Search NASA⌕ Search

Engineering topics

Zhang, Hao

Publications and source records attributed to Zhang, Hao.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sunny.jl

Sunny is a Julia package designed to serve the needs of the quantum magnetism community. It supports the specification of a very broad class of spin models and a diverse suite of numerical solvers. These include powerful methods for simulating spin dynamics both in and out of equilibrium. Uniquely, it features a broad generalization of classical and semiclassical approaches to SU(N) coherent states, which is useful for studying systems exhibiting strong spin-orbit coupling or local entanglement effects. Sunny also offers a well-developed framework for calculating the dynamical spin structure factor, enabling direct comparison with scattering experiments. Ease of use is a priority, with tools for symmetry-guided modeling and interactive visualization.

Dahlbom, David↗
DOE OSTI2024

Kernel polynomial method for linear spin wave theory

Calculating dynamical spin correlations is essential for matching model magnetic exchange Hamiltonians to momentum-resolved spectroscopic measurements. A major numerical bottleneck is the diagonalization of the dynamical matrix, especially in systems with large magnetic unit cells, such as those with incommensurate magnetic structures or quenched disorder. In this paper, we demonstrate an efficient scheme based on the kernel polynomial method for calculating dynamical correlations of relevance to inelastic neutron scattering experiments. This method reduces the scaling of numerical cost from cubic to linear in the magnetic unit cell size.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Optimizing spectral phase transfer in four-wave mixing with gas-filled capillaries

Four-wave mixing (FWM) in gas-filled hollow-core capillaries, a nonlinear optical process that mixes signal and pump photon frequencies to generate idler frequency photons, offers a method for precise spectral phase transfer from signal to idler at ultrashort timescales and extreme powers. However, this regime is challenged by competing linear and nonlinear dynamics, leading to significant trade-offs between spectral phase transfer and conversion efficiency. Our computational investigation focuses on the upconversion of femtosecond pulses from the infrared (IR) to the ultraviolet (UV), a range notoriously difficult to manipulate. We explore an intermediate energy regime that strikes an optimal balance between FWM-mediated phase-transfer fidelity and nonlinear conversion efficiency. By adjusting the energy ratios and spectral phase profiles of the input signal, we achieve conversion efficiencies of approximately 5-15% while maintaining an effective quasi-linear spectral phase transfer. These findings will contribute to establishing first-principles and scaling laws essential for applications such as high-precision imaging, spectroscopy, quantum transduction, and distributed entangled interconnects, facilitating advanced control of ultrafast photonic and electronic wavepackets in quantum materials with unprecedented spatial and temporal precision.

Zhang, Hao↗
DOE OSTI2024

Multipolar Skyrmion Crystals in Non-Kramers Doublet Systems

Here, we study the Kondo lattice model of multipolar magnetic moments interacting with conduction electrons on a triangular lattice. Bond-dependent electron hoppings induce a compasslike anisotropy in the effective Ruderman-Kittel-Kasuya-Yosida interaction between multipolar moments. This unique anisotropy stabilizes multipolar skyrmion crystals at zero magnetic field. In a unit cell, the skyrmion fractionalizes into meron composites subject to the conservation of total topological charge. Diverse multipolar phases in the phase diagram give rise to novel spontaneous Hall response of conduction electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Two-dimensional perovskite templates for durable, efficient formamidinium perovskite solar cells

We present a design strategy for fabricating ultrastable phase-pure films of formamidinium lead iodide (FAPbI 3 ) by lattice templating using specific two-dimensional (2D) perovskites with FA as the cage cation. When a pure FAPbI 3 precursor solution is brought in contact with the 2D perovskite, the black phase forms preferentially at 100°C, much lower than the standard FAPbI 3 annealing temperature of 150°C. X-ray diffraction and optical spectroscopy suggest that the resulting FAPbI 3 film compresses slightly to acquire the (011) interplanar distances of the 2D perovskite seed. The 2D-templated bulk FAPbI 3 films exhibited an efficiency of 24.1% in a p-i-n architecture with 0.5–square centimeter active area and an exceptional durability, retaining 97% of their initial efficiency after 1000 hours under 85°C and maximum power point tracking.

14 SOLAR ENERGY↗
DOE OSTI2024

Cubic double perovskites host noncoplanar spin textures

Magnetic materials with noncoplanar magnetic structures can show unusual physical properties driven by nontrivial topology. Topologically-active states are often multi-q structures, which are challenging to stabilize in models and to identify in materials. Here, we use inelastic neutron-scattering experiments to show that the insulating double perovskites Ba 2 YRuO 6 and Ba 2 LuRuO 6 host a noncoplanar 3-q structure on the face-centered cubic lattice. Quantitative analysis of our neutron-scattering data reveals that these 3-q states are stabilized by biquadratic interactions. Our study identifies double perovskites as a highly promising class of materials to realize topological magnetism, elucidates the stabilization mechanism of the 3-q state in these materials, and establishes neutron spectroscopy on powder samples as a valuable technique to distinguish multi-q from single-q states, facilitating the discovery of topologically-nontrivial magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

High-Ni cathodes are being intensely pursued worldwide for electric vehicles and other energy-dense applications due to their high capacity and low cost. However, structural instabilities during electrochemical cycling and when subjected to thermal treatment have been the major issues hindering their practical deployment. We here report a rational design of coating-integrated-into-synthesis protocol for fabricating surface Ti-enriched LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811#Ti) material. The coating to intermediates is crucial to obtain high structural ordering, both in the bulk and surface of high-Ni cathodes, and the Ti substitute has a unique tri-valence (Ti 3+ ) in a gradient surface distribution. Further, the simulations of projected density of states in the atomistic understanding further certify significantly enhanced stability of lattice oxygen for the NMC811 through such a Ti 3+ -based structure reinforcement. Consequently, the NMC811#Ti cathode delivers a high capacity up to 200mAhg -1 at 0.1 C, along with superior stabilities during air-storage and thermal treatment (up to 297°C at the fully charged state under differential scanning calorimetric measurements). The corresponding NMC811#Ti||graphite full cell exhibits a desired 83.6% capacity retention after 1000 cycles at 0.5 C in a voltage range of 2.8–4.3V. This work demonstrates a delicate surface reinforcement to stabilize high-Ni cathodes for long-life and safe lithium-ion batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nonlinear magnons and exchange Hamiltonians of the delafossite proximate quantum spin liquid candidates KYbSe 2 and NaYbSe 2

Quantum spin liquids (QSLs) are theoretical states of matter with long-range entanglement and exotic quasiparticles. However, they generally elude quantitative theory, rendering their underlying phases mysterious and hampering efforts to identify experimental QSL states. Here we study triangular-lattice resonating-valence-bond QSL candidate materials KYbSe 2 and NaYbSe 2 . We measure the magnon modes in their 1/3 plateau phase, where quantitative theory is tractable, using inelastic neutron scattering and fit them using nonlinear spin wave theory. We also fit the KYbSe 2 heat capacity using high-temperature series expansion. Both KYbSe 2 fits yield the same magnetic Hamiltonian to within uncertainty, confirming previous estimates and showing the Heisenberg ratio J 2 / J 1 to be an accurate model for these materials. Most importantly, comparing KYbSe 2 and NaYbSe 2 shows that the smaller A -site Na + ion has a larger J 2 / J 1 ratio. However, hydrostatic pressure applied to KYbSe 2 increases the ordering temperature (a result consistent with density functional theory calculations), indicating that pressure decreases J 2 / J 1 . In conclusion, these results show how the periodic table and hydrostatic pressure can tune the A YbSe 2 materials in a controlled way.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Enhancing Regional Seismic Velocity Models With Higher‐Resolution Local Results Using Sparse Dictionary Learning

Abstract We use sparse dictionary learning to develop transformations between seismic velocity models of different resolution and spatial extent. Starting with data in the common region of both models, the method can enhance a regional lower‐resolution model to match the style and resolution of local higher‐resolution results while preserving its regional coverage. The method is demonstrated by applying it to two‐dimensional V S and three‐dimensional V P and V S regional and local velocity models in southern California. The enhanced reconstructed regional results exhibit clear visual improvements, especially in the reconstructed V P / V S ratios, and better correlations with geological features. Moreover, the reconstructed regional V P , V S models outperform the original ones in comparison of simulated earthquake waveforms to observations. The improved fitting to observed waveforms extends beyond the domain of the overlapping region. The developed dictionary learning approach provides physically interpretable results and offers a powerful tool for additional applications of data enhancement in earth sciences.

Geochemistry & Geophysics↗
DOE OSTI2024

Dynamics of self-hybridized exciton–polaritons in 2D halide perovskites

Abstract Excitons, bound electron–hole pairs, in two-dimensional hybrid organic inorganic perovskites (2D HOIPs) are capable of forming hybrid light-matter states known as exciton-polaritons (E–Ps) when the excitonic medium is confined in an optical cavity. In the case of 2D HOIPs, they can self-hybridize into E–Ps at specific thicknesses of the HOIP crystals that form a resonant optical cavity with the excitons. However, the fundamental properties of these self-hybridized E–Ps in 2D HOIPs, including their role in ultrafast energy and/or charge transfer at interfaces, remain unclear. Here, we demonstrate that >0.5 µm thick 2D HOIP crystals on Au substrates are capable of supporting multiple-orders of self-hybridized E–P modes. These E–Ps have high Q factors (>100) and modulate the optical dispersion for the crystal to enhance sub-gap absorption and emission. Through varying excitation energy and ultrafast measurements, we also confirm energy transfer from higher energy E–Ps to lower energy E–Ps. Finally, we also demonstrate that E–Ps are capable of charge transport and transfer at interfaces. Our findings provide new insights into charge and energy transfer in E–Ps opening new opportunities towards their manipulation for polaritonic devices.

42 ENGINEERING↗
DOE OSTI2023

Shear band velocity and activation volume during shear deformation by acoustic emission in a Zr-based bulk metallic glass

Here, an analysis is presented for the shear band velocity of plastic deformation and activation volume of the shear transformation zone (STZ) in a Zr 60 Cu 30 Al 10 bulk metallic glass (BMG). Compared to the values calculated by the stick-slip model, the values of shear band velocity calculated after optimization by the acoustic emission technique are much larger than those reported previously. Plastic flow in BMGs is found to be described by a power-law correlation between the maximum velocity of the shear band and the strain rates. Combining the free volume theory and the STZ theory, the relationship between the volume change in the STZ and the shear band velocity is derived as $Ω=A$(27–ln$v/l$). The value of A, which is a material dependent constant, is 5.43 × 10 –3 for the current BMG at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spin wave Hamiltonian and anomalous scattering in NiPS 3

Here, we report a comprehensive spin wave analysis of the semiconducting honeycomb van der Waal antiferromagnet NiPS 3 . Using single-crystal inelastic neutron scattering, we map out the full Brillouin zone and fit the observed modes to a spin wave model with rigorously defined uncertainty. We find that the third-nearest-neighbor exchange J 3 dominates the Hamiltonian, a feature which we fully account for by ab initio density functional theory calculations. We also quantify the degree to which the threefold rotation symmetry is broken and account for the Q = 0 excitations observed in other measurements, yielding a spin exchange model which is consistent across multiple experimental probes. We also identify a strongly reduced static ordered moment and reduced low-energy intensity relative to the linear spin wave calculations, signaling unexplained features in the magnetism which requires going beyond the linear spin wave approximation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Challenges and Prospects of All-Solid-State Electrodes for Solid-State Lithium Batteries

In the development of all-solid-state lithium batteries (ASSLB), progress is made with solid-state electrolytes; however, challenges regarding compatibility and stability still exist with solid electrodes. These issues result in a low battery capacity and short cycle life, which limit the commercial application of ASSLBs. Here, this review summarizes the recent research progress on solid-state electrodes in ASSLBs including the solid–solid interface phenomena such as the interface between electrode materials and electrolytes. The mechanical stability problems in solid electrodes, including fracture, brittleness, and deformation of electrode materials, are also discussed, and corresponding methods to measure the solid electrode stress are provided. In addition, strategies for mitigating stress-related issues are examined. Finally, the fabrication process of solid electrodes is introduced and their future developments, including the exploration of new electrode materials and the design of more intelligent electrode structures, are proposed.

25 ENERGY STORAGE↗
DOE OSTI2023

Lateral Variations Across the Southern San Andreas Fault Zone Revealed From Analysis of Traffic Signals at a Dense Seismic Array

Abstract We image the shallow seismic structure across the Southern San Andreas Fault (SSAF) using signals from freight trains and trucks recorded by a dense nodal array, with a linear component perpendicular to SSAF and two 2D subarrays centered on the Banning Fault and Mission Creek Fault (MCF). Particle motion analysis in the frequency band 2–5 Hz shows that the examined traffic sources can be approximated as moving single‐ or multi‐point sources that primarily induce Rayleigh waves. Using several techniques, we resolve strong lateral variations of Rayleigh wave velocities and Q ‐values across the SSAF, including 35% velocity reduction across MCF toward the northeast and strong attenuation around the two fault strands. We further resolve 10% mass density reduction and 45% shear modulus decrease across the MCF. These findings suggest that the MCF is currently the main strand of the SSAF in the area with important implications for seismic hazard assessments.

58 GEOSCIENCES↗