Search NASA⌕ Search

Engineering topics

Zhang, Delin

Publications and source records attributed to Zhang, Delin.

Multiscale approaches for optimizing the impact of strain on Na-ion battery cycle life

Abstract The high costs and geopolitical challenges inherent to the lithium-ion (Li-ion) battery supply chain have driven a rising interest in the development of sodium-ion (Na-ion) batteries as a potential alternative. Unfortunately, the larger ionic radius of Na limits the reversibility of cycling because of the extensive atomic rearrangements that accompany Na-ion insertion, which in turn limit diffusion and charging speed, and lead to rapid degradation of the electrodes. The Center for Strain Optimization for Renewable Energy (STORE) was established to address these challenges and develop new electrode materials for Na-ion cells. This article discusses the current state-of-the-art materials used in Na-ion cells and several directions that STORE believes are critical to understand and control the structural and volumetric changes during the reversible (de)insertion of large cations. Graphical abstract Highlights Understanding the fundamental way materials respond to localized strains at the atomic length-scale is a critical first step in the development of highly reversible, long cycle life, Na-ion insertion hosts. This perspective explores a variety of methods that can be employed to mitigate the detrimental effects of large strain. The insights gained from these investigations should help lay the foundation for the creation of more economical and sustainable batteries that could have immediate impact on global energy infrastructure. Discussion Although there is near universal agreement that electrochemical energy storage must be an integral part of a green-energy future, there is less agreement about how to reduce the cost of energy storage. Replacing high-cost lithium-ion cells with lower-cost sodium-ion batteries is one option frequently considered in future energy models, but the details of what can be achieve with optimized sodium cell performance remains unclear. Here we posit that developing methods to mitigating strain on the electrode particle length scale is a key factor for achieving long-cycle-life sodium-ion batteries. Mitigating strain on the atomic scale suppress electrode-level volume change. Allowing for fast cycling in materials without the problems of electrode cracking or delamination. We further posit that understanding volume change in sodium-ion electrodes at a fundamental level will lead to the designing new sodium-ion electrode materials that will allow for efficient, stable, lower-cost energy storage.

Brady, Michael J.↗

Iron-rich permanent magnet

The disclosure is directed to an iron-nitride material having a polycrystalline microstructure including a plurality of elongated crystallographic grains with grain boundaries, the iron-nitride material including at least one of an α″-Fe16N2 phase and a body-center-tetragonal (bct) phase comprising Fe and N. The disclosure is also directed a method producing an iron-nitride material. The method includes some combinations of preparing a raw material comprising iron, carrying out a microstructure build-up by annealing the prepared raw material at an elevated temperature and subsequently quenching the prepared raw material to produce a microstructure build-up material, annealing the microstructure build-up material, reducing the microstructure build-up material in a hydrogen environment, nitriding the reduced material to produce a nitrided material and subsequently quenching the nitrided material to a martensitic transformation temperature, stress annealing the nitrided material, and magnetic field annealing the stress-annealed material.

Wang, Jian-Ping↗

Designing shape-memory-like microstructures in intercalation materials

During the reversible insertion of ions, lattices in intercalation materials undergo structural transformations. These lattice transformations generate misfit strains and volume changes that, in turn, contribute to the structural decay of intercalation materials and limit their reversible cycling. In this paper, we draw on insights from shape-memory alloys, another class of phase transformation materials, that also undergo large lattice transformations but do so with negligible macroscopic volume changes and internal stresses. We develop a theoretical framework to predict structural transformations in intercalation compounds and identify crystallographic design rules necessary for forming shape-memory-like microstructures in intercalation materials. We use our approach to systematically screen open-source structural databases comprising $n$ > 5000 pairs of intercalation compounds. We identify candidate compounds, such as Li x Mn 2 O 4 (Spinel), Li x Ti 2 (PO 4 ) 3 (NASICON), that approximately satisfy the crystallographic design rules and can be precisely doped to form shape-memory-like microstructures. Throughout, we compare our analytical results with experimental measurements of intercalation compounds. We find a direct correlation between structural transformations, microstructures, and increased capacity retention in these materials. These results, more generally, show that crystallographic designing of intercalation materials could be a novel route to discovering compounds that do not decay with continuous usage.

36 MATERIALS SCIENCE↗

Impact of Hot Bending on the High-Temperature Performance and Hydrogen Damage of 2.25Cr-1Mo-0.25V Steel

The impact of hot bending forming process on the high-temperature mechanical properties and hydrogen damage of 2.25Cr-1Mo-0.25V steel was investigated by scanning electron microscope (SEM), transmission electron microscope (TEM), energy-dispersive spectrum (EDS) and the slow strain rate tensile (SSRT) test in high-temperature hydrogen environment. The samples containing hot bending residual influence were extracted from a real hydrogenation reactor shell fabricated through hot bending–welding process. SEM images of the material demonstrated that the density and size of carbides in 2.25Cr-1Mo-0.25V increased after forming. TEM and EDS results revealed that ferrite matrix of the formed material was purified. The mechanical properties measured by SSRT test manifested that 2.25Cr-1Mo-0.25V was softened after forming. Moreover, it was observed that high-temperature hydrogen environment embrittled the material and the susceptibility to hydrogen damage increased after forming. The role of hot bending process on the evolution of mechanical properties and hydrogen damage susceptibility was discussed. Possible mechanism for the impact of hot bending process on the high-temperature hydrogen damage was proposed.

36 MATERIALS SCIENCE↗

High spin polarization in epitaxial Fe 4 N thin films using Cr and Ag as buffer layers

Fe 4 N thin films with (001) texture were prepared by reactive sputtering on MgO substrates, utilizing either a Cr or Ag buffer layer to facilitate the epitaxial growth. X-ray diffraction, atomic force microscopy, and vibrating sample magnetometry measurements show that the Fe 4 N thin film grown on the Ag buffer layer is superior to that grown on the Cr buffer layer. The point contact Andreev reflection measurement was then conducted, and the spin polarizations were determined to be 61.1% and 81.3% for Fe 4 N thin films with Cr and Ag buffer layers, respectively. The 81.3% spin polarization is significantly higher than the ratio reported previously for Fe 4 N and is comparable with that of state-of-the-art Heusler alloys. This result is in agreement with the theoretical prediction on the discrepancy between the two differently defined spin polarizations for Fe 4 N. Moreover, our study indicates that an optimized growth process for Fe 4 N thin films is crucial for achieving a high spin polarization and that true half-metallicity could potentially be realized with Fe 4 N. Furthermore the high spin polarization of Fe 4 N combined with its low fabrication temperature and simple composition makes Fe 4 N a competitive candidate to be a half-metallic ferromagnet in spintronic devices.

36 MATERIALS SCIENCE↗

Planar Hall effect based characterization of spin orbital torques in Ta/CoFeB/MgO structures

The spin orbital torques in Ta/CoFeB/MgO structures are experimentally investigated utilizing the planar Hall effect and magnetoresistance measurement. By angular field characterization of the planar Hall resistance at ±current, the differential resistance which is directly related to the spin orbital torques is derived. Upon curve fitting of the analytical formulas over the experimental results, it is found that the anti-damping torque, also known as spin Hall effect, is sizable while a negligible field-like torque is observed. A spin Hall angle of about 18 ± 0.6% is obtained for the Ta layer. Temperature dependent study of the spin orbital torques is also performed. It is found that temperature does not significantly modify the spin Hall angle. By cooling down the sample down to 100 K, the obtained spin Hall angle has a maximum value of about 20.5 ± 0.43%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗