastic moduli—directly tied to sound velocity—is critical to understand trends in lattice thermal conductivity, as well as study bond anharmonicity and phase transitions, given the sensitivity of elastic moduli to the chemical bonding. In this review, we introduce the basics of elasticity and explain the origin of high‐temperature lattice softening from a bonding perspective. We then review elasticity data throughout classes of thermoelectrics, and explore trends in sound velocity, anharmonicity, and thermal conductivity. We reveal how experimental sound velocities can improve the accuracy of common thermal conductivity models and present a critical discussion of Grüneisen parameter estimates from elastic moduli. Readers will be equipped with tools to leverage elasticity measurements or calculations to accurately interpret thermal transport trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Sn oxides on the thermal conductivity of polycrystalline SnSe

SnSe is a promising thermoelectric material, with intrinsically low lattice thermal conductivity, κL. Surprisingly, in several reports, polycrystalline samples are found to have a higher thermal conductivity than single crystals. This disparity has been attributed to trace amounts of thermally conductive Sn oxides at the grain boundaries of polycrystalline samples. The same culprit was recently proposed to explain the reduction of κL in purified, oxide-free, SnSe polycrystals. Here, we test this hypothesis by: (i) tuning the type of oxide in SnSe by exploiting thermodynamic stability regions, since Sn-rich or Sn-poor compositions favour the formation of SnO or SnO 2 , respectively; and (ii) varying the quantity of SnO 2 by intentionally oxidizing SnSe powder before consolidation, to obtain samples with quantifiable amounts - up to 15% - of SnO 2 . We find that the κL of SnSe is impervious to changes in the type or the amount of Sn oxide present in the samples. Our results show that a simple “rule of mixtures” cannot be used to estimate the effect of grain boundary oxides on the thermal conductivity of SnSe. These results call for an improved understanding of the intriguing thermal transport mechanisms in SnSe and numerous other systems where a two-phase transport is presumed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Determination of single-crystal elastic moduli of Li RE F 4 ( RE =Y, Gd, and Tb) by resonant ultrasound spectroscopy

The tetragonal fluoro-scheelite Li RE F 4 compounds (RE = rare earth) have been shown to exhibit a variety of useful optical and magnetic properties. While LiYF 4 has been widely studied, many of the fundamental thermodynamic properties of other members of this family remain unknown. Here, we report the complete elastic tensors (C ij ) of single-crystalline LiYF 4 , LiTbF 4 , and LiGdF 4 using resonant ultrasound spectroscopy and density functional theory (DFT). Here we compare the results for LiYF 4 with prior experimental results using time-of-flight ultrasound methods. This is the first report, however, of the experimental elastic tensors of LiTbF 4 and LiGdF 4 . The present results point to a softening of the elastic moduli of the Li RE F 4 system when Y is replaced by the larger ionic radius of Tb or Gd. Furthermore, we find that just 0.3% doping with Nd on the Y site also leads to a slight softening of the moduli. The variation of the elastic moduli as a function of temperature up to 216°C was also measured. A nearly linear softening of all seven independent elastic moduli was observed with increasing temperature. Phonon dispersions and phonon density of states obtained by DFT support the experimental finding of a significantly higher sound velocity due to lighter Y atoms in LiYF 4 , as compared to heavier LiTbF 4 and LiGdF 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anisotropic Structural Collapse of Mg 3 Sb 2 and Mg 3 Bi 2 at High Pressure

Alloys between Mg 3 Sb 2 and Mg 3 Bi 2 have recently been shown to be exceptional thermoelectric materials due in part to their anomalously low thermal conductivity. In the present study, in situ high-pressure synchrotron X-ray diffraction was used to investigate the structure and bonding in Mg 3 Sb 2 and Mg 3 Bi 2 at pressures up to 50 GPa. Our results confirm prior predictions of isotropic in-plane and out-of-plane compressibility but reveal large disparities between the bond strength of the two distinct Mg sites. Using single-crystal diffraction, we show that the octahedral Mg–Sb bonds are significantly more compressible than the tetrahedral Mg–Sb bonds in Mg 3 Sb 2 , which lends support to prior arguments that the weaker octahedral Mg bonds are responsible for the anomalous thermal properties of Mg 3 Sb 2 and Mg 3 Bi 2 . Further, we report the discovery of a displacive and reversible phase transition in both Mg 3 Sb 2 and Mg 3 Bi 2 above 7.8 and 4.0 GPa, respectively. Furthermore, the transition to the high-pressure structure involves a highly anisotropic volume collapse, in which the out-of-plane axis compresses significantly more than the in-plane axes. Single-crystal diffraction at high pressure was used to solve the monoclinic high-pressure structure ( C 2/ m ), which is a distorted variant of the ambient-pressure structure containing four unique Mg coordination environments.

36 MATERIALS SCIENCE↗