Search NASA⌕ Search

Engineering topics

Zhang, Duo

Publications and source records attributed to Zhang, Duo.

26 records · Page 2

Lithiophilic 3D Porous CuZn Current Collector for Stable Lithium Metal Batteries

Lithium (Li) dendrites formed from nonuniform Li deposition limit potential uses of Li metal as an anode material. Here, we report a lithiophilic 3D porous CuZn current collector that mitigates dendrite formation and realizes the high stability of Li anodes. As opposed to the common metal current collector of copper (Cu), calculations and in situ experiments demonstrate that copper zinc (CuZn) alloys found in commercially available brass are lithiophilic and promote uniform Li deposition. Facile dealloying methods are applied to provide sufficient Li deposition and volume expansion space in brass sheets. Residual CuZn alloys in the framework are found to induce uniform Li deposition and stabilize Li dendrite growth. The optimal current collector (2h-3D CuZn) runs smoothly over 220 cycles at 0.5 mA cm –2 with improved Coulombic efficiencies at high current density. Lastly, this demonstrates an economic and facile CuZn preparation method that unlocks the full potential of Li anodes and provides new Li battery stabilization approaches.

25 ENERGY STORAGE↗

Ettringite-Related Dimensional Stability of CO 2 -Cured Portland Cement Mortars

Carbonation curing, where cement is cured in a CO 2 -rich environment, is an emerging technology in the precast industry that promotes CO 2 sequestration in construction materials. It demonstrates good promise for enhancing material strength development, chemical resistance and manufacturing sustainability. A critically important but little studied aspect of carbonation curing is the dimensional stability of the cured materials, which poses a significant impact on longevity of cement-based materials and structures. In this study, we propose to use carbonation curing to substitute the conventional energy-intensive steam curing and time-consuming moisture curing, and examine the dimensional stability of Portland cement mortars manufactured by different curing approaches. The common pathology in precast concrete that potentially creates undesirable expansions, known as Delayed Ettringite Formation (DEF), is particularly investigated. Four curing approaches were examined including moist, steam (maximum temperature at 85°C to purposefully induce DEF), combined steam-carbonation, and carbonation curing in which steam curing was used to verify favorable cement chemistry for DEF and to indicate DEF onset timing. It was found that, among the four curing approaches designed in this study, the carbonation-cured mortars demonstrated the lowest expansion (~0%) whereas the steam-cured mortars showed the highest (>0.6%) after 500 days of storage in saturated limewater. Mortar expansion after the combined steam-carbonation curing (~0.1%) was lower than that of steam curing, but remained higher with respect to the moisture-cured reference. Here, the mineral ettringite was detected at 500 days after all curing approaches. However, larger ettringite crystal size (5-10 μm) with greater dispersion was observed via scanning electron microscopy after steam curing in reference to carbonation curing (< 5 μm). Additionally, the calcium carbonate precipitated by CO 2 carbonation was found to participate in the post-carbonation hydration to promote formation of monocarboaluminate and hemicarboaluminate, which stabilize ettringite and potentially lead to a secondary densification of the mortar microstructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic Field-Suppressed Lithium Dendrite Growth for Stable Lithium-Metal Batteries

Lithium metal is the most attractive anode material due to its extremely high specific capacity, minimum potential, and low density. However, uncontrollable growth of lithium dendrite results in severe safety and cycling stability concerns, which hinders the application in next generation secondary batteries. In this paper, a new and facile method imposing a magnetic field to lithium metal anodes is proposed. That is, the lithium ions suffering Lorentz force due to the electromagnetic fields are put into spiral motion causing magnetohydrodynamics (MHD) effect. This MHD effect can effectively promote mass transfer and uniform distribution of lithium ions to suppress the dendrite growth as well as obtain uniform and compact lithium deposition. The results show that the lithium metal electrodes within the magnetic field exhibit excellent cycling and rate performance in a symmetrical battery. Additionally, full batteries using limited lithium metal as anodes and commercial LiFePO 4 as cathodes show improved performance within the magnetic field. In summary, a new and facile strategy of suppressing lithium dendrites using the MHD effect by imposing a magnetic field is proposed, which may be generalized to other advanced alkali metal batteries.

25 ENERGY STORAGE↗

Optimal Pre-hydration Age for CO 2 Sequestration through Portland Cement Carbonation

An emerging technology of CO 2 sequestration in Portland cement (PC) is through accelerated carbonation, where PC is intentionally carbonated at early hydration age and reinitiates long-term hydration upon completion of carbonation. However, the current literature has overlooked a fact that different PC hydration ages prior to carbonation (pre-hydration) could lead to distinct carbonation efficiencies and subsequent hydration behaviors (post-hydration). Here, we examine the effects of length of pre-hydration period on CO 2 uptake and on the hydration extent and final strength at 28 days. The CO 2 and H 2 O profiles in the carbonated PC were examined with thermogravimetric analysis/derivative thermogravimetric analysis. The pre-hydration path was traced with isothermal calorimetry. Experimental results suggested that extension of pre-hydration decreased CO 2 uptake, but enhanced the extent of PC hydration at 28 days. It was found that a pre-hydration beyond the late deceleration period of PC hydration (where heat generation is slowing down) led to a higher hydrate content of cement paste, hence forming a higher compressive strength of mortar compared to the noncarbonated benchmarks at 28 days. The lesser carbonation-induced water loss and the nucleation seeding enabled by calcium carbonate are likely responsible for this effect. Furthermore, the finding reported here should be useful for fine tuning PC carbonation process for CO 2 sequestration in concrete.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

99 TcO 4 - remediation by a cationic polymeric network

Direct removal of 99 TcO 4 - from the highly acidic solution of used nuclear fuel is highly beneficial for the recovery of uranium and plutonium and more importantly aids in the elimination of 99 Tc discharge into the environment. However, this task represents a huge challenge given the combined extreme conditions of super acidity, high ionic strength, and strong radiation field. Here in this paper we overcome this challenge using a cationic polymeric network with significant TcO 4 - uptake capabilities in four aspects: the fastest sorption kinetics, the highest sorption capacity, the most promising uptake performance from highly acidic solutions, and excellent radiation-resistance and hydrolytic stability among all anion sorbent materials reported. In addition, this material is fully recyclable for multiple sorption/desorption trials, making it extremely attractive for waste partitioning and emergency remediation. The excellent TcO 4 - uptake capability is elucidated by X-ray absorption spectroscopy, solidstate NMR measurement, and density functional theory analysis on anion coordination and bonding.

36 MATERIALS SCIENCE↗