Search NASA⌕ Search

Engineering topics

Zhang, Heng

Publications and source records attributed to Zhang, Heng.

At least 19 records

Numerical investigation and experimental validation of water condensation in the gas diffusion layer with different properties

Liquid water in porous media hinders the transport of reactant to catalyst layer, where the electrochemical reactions occur, which in turn, reduces performance and lifetime of a proton exchange membrane fuel cell (PEMFC). In this study, two types of gas diffusion layer (GDL) materials are used to study the two-phase saturation distribution in a PEMFC. The correlations between the effective and anisotropic transport properties and porosity of the two GDLs are solved by the pore scale model. In addition, the anisotropic liquid water permeability and the relationship between saturation pressure and capillary pressure is determined by using the Lattice-Boltzmann method. Fuel cell performance as well as liquid water distribution in the GDL using neutron radiography are obtained for validation. Under wet conditions, the cell with Freudenberg GDL performs better than that using Toray GDL, especially at high current densities. The results of the two-phase model simulation show that the peak water saturation for Toray GDL occurs in the catalyst layer and can reach 40%, while the peak water saturation for Freudenberg GDL occurs inside the GDL directly under the ribs and only reaches 25% saturation. The combined results provide key insights to enable high power density operation of a PEMFC through GDL material optimization.

42 ENGINEERING↗

Carbon Nanosphere-Encapsulated Fe Core–Shell Structures for Catalytic CO 2 Hydrogenation

In this work, we synthesized a unique carbon nanosphere (CNS)-encapsulated Fe core–shell catalyst (CNS–Fe) for CO 2 hydrogenation. The synthesized CNS–Fe catalyst exhibited a core–shell structure with a core of ca. 40 nm containing iron species and a shell thickness of ca. 10 nm composed of mainly graphitic carbon. X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, and thermogravimetric analysis were used to characterize the fresh and spent CNS–Fe catalysts and reveal a mixture of Fe 3 O 4 , metallic Fe, and Fe 5 C 2 in the core and graphitic carbon as the shell with defect sites. Hydrogen temperature-programmed reduction, X-ray absorption near-edge structure, and extended X-ray absorption fine structure for the fresh CNS–Fe confirmed the composition of the iron species encapsulated in the CNS. The catalytic performance of CNS–Fe was investigated at ambient pressure for CO2 hydrogenation with hydrocarbons (CH 4 , C 2 –C 4 = , C 2 –C 4 0 ), and CO was observed as the main product.

36 MATERIALS SCIENCE↗

Vimentin loss promotes cancer proliferation through up-regulating Rictor/AKT/β-catenin signaling pathway

Vimentin protein is one of the main cytoskeleton and plays an important role in cell motility and metastasis. Nowadays, vimentin is widely studied as an epithelial-mesenchymal transition (EMT) marker of cancer cells while its involvement in cancer proliferation is poorly understood. In this study, we investigated the participation of vimentin in regulating cancer proliferation by silencing VIM gene in four cancer cell lines. Our results demonstrated that vimentin loss significantly induced cancer cell proliferation both in vitro and in vivo, which has not been reported so far. Mechanistically, knockdown of vimentin expression activated AKT phosphorylation and its downstream β-catenin signaling. Nuclear translocation and transcriptional activity of β-catenin was enhanced after silencing vimentin expression. Furthermore, vimentin loss could prevent Rictor from autophagy-dependent degradation via reducing AMPK-mediated autophagy signaling. AICAR, an AMPK activator, down-regulated Rictor and p-AKT levels while vimentin knockdown could rescue the effects. In vivo, it was also found that Ki67 expression and p-AKT/β-catenin signaling pathway were obviously up-regulated in the tumor tissues in which vimentin was silenced compared to control groups. Taken together, these data showed the novel function of vimentin in regulating cancer proliferation via Rictor/AKT/β-catenin signaling pathway, which suggested that it need more careful consideration before inhibiting metastatic cancers through targeting vimentin.

60 APPLIED LIFE SCIENCES↗

Differences in Sb 2 Te 3 growth by pulsed laser and sputter deposition

High quality van der Waals chalcogenides are important for phase change data storage, thermoelectrics, and spintronics. Using a combination of statistical design of experiments and density functional theory, we clarify how out-of-equilibrium van der Waals epitaxial deposition methods can improve the crystal quality of Sb 2 Te 3 films. We compare films grown by radio frequency sputtering and pulsed laser deposition (PLD). The growth factors that influence the crystal quality for each method are different. For PLD grown films a thin amorphous Sb 2 Te 3 seed layer most significantly influences the crystal quality. In contrast, the crystalline quality of films grown by sputtering is rather sensitive to the deposition temperature and less affected by the presence of a seed layer. This difference is somewhat surprising as both methods are out-of-thermal-equilibrium plasma-based methods. Non-adiabatic quantum molecular dynamics simulations show that this difference originates from the density of excited atoms in the plasma. The PLD plasma is more intense and with higher energy than that used in sputtering, and this increases the electronic temperature of the deposited atoms, which concomitantly increases the adatom diffusion lengths in PLD. In contrast, the adatom diffusivity is dominated by the thermal temperature for sputter grown films. These results explain the wide range of Sb 2 Te 3 and superlattice crystal qualities observed in the literature. Finally, these results indicate that, contrary to popular belief, plasma-based deposition methods are suitable for growing high quality crystalline chalcogenides.

36 MATERIALS SCIENCE↗

Structural Basis for EPC1-Mediated Recruitment of MBTD1 into the NuA4/TIP60 Acetyltransferase Complex

MBTD1, a H4K20me reader, has recently been identified as a component of the NuA4/TIP60 acetyltransferase complex, regulating gene expression and DNA repair. NuA4/TIP60 inhibits 53BP1 binding to chromatin through recognition of the H4K20me mark by MBTD1 and acetylation of H2AK15, blocking the ubiquitination mark required for 53BP1 localization at DNA breaks. The NuA4/TIP60 non-catalytic subunit EPC1 enlists MBTD1 into the complex, but the detailed molecular mechanism remains incompletely explored. Here, we present the crystal structure of the MBTD1-EPC1 complex, revealing a hydrophobic C-terminal fragment of EPC1 engaging the MBT repeats of MBTD1 in a site distinct from the H4K20me binding site. Different cellular assays validate the physiological significance of the key residues involved in the MBTD1-EPC1 interaction. Our study provides a structural framework for understanding the mechanism by which MBTD1 recruits the NuA4/TIP60 acetyltransferase complex to influence transcription and DNA repair pathway choice.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of hydrothermal pretreatment severity on lignin inhibition in enzymatic hydrolysis

Hydrothermal pretreatment is commonly used for enhancing enzymatic hydrolysis of lignocellulosics. Spruce and wheat straw were pretreated with increasing severity and lignin characteristics were analysed. The effect of enzymatically isolated lignin on the hydrolysis of Avicel and the adsorption of a cellobiohydrolase onto lignin was measured. Non-pretreated lignins had only a minor effect on Avicel hydrolysis. The structural changes in lignin accompanying hydrothermal pretreatment were associated with increased binding and inactivation of the cellulase on the lignin surface. The inhibitory effect was more pronounced in spruce than in wheat straw lignin. However, similar pretreatment severities caused similar levels of inhibition in Avicel hydrolysis for both biomass sources. The combined severity factor of the pretreatment correlated well with the inhibitory effect of lignin.

09 BIOMASS FUELS↗

Upconversion Er-doped TiO2 nanorod arrays for perovskite solar cells and the performance improvement

Highlights: • Er-doped TiO{sub 2} nanorod absorbs IR and converts into visible light. • The introduction of Er could make a positive shift in flat-band potential. • Er-doped TiO{sub 2} solar cells show a 20% increment in the current density. - Abstract: Upconversion erbium-doped rutile TiO{sub 2} nanorod arrays were synthesized by a facile process and applied in perovskite solar cells (PSCs). The structure was characterized by X-ray powder diffraction (XRD). Energy dispersive spectrometer (EDS) and Tauc plot indicated that Er was successfully introduced and changed TiO{sub 2} band gap from 3.00 eV to 3.07 eV. The incorporation of Er shifts the flat band potential positively and enhances the electron density. The Er-doped TiO{sub 2} nanorods have a broad absorption in the infrared light and up-convert it into visible light, which provides a possibility for PSCs to use NIR light for higher performance. A higher photocurrent density (J{sub sc}) of 22.97 mA/cm{sup 2} and a power conversion efficiency (PCE) of 10.6% were obtained, showing 20% and 16.5% increment in J{sub sc} and PCE, respectively, when compared with the un-doped device. The performance improvement was ascribed to the upconversion performance, enhanced electron-injection efficiency and reduced charge recombination.

14 SOLAR ENERGY↗