Search NASA⌕ Search

Engineering topics

Zhang, Chunyan

Publications and source records attributed to Zhang, Chunyan.

Self‐Templated 3D Sulfide‐Based Solid Composite Electrolyte for Solid‐State Sodium Metal Batteries

Abstract Rechargeable solid‐state sodium metal batteries (SSMBs) experience growing attention owing to the increased energy density (vs Na‐ion batteries) and cost‐effective materials. Inorganic sulfide‐based Na‐ion conductors also possess significant potential as promising solid electrolytes (SEs) in SSMBs. Nevertheless, due to the highly reactive Na metal, poor interface compatibility is the biggest obstacle for inorganic sulfide solid electrolytes such as Na 3 SbS 4 to achieve high performance in SSMBs. To address such electrochemical instability at the interface, new design of sulfide SE nanostructures and interface engineering are highly essential. In this work, a facile and straightforward approach is reported to prepare 3D sulfide‐based solid composite electrolytes (SCEs), which utilize porous Na 3 SbS 4 (NSS) as a self‐templated framework and fill with a phase transition polymer. The 3D structured SCEs display obviously improved interface stability toward Na metal than pristine sulfide. The assembled SSMBs (with TiS 2 or FeS 2 as cathodes) deliver outstanding electrochemical cycling performance. Moreover, the cycling of high‐voltage oxide cathode Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) is also demonstrated in SSMBs using 3D sulfide‐based SCEs. This study presents a novel design on the self‐templated nanostructure of SCEs, paving the way for the advancement of high‐energy sodium metal batteries.

Guo, Xiaolin↗

Core-shell structured tow-pregs enabled additive manufacturing of continuously reinforced thermoset composites

One of the major challenges in thermally curable polymer composite additive manufacturing is the slow curing time of thermally curable resins, coupled with a significant drop in thermoset viscosity upon heating, making the formation of complex shapes difficult. To tackle these issues, we have introduced a novel rapid composite preformation strategy called Tow-Preg Cladding (TPC). This technique involves the use of a thin and rapidly curable dual-cure resin, which combines a thermally curable resin (such as epoxy) with a fast photo-curable resin. The dual-cure resin is applied as a coating over a thermally curable resin tow-preg, enabling the formation of a rigid cladding that supports and shapes the tow-pregs into the desired geometries and patterns. The key advantage of this approach lies in the sequential formation of an interpenetrating polymer network (IPN) at the interlayer between laminates, resulting from the curing of the photocurable resin and the thermally curable resin sequentially. This IPN formation enhances interlaminar bonding in the composite, contributing to its overall strength and performance. The composites produced using this technique exhibited impressive mechanical properties, including longitudinal tensile strength of 1058.2 MPa, longitudinal tensile modulus of 74.2 GPa, flexural strength of 1080.4 MPa, and flexural modulus of 41.7 GPa. Overall, our Tow-Preg Cladding approach shows great promise in overcoming the challenges associated with thermally curable polymer composite additive manufacturing. It offers a viable solution to creating strong, shape-specific thermoset composites efficiently with enhanced mechanical properties.

42 ENGINEERING↗

Carbon Additive Manufacturing with a Near-Replica “Green-to-Brown” Transformation

Nanocomposites containing nanoscale materials offer exciting opportunities to encode nanoscale features into macroscale dimensions, which produces unprecedented impact in material design and application. However, conventional methods cannot process nanocomposites with a high particle loading, as well as nanocomposites with the ability to be tailored at multiple scales. A composite architected mesoscale process strategy that brings particle loading nanoscale materials combined with multiscale features including nanoscale manipulation, mesoscale architecture, and macroscale formation to create spatially programmed nanocomposites with high particle loading and multiscale tailorability is reported. The process features a low-shrinking (<10%) “green-to-brown” transformation, making a near-geometric replica of the 3D design to produce a “brown” part with full nanomaterials to allow further matrix infill. Here, this demonstration includes additively manufactured carbon nanocomposites containing carbon nanotubes (CNTs) and thermoset epoxy, leading to multiscale CNTs tailorability, performance improvement, and 3D complex geometry feasibility. The process can produce nanomaterial-assembled architectures with 3D geometry and multiscale features and can incorporate a wide range of matrix materials, such as polymers, metals, and ceramics, to fabricate nanocomposites for new device structures and applications.

36 MATERIALS SCIENCE↗

High Ion Conductive and Selective Membrane Achieved through Dual Ion Conducting Mechanisms

Conventional ion-selective membranes, that is ion-exchange and porous membranes, are unable to perform high conductivity and selectivity simultaneously due to the contradictions between their ion selecting and conducting mechanisms. Here, in this work, a bifunctional ion-selective layer is developed via the combination of nanoporous boron nitride (PBN) and ion exchange groups from Nafion to achieve high ion conductivity through dual ion conducting mechanisms as well as high ion selectivity. A template-free method is adopted to synthesize flake-like PBN, which is further enmeshed with Nafion resin to form the bifunctional layer coated onto a porous polyetherimide membrane. The double-layer membrane exhibits excellent ion selectivity (1.49 × 10 8 mS cm –3 min), which is 22 times greater than that of the pristine porous polyetherimide membrane, with outstanding ion conductivity (64 mS cm –1 ). In a vanadium flow battery, the double-layer membrane achieves a high Coulombic efficiency of 97% and outstanding energy efficiency of 91% at 40 mA cm –2 with a stable cycling performance for over 700 cycles at 100 mA cm –2 . PBN with ion exchange groups may therefore offer a potential solution to the limitation between ion selectivity and conductivity in ion-selective membranes.

36 MATERIALS SCIENCE↗

Aβ1–42 oligomer induces alteration of tight junction scaffold proteins via RAGE-mediated autophagy in bEnd.3 cells

Compelling evidences have shown that amyloid-β (Aβ) peptide is one of the major pathogenic factors resulting in blood-brain barrier (BBB) disruption in Alzheimer's disease (AD). However, the mechanism underlying BBB breakdown remains elusive. In our present study, we employed murine brain capillary endothelial cells (bEnd.3) as an in vitro BBB model to investigate the role of autophagy in Aβ{sub 1–42} oligo induced BBB disruption. We first identified Aβ{sub 1–42} oligo cytotoxicity to bEnd.3 cells as observed in the reduced cell viability and downregulation of ZO-1, Occludin and Claudin-5. Based on the observation that both downregulated expression of p-mTOR/m-TOR and upregulated ratio of LC3-II/β-actin were induced by Aβ{sub 1–42} oligo, we then applied 3-MA, an inhibitor of autophagy, to test the role of autophagy in Aβ{sub 1–42} oligo induced Tight junction (TJ) proteins damage. Results have shown that 3-MA partially reversed Aβ{sub 1–42} oligo induced downregulation of ZO-1, Occludin and Claudin-5, which was further determined by LC3 siRNA. We also used rapamycin to activate autophagy and found that TJ proteins damage induced by Aβ1–42 was deteriorated even further. Given that the receptor of advanced glycation end-products (RAGE) is a pivotal receptor that mediates Aβ toxicity, RAGE siRNA was utilized to identify the involvement of RAGE in Aβ{sub 1–42} oligo induced autophagy. The results demonstrated a suppressed autophagy with increased p-mTOR/m-TOR and decreased LC3-II/β-actin as well as increased ZO-1, Occludin and Claudin-5 in transfected cells after Aβ{sub 1–42} oligo treatment, as compared to the non-transfected group. In summary, these results suggested that Aβ{sub 1–42} oligo induced TJ proteins disruption via a RAGE-dependent autophagy pathway.

60 APPLIED LIFE SCIENCES↗

Aβ1-42 induces cell damage via RAGE-dependent endoplasmic reticulum stress in bEnd.3 cells

Highlights: • ERS involved in Aβ{sub 1-42}-resulted TJ disruption in endothelial cells. • Activation of ERS by Aβ{sub 1-42} is mediated by RAGE in endothelial cells. • Aβ{sub 1-42} induced endothelial cells damage and TJ disruption though RAGE-dependence ERS. Blood-brain barrier (BBB) breakdown has been determined to play a critical role in the pathogenesis of Alzheimer's disease (AD). However, the underlying mechanisms of BBB disruption in AD remain unclear. Our previous study suggested that the receptor for advanced glycation end-products (RAGE) functioned as a signal transduction receptor in Aβ{sub 1–42}-induced damage in endothelial cells. In our present study, we revealed that RAGE-mediated endoplasmic reticulum stress (ERS) is essential for Aβ-induced endothelial cell damage. Here, we found that Aβ{sub 1–42} activated ERS by upregulation of Grp78, xbp-1 and CHOP in endothelial cells and that Aβ{sub 1–42}-resulted lesions, including the upregulations of caspase-12 and caspase-3, the augment of bax/bcl-2 ratio, and the downregulations of ZO-1 and Occludin in bEnd.3 cells, were ameliorated by the pretreatment of salubrinal, an ERS inhibitor. Furthermore, the expressions of Grp78, xbp-1 and CHOP induced by Aβ{sub 1–42} were blocked by transfection of RAGE small interfering RNA (siRNA), which indicated that Aβ{sub 1–42} activated ERS in a RAGE-dependent manner. Additionally, bEnd.3 cells transfected with RAGE siRNA showed lower expressions of caspase-12 and caspase-3, decreased bax/bcl-2 ratio, and higher expressions of ZO-1 and Occludin following Aβ1-42 treatment, comparing to control cells. In conclusion, our data demonstrated that Aβ{sub 1–42} induced endothelial cells damage via activation of ERS in a RAGE-dependent manner.

60 APPLIED LIFE SCIENCES↗

Molten-NaNH 2 Densified Graphene with In-Plane Nanopores and N-Doping for Compact Capacitive Energy Storage

Capacitive carbons are attractive for energy storage on account of their superior rate and cycling performance over traditional battery materials, but they usually suffer from a far lower volumetric energy density. Starting with expanded graphene, a simple, multifunctional molten sodium amide treatment for the preparation of high-density graphene with high capacitive performance in both aqueous and lithium battery electrolytes is reported. The molten sodium amide can condense the expanded graphene, lead to nitrogen doping and, what is more important, create moderate in-plane nanopores on graphene to serve as ion access shortcuts in dense graphene stacks. Finally, the resulting high-density graphene electrode can deliver a volumetric capacitance of 522 F cm -3 in a potassium hydroxide electrolyte; and in a lithium-ion battery electrolyte, it exhibits a gravimetric and volumetric energy density of 618 W h kg -1 and 740 W h L -1 , respectively, and even outperforms commercial LiFePO 4 .

25 ENERGY STORAGE↗