Search NASA⌕ Search

Engineering topics

Zhang, Dongzhou

Publications and source records attributed to Zhang, Dongzhou.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Investigation of the High-Pressure Behaviors of Amblygonite by Single-Crystal X-ray Diffraction, Raman Spectroscopy, and DFT Calculations

In the present study, we extensively explored the high-pressure behaviors and vibrational properties of amblygonite LiAlPO 4 F with elevated pressures up to 34.3 GPa based on single-crystal X-ray diffraction measurements, Raman spectroscopy, and DFT calculations. The compressibility and elastic properties of amblygonite were determined first. Specifically, the obtained isothermal bulk modulus of LiAlPO 4 F is 128(4) GPa and the triclinic phase exhibited anisotropic compression with axial compressibility β c > β a > β b with a ratio of 1.11:1.00:1.20. The Raman spectra showed no indication of phase transformation and were used to obtained mode Grüneisen parameters. The average Grüneisen parameter for PO 4 tetrahedral sites was smaller than for the LiO 4 F sites. Our results provide new insights into the phase stability and elastic properties of lithium-fluorite granites at extreme conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero‐Dimensional [(C 6 H 5 ) 4 P] 2 SbCl 5 Enabled by Pressure‐Induced Lone Pair‐π Interaction

Abstract Low‐dimensional (low‐D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low‐D OMHHs, especially the zero‐D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near‐unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure‐induced electronic coupling between the lone‐pair electrons of Sb 3+ and the π electrons of benzene ring (lp‐π interaction) serves as an unexpected “bridge” for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp‐π interactions in organic–inorganic hybrid systems.

Luo, Hui↗
DOE OSTI2023

Thermal equation of state of ice-VII revisited by single-crystal X-ray diffraction

Abstract Ice-VII is a high-pressure polymorph of H2O ice and an important mineral widely present in many planetary environments, such as in the interiors of large icy planetary bodies, within some cold subducted slabs, and in diamonds of deep origin as mineral inclusions. However, its stability at high pressures and high temperatures and thermoelastic properties are still under debate. In this study, we synthesized ice-VII single crystals in externally heated diamond-anvil cells and conducted single-crystal X-ray diffraction experiments up to 78 GPa and 1000 K to revisit the high-pressure and high-temperature phase stability and thermoelastic properties of ice-VII. No obvious unit-cell volume discontinuity or strain anomaly of the high-pressure ice was observed up to the highest achieved pressures and temperatures. The volume-pressure-temperature data were fitted to a high-temperature Birch-Murnaghan equation of state formalism, yielding bulk modulus KT0 = 21.0(4) GPa, its first pressure derivative KT0′ = 4.45(6), dK/dT = –0.009(4) GPa/K, and thermal expansion relation αT = 15(5) × 10–5 + 15(8) × 10–8 × (T – 300) K–1. The determined phase stability and thermoelastic properties of ice-VII can be used to model the inner structure of icy cosmic bodies. Combined with the thermoelastic properties of diamonds, we can reconstruct the isomeke P-T paths of ice-VII inclusions in diamond from depth, offering clues on the water-rich regions in Earth’s deep mantle and the formation environments of those diamonds.

Geochemistry & Geophysics↗
DOE OSTI2023

Structure evolution of Bi 4 O 7 under high pressure

X-ray diffraction and Raman spectroscopy measurements were used to study the structure evolution of Bi 4 O 7 during compression. Two isostructural phase transitions were observed under high pressure, with the first transition to phase II occurring at approximately 3.0 (2) GPa and the second to phase III occurring at approximately 13.0 (5) GPa. The pressure–volume ( P – V ) curve was found to be discontinuous at those two pressure transition boundaries. By fitting the P – V curves in three different stages, the bulk moduli were estimated to be approximately 101 (2), 68 (2) and 172 (3) GPa. Such large differences in the bulk moduli confirm two isostructural phase changes in the three stages. An irreversible amorphization process was found to start at approximately 20 (1) GPa, and the sample gradually becomes fully amorphous during compression at 30 (1) GPa.

Chemistry↗
DOE OSTI2023

Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero-Dimensional [(C 6 H 5 ) 4 P] 2 SbCl 5 Enabled by Pressure-Induced Lone Pair-π Interaction

Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb 3+ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected “bridge” for the charge transfer. Further, our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic–inorganic hybrid systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Evolution of magnetism, valence, and crystal lattice in EuCd 2 As 2 under pressure

EuCd 2 As 2 has been proposed to be one of the ideal platforms as an intrinsic topological magnetic system, potentially hosting a single pair of Weyl points when it is tuned into the ferromagnetic state with spins aligned out of plane by either external pressure or chemical doping. To investigate the possible realization of an ideal topological state, we have systematically investigated pressure control of the magnetic state, valence, and crystal structure using synchrotron-based time-domain Mössbauer spectroscopy, x-ray absorption spectroscopy, and powder x-ray diffraction. Our experimental results show that the magnetic configuration remains mostly in plane under pressure up to 42.8 GPa and pressure effectively enhances the magnetic ordering temperature. Meanwhile, Eu ions remain divalent when subjected to pressure up to 35.9 GPa, and the trigonal crystal lattice is maintained up to 34.6 GPa. Our work provides valuable experimental data to benchmark future theoretical studies in magnetic topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Early crystallization of amorphous selenium under high pressure studied by synchrotron XRD method

Abstract The amorphous selenium (a-Se) was studied via x-ray diffraction (XRD) under pressures ranging from ambient pressure up to 30 GPa at room temperature to study its high-pressure behavior. Two compressional experiments on a-Se samples, with and without heat treatment, respectively, were conducted. Contrary to the previous reports that a-Se crystallized abruptly at around 12 GPa, in this work we report an early partially crystallized state at 4.9 GPa before completing the crystallization at around 9.5 GPa based on in-situ high pressure XRD measurements on the a-Se with 70 °C heat treatment. In comparison, crystallization pressure on another a-Se sample without thermal treatment history was observed to be 12.7 GPa, consistent with the previously reported crystallization pressure. Thus, it is proposed in this work that prior heat treatment of a-Se can result in an earlier crystallization under high pressure, which helps to understand the possible mechanism caused by the previous controversial reports on pressure induced crystallization behavior in a-Se.

Physics↗
DOE OSTI2023

Single-crystal X-ray diffraction of fluorapatite to 61 GPa

Apatite is a mineral of widespread importance in Earth and planetary science. Here we examine the behavior of a natural fluorapatite (FAp) crystal from Durango (Mexico) under compression to 61 GPa. Single-crystal X-ray diffraction experiments were carried out in a diamond-anvil cell using a synchrotron source. The apatite structure persists up to 32.4 GPa. Birch-Murnaghan equation of state parameters were fit to the pressure-volume data for fluorapatite for two cases: fixing V 0 at its measured ambient value resulted in a bulk modulus, K 0T , of 97.0(8) GPa and a pressure derivative of the bulk modulus, K' 0T , of 3.3(1), while fixing V 0 and K 0T at its ambient value 90.5 GPa (derived from ultrasonically measured elastic constants) resulted in a K' 0T value of 4.1(1). At 35.6 GPa, fluorapatite transforms to a triclinic phase (P$\bar{1}$, Z = 4), designated here as fluorapatite II (FAp-II). This phase persists up to at least 61 GPa. The major structural differences between FAp and FAp-II involve the buckling of the Ca polyhedra along the c-axis and changes in the number and coordination of the Ca sites. Furthermore, our study extends the pressure range over which fluorapatite has been examined by more than a factor of three, providing new insights into its structural response to high-pressure conditions.

58 GEOSCIENCES↗
DOE OSTI2023

Dual origin of ferropericlase inclusions within super-deep diamonds

Ferropericlase [(Mg,Fe)O] is one of the major constituents of Earth's lower mantle and the most abundant mineral inclusion in sub-lithospheric diamonds. Although a lower mantle origin for ferropericlase inclusions has often been suggested, some studies have proposed that many of these inclusions may instead form at much shallower depths, in the deep upper mantle or transition zone. No straightforward method exists to discriminate ferropericlase of lower-mantle origin without characteristic mineral associations, such as co-existing former bridgmanite. To explore ferropericlase-diamond growth relationships, we have investigated the crystallographic orientation relationships (CORs), determined by single-crystal X-ray diffraction, between 57 ferropericlase inclusions and 37 diamonds from Juina (Brazil) and Kankan (Guinea). We show that ferropericlase inclusions can develop specific (16 inclusions in 12 diamonds), rotational statistical (9 inclusions in 7 diamonds) and random (32 inclusions in 25 diamond) CORs with respect to their diamond hosts. All measured inclusions showing a specific COR were found to be Fe-rich (X FeO > 0.30). Coexistence of non-randomly and randomly oriented ferropericlase inclusions within the same diamond indicates that their CORs may be variably affected by local growth conditions. However, the occurrence of specific CORs only for Fe-rich inclusions indicates that Fe-rich ferropericlases have a distinct genesis and are syngenetic with their host diamonds. In conclusion, this result provides strong support for a dual origin for ferropericlase in Earth's mantle, with Fe-rich compositions likely indicating redox growth in the upper mantle, while more Mg-rich compositions with random COR mostly representing ambient lower mantle trapped as protogenetic inclusions.

58 GEOSCIENCES↗
DOE OSTI2023

Synthesis and Post-Processing of Chemically Homogeneous Nanothreads from 2,5-Furandicarboxylic Acid

Compared with conventional, solution-phase approaches, solid-state reaction methods can provide unique access to novel synthetic targets. Nanothreads—one-dimensional diamondoid polymers formed through the compression of small molecules—represent a new class of materials produced via solid-state reactions, however, the formation of chemically homogeneous products with targeted functionalization represents a persistent challenge. Through careful consideration of molecular precursor stacking geometry and functionalization, we report here the scalable synthesis of chemically homogeneous, functionalized nanothreads through the solid-state polymerization of 2,5-furandicarboxylic acid. The resulting product possesses high-density, pendant carboxyl functionalization along both sides of the backbone, enabling new opportunities for the post-synthetic processing and chemical modification of nanothread materials applicable to a broad range of potential applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Pressure-induced charge orders and their postulated coupling to magnetism in hexagonal multiferroic LuFe 2 O 4

Hexagonal LuFe 2 O 4 is a promising charge order (CO) driven multiferroic material with high charge and spin-ordering temperatures. The coexisting charge and spin orders on Fe 3+ /Fe 2+ sites result in magnetoelectric behaviors, but the coupling mechanism between the charge and spin orders remains elusive. Here, by tuning external pressure, we reveal three charge-ordered phases with suggested correlation to magnetic orders in LuFe 2 O 4 : (i) a centrosymmetric incommensurate three-dimensional CO with ferrimagnetism, (ii) a non-centrosymmetric incommensurate quasi-two-dimensional CO with ferrimagnetism, and (iii) a centrosymmetric commensurate CO with antiferromagnetism. Experimental in situ single-crystal X-ray diffraction and X-ray magnetic circular dichroism measurements combined with density functional theory calculations suggest that the charge density redistribution caused by pressure-induced compression in the frustrated double-layer [Fe 2 O 4 ] cluster is responsible for the correlated spin-charge phase transitions. The pressure-enhanced effective Coulomb interactions among Fe-Fe bonds drive the frustrated (1/3, 1/3) CO to a less frustrated (1/4, 1/4) CO, which induces the ferrimagnetic to antiferromagnetic transition. Our results not only elucidate the coupling mechanism among charge, spin, and lattice degrees of freedom in LuFe 2 O 4 , but also provide a new way to tune the spin-charge orders in a highly controlled manner.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Calcium dissolution in bridgmanite in the Earth’s deep mantle

Accurate knowledge of the mineralogy is essential for understanding the lower mantle, which represents more than half of Earth'svolume. CaSiO 3 perovskite is believed to be the third-most-abundant mineral throughout the lower mantle, following bridgmanite and ferropericlase. Here we experimentally show that the calcium solubility in bridgmanite increases steeply at about 2,300 kelvin and above 40 gigapascals to a level sufficient for a complete dissolution of all CaSiO 3 component in pyrolite into bridgmanite, resulting in the disappearance of CaSiO 3 perovskite at depths greater than about 1,800 kilometres along the geotherm. Hence we propose a change from a two-perovskite domain (TPD; bridgmanite plus CaSiO 3 perovskite) at the shallower lower mantle to a single-perovskite domain (SPD; calcium-rich bridgmanite) at the deeper lower mantle. Iron seems to have a key role in increasing the calcium solubility in bridgmanite. The temperature-driven nature can cause large lateral variations in the depth of the TPD-to-SPD change in response to temperature variations (by more than 500 kilometres). Furthermore, the SPD should have been thicker in the past when the mantle was warmer. Our finding requires revision of the deep-mantle mineralogy models and will have an impact on our understanding of the composition, structure, dynamics and evolution of the region.

58 GEOSCIENCES↗
DOE OSTI2022

Pressure Engineering Promising Transparent Oxides with Large Conductivity Enhancement and Strong Thermal Stability

Abstract Transparent conducting oxides (TCO) with high electrical conductivity and high visible light transparency are desired for a wide range of high‐impact engineering. Yet, usually, a compromise must be made between conductivity and transparency, limiting the practical application of a TCO to the next level. Furthermore, TCO performance is highly sensitive to composition, so conventional synthesis methods, such as chemical doping, cannot unravel the mysteries of the quantitative structure–performance relationship. Thus, improving the fundamental understanding or creating materials‐by‐design has limited success. Here, a strategy is proposed to modulate the lattice and electronic and optical properties precisely by applying pressure on a TCO. Strikingly, after compression–decompression treatment on the indium titanium oxides (ITiO), a highly transparent and metastable phase with two orders of magnitude enhancement in conductivity is synthesized from an irreversible phase transition. Moreover, this phase possesses previously unattainable filter efficiency on hazardous blue light up to 600 °C, providing potential for healthcare‐related applications with strong thermal stability up to 200 °C. These results demonstrate that pressure engineering is a clean and effective tool for tailoring functional materials that are not achievable by other means, providing an exciting alternative property‐tuning dimension in materials science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermal equation of state for zoisite: Implications for the transportation of water into the upper mantle and the high-velocity anomaly in the Farallon plate

Seismic tomography studies have revealed a high-velocity anomaly at depths between 100 km and 300 km in the Farallon plate. However, the reasons for the high-velocity anomaly continue to be debated. An analysis of the mineral proportions of eclogites exhumed from the Farallon plate shows that the average amount of zoisite in eclogite is ∼16.0 vol%. Therefore, the presence of zoisite eclogite needs to be considered to explain the high-velocity anomaly of the Farallon plate. However, the thermal equation of state and stability of zoisite have not been fully investigated under high pressure−temperature (P-T) conditions. We investigated the high-pressure and high-temperature behavior of natural zoisite utilizing synchrotron single crystal-X-ray diffraction (XRD). The results indicate that zoisite is metastable up to 24.8 GPa and 700 K. We obtained the ambient unit-cell volume V0 = 901.26(3) Å3 by synchrotron single crystal-XRD measurement. We also fitted the pressure-volume-temperature data to a high-temperature Birch-Murnaghan equation of state and obtained the zero-pressure bulk modulus K0 = 134.7(8) GPa, the temperature derivative of the bulk modulus (∂K/∂T)P = −0.011(4) GPa/K, and the thermal expansion coefficients α0V = 1.9(7) × 10−5 K−1 and α1V = 3(2) × 10−8 K−2 when the pressure derivative of bulk modulus (K′0) is fixed at 4. By incorporating the results from previous studies, we calculated the density and bulk sound velocity profiles of zoisite eclogite along the Farallon plate geotherm. Finally, we infer that zoisite could carry water to depths of ∼300 km within cold subducting slabs and that the bulk sound velocity of typical zoisite eclogite with ∼61.0 vol% omphacite, ∼23.0 vol% garnet, and ∼16.0 vol% zoisite could cause the high-velocity anomalies at depths of 100−300 km in the Farallon plate.

Geology↗
DOE OSTI2022

High‐Pressure and High‐Temperature Single‐Crystal Elasticity of Cr‐Pyrope: Implications for the Density and Seismic Velocity of Subcontinental Lithospheric Mantle

Abstract Single‐crystal X‐ray diffraction and Brillouin spectroscopy experiments were performed on a natural Cr‐pyrope (Prp 71.0 Alm 12.6 Sps 0.7 Grs 3.5 Uvr 12.2 ) at high pressure and high temperature up to 11.0 GPa and 800 K. Fitting the collected data to the third‐order finite strain equation yields bulk modulus ( K S 0 ), shear modulus ( G 0 ), their pressure ((∂ K S /∂ P ) T and (∂ G /∂ P ) T ) and temperature (( ∂K S /∂T ) P and ( ∂G/∂T ) P ) derivatives, K S 0 = 167.7(8) GPa, G 0 = 91.5(5) GPa, (∂ K S /∂ P ) T = 4.3(1), (∂ G /∂ P ) T = 1.4(1), ( ∂K S /∂T ) P = − 0.0175(1) GPa/K and ( ∂G/∂T ) P = − 0.0073(1) GPa/K. Using the obtained results, we examined whether the elastic properties of the Cr‐pyrope can be accurately calculated from those of endmembers including pyrope, almandine, grossular, and uvarovite assuming a linear relationship between elastic properties and composition (end‐member model). The results indicate that the end‐member model provides a sufficient approximation for the elastic properties of Cr‐pyrope in calculating the density and velocity of the subcontinental lithospheric mantle (SCLM). We modeled the densities and velocities of three typical types of SCLM (Archon, Proton, and Tecton) in order to investigate how the variation of chemical composition influences the SCLM. We obtained that the compositional change from the Archon to the Tecton increases the density of the SCLM significantly, which can be an important prerequisite for SCLM delamination. However, the compositional variation only slightly changes the velocity of the SCLM and the change is within the uncertainty of the calculation. Moreover, in comparison to the velocity, ρ / V P and ρ / V S are much more sensitive to the compositional change of the SCLM.

Xu, Jingui↗