Engineering topics

Zhang, J.

Publications and source records attributed to Zhang, J..

At least 37 records · Page 2

NASA NTRS2006

Major Geomagnetic Storms (Dst less than or equal to -100 nT) Generated by Corotating Interaction Regions

Seventy-nine major geomagnetic storms (minimum Dst less than or equal to -100 nT) observed in 1996 to 2004 were the focus of a Living with a Star Coordinated Data-Analysis Workshop (CDAW) in March, 2005. In 9 cases, the storm driver appears to have been purely a corotating interaction region (CIR) without any contribution from coronal mass ejection-related material (interplanetary coronal mass ejections, ICMEs). These storms were generated by structures within CIRs located both before and/or after the stream interface that included persistently southward magnetic fields for intervals of several hours. We compare their geomagnetic effects with those of 159 CIRs observed during 1996 - 2005. The major storms form the extreme tail of a continuous distribution of CIR geoeffectiveness which peaks at Dst approx. -40 nT but is subject to a prominent seasonal variation of - 40 nT which is ordered by the spring and fall equinoxes and the solar wind magnetic field direction towards or away from the Sun. The O'Brien and McPherron [2000] equations, which estimate Dst by integrating the incident solar wind electric field and incorporating a ring current loss term, largely account for the variation in storm size. They tend to underestimate the size of the larger CIR-associated storms by Dst approx. 20 nT. This suggests that injection into the ring current may be more efficient than expected in such storms. Four of the nine major storms in 1996 - 2004 occurred during a period of less than three solar rotations in September - November, 2002, also the time of maximum mean IMF and solar magnetic field intensity during the current solar cycle. The maximum CIR-storm strength found in our sample of events, plus additional 23 probable CIR-associated Dst less than or equal to -100 nT storms in 1972 - 1995, is (Dst = -161 nT). This is consistent with the maximum storm strength (Dst approx. -180 nT) expected from the O'Brien and McPherron equations for the typical range of solar wind electric fields associated with CIRs. This suggests that CIRs alone are unlikely to generate geomagnetic storms that exceed these levels.

Richardson, I. G.↗

NASA NTRS2005

NASA Supercomputer Improves Prospects for Ocean Climate Research

Estimates of ocean circulation constrained by in situ and remotely sensed observations have become routinely available during the past five years, and they are being applied to myriad scientific and operational problems [Stammer et al.,2002]. Under the Global Ocean Data Assimilation Experiment (GODAE), several regional and global estimates have evolved for applications in climate research, seasonal forecasting, naval operations, marine safety, fisheries,the offshore oil industry, coastal management, and other areas. This article reports on recent progress by one effort, the consortium for Estimating the Circulation and Climate of the Ocean (ECCO), toward a next-generation synthesis of ocean and sea-ice data that is global, that covers the full ocean depth, and that permits eddies.

Estimating the Circulation and Climate of the Ocea↗

NASA NTRS2003

A high voltage Dickson charge pump in SOI CMOS

An improved charge pump that utilizes a MOSFET body diode as a charge transfer switch is discussed.

high voltage devices DC-DC converters charge pumps↗

NASA NTRS2003

The Magnetic Helicity Budget of Solar Active Regions and Coronal Mass Ejections

We compute the magnetic helicity injected by transient photospheric horizontal flows in six solar active regions associated with halo coronal mass ejections (CMEs) that produced major geomagnetic storms and magnetic clouds (MCs) at 1 AU. The velocities are computed using the local correlation tracking (LCT) method. Our computations cover time intervals of 1 10-150 hr, and in four active regions the accumulated helicities due to transient flows are factors of 8-12 larger than the accumulated helicities due to differential rotation. As was first pointed out by DCmoulin and Berger, we suggest that the helicity computed with the LCT method yields not only the helicity injected from shearing motions but also the helicity coming from flux emergence. We compare the computed helicities injected into the corona with the helicities carried away by the CMEs using the MC helicity computations as proxies to the CME helicities. If we assume that the length of the MC flux tubes is I = 2 AU, then the total helicities injected into the corona are a factor of 2.94 lower than the total CME helicities. If we use the values of 1 determined by the condition for the initiation of the kink instability in the coronal flux rope or I = 0.5 AU then the total CME helicities and the total helicities injected into the corona are broadly consistent. Our study, at least partially, clears up some of the discrepancies in the helicity budget of active regions because the discrepancies appearing in our paper are much smaller than the ones reported in previous studies. However, they point out the uncertainties in the MC/CME helicity calculations and also the limitations of the LCT method, which underestimates the computed helicities.

Nindos, A.↗

NASA NTRS1993

Helical Gears Modified To Decrease Transmission Errors

Tooth surfaces of helical gears modified, according to proposed design concept, to make gears more tolerant of misalignments and to improve distribution of contact stresses. Results in smaller transmission errors, with concomitant decreases in vibrations and noise and, possibly, increases in service lives.

Handschuh, R. F.↗

NASA NTRS1993

The microstructure and formation of duplex and black plessite in iron meteorites

Two of the most common plessite structures, duplex and black plessite, in the taenite region of the Windmanstatten pattern of two iron meteorites (Grant and Carlton) are characterized using high-resolution electron microscopy and microanalysis techniques. Two types of gamma precipitates, found in the duplex plessite and black plessite regions, respectively, are identified, and their morphologies are described. The formation of the plessite structure is discussed using the information obtained in this study and results of a parallel investigation of decomposed martensitic Fe-Ni laboratory alloys.

Zhang, J.↗

NASA NTRS1992

X ray microcalorimeters: Principles and performance

Microcalorimeters operating at cryogenic temperatures can be excellent X-ray spectrometers. They simultaneously offer very high spectral resolving power and high efficiency. These attributes are important for X-ray astronomy where most sources have low fluxes and where high spectral resolution is essential for understanding the physics of the emitting regions. The principles of operation of these detectors, limits to their sensitivity, design considerations, techniques of fabrication, and their performance as X-ray spectrometers, are reviewed.

Moseley, S. H.↗

NASA NTRS1992

The Diffuse X-ray Spectrometer Experiment

The Diffuse X-ray Spectrometer Experiment, or 'DXS', is designed to measure the spectrum of the low-energy diffuse X-ray background with about 10 eV energy resolution and 15-deg spatial resolution. During a 5-day Space Shuttle mission, DXS is to measure the spectrum of ten 15 x 15 deg regions lying along a single 150-deg-long great circle arc on the sky. DXS carries two large-area X-ray Bragg spectrometers for the 44-84 A wavelength range; these permit measurement of the wavelength spectrum of the cosmic low-energy diffuse X-ray background with good spectral resolution.

Sanders, W. T.↗

NASA NTRS1992

Thermal detectors for X-ray astronomy - Current performance and limitations

We have been developing thermal detectors for X-ray astronomy. These detectors have the advantages of both high energy resolution and high quantum efficiency. A practical detector operating at a temperature of 0.1 K could ideally have a resolution as good as 1 eV (FWHM). We have produced a detector with a measured resolution of 7 eV (FWHM) for 6 keV X-rays. The detailed behavior of the detector thermistor and thermal links impose limits on performance. Techniques for improving detector behavior will be discussed. We are currently constructing an instrument for launch on a sounding rocket to observe the soft X-ray emission from the interstellar medium.

Juda, M.↗

NASA NTRS1992

An APFIM/AEM Study of Phase Decompositions in Fe-Ni Alloys at Low Temperatures

A combined atom probe field ion microscopy and analytical electron microscopy characterization has been performed on laboratory aged martensitic and austenitic specimens of FeNi and FeNiP alloys. These techniques revealed that the martensitic 24.1 and 28.6 at.% Ni alloys decomposed during aging for 1 year at 300 C to form face centered cubic precipitates of approx. 56 at.% Ni in a body centered cubic matrix containing approx. 20 at.% Ni. Some thin platelets were observed in the field ion micrographs of the austenitic Fe-42.9 at. % Ni alloy and the Fe-43.2 at.% Ni-0.44 at.% P alloy after aging at 400 and 350 C. Atom probe analysis revealed phosphorus clustering in the ternary alloy aged at 300 C.

Zhang, J.↗

NASA NTRS1991

A fast adaptive convex hull algorithm on two-dimensional processor arrays with a reconfigurable BUS system

A bus system that can change dynamically to suit computational needs is referred to as reconfigurable. We present a fast adaptive convex hull algorithm on a two-dimensional processor array with a reconfigurable bus system (2-D PARBS, for short). Specifically, we show that computing the convex hull of a planar set of n points taken O(log n/log m) time on a 2-D PARBS of size mn x n with 3 less than or equal to m less than or equal to n. Our result implies that the convex hull of n points in the plane can be computed in O(1) time in a 2-D PARBS of size n(exp 1.5) x n.

Olariu, S.↗

NASA NTRS1990

Computation and turbulence modeling for three-dimensional boundary layers including turbomachinery rotor flows

A method is developed for predicting the behavior of three-dimensional, turbulent boundary layers occurring in internal flows, including those on turbomachinery rotor blades. These boundary layers are complex, turbulent, and subject to Coriolis and centrifugal forces. The major thrust of this paper is the development and use of an algebraic Reynolds stress model (ARSM) that captures the changes in turbulent flow structure arising from curvature, rotation, and three dimensionality. The prediction of pressure-driven secondary flow agrees well with the measured data, and all three turbulence models (k-epsilon, algebraic eddy viscosity, and ARSM) show the same level of agreement. The prediction of boundary-layer development on rotor blades shows much better agreement with measurements with the ARSM. It is essential to employ higher-order turbulence models to capture the effects of rotation, curvature, and three dimensionality on boundary layers in turbomachinery.

Zhang, J.↗

NASA NTRS1990

Electron microscopy study of the iron meteorite Santa Catharina

A characterization of the microstructural features of Santa Catharina (SC) from the millimeter to submicron scale is presented. The same specimen was examined using an optical microscope, a scanning electron microscope, an electron probe microanalyzer, and an analytical electron microscope. Findings include the fact that SC metal nodules may have different bulk Ni values, leading to different microstructures upon cooling; that SC USNM 6293 is the less corroded sample, as tetrataenite exists as less than 10 nm ordered domains throughout the entire fcc matrix (it is noted that this structure is the same as that of the Twin City meteorite and identical to clear taenite II in the retained taenite regions of the octahedrites); that SC USNM 3043 has a more complicated microstructure due to corrosion; and that the low Ni phase of the cloudy zone was selectively corroded in some areas and formed the dark regions, indicating that the SC meteorite corrosion process was electrochemical in nature and may involve Cl-containing akaganeite.

Zhang, J.↗

NASA NTRS1990

Thermal detection of X-rays

The development of calorimeters is described in terms of their proposed application to sounding-rocket investigations of cosmic X-ray sources. The fundamental theory of the energy resolution of the devices is given, and general discussions are presented regarding the limitations associated with the materials used and available thermometer types. Also given are data describing electrical nonlinearity as a function of temperature, thermistor sensitivity, and heat capacity, as well as data regarding the excess noise that aids in the conduction process. Cryogenic calorimeters based on doped semiconductor thermistors are found to be limited, although thermal detectors have important applications to high-resolution laboratory spectroscopy. Electrical nonlinearity and the excess noise are found to be important for obtaining optimum heat capacity in the thermistor.

Mccammon, D.↗

NASA NTRS1990

Observing soft X-ray line emission from the interstellar medium with X-ray calorimeter on a sounding rocket

For an X-ray calorimeter working at 0.1 K, the energy resolution ideally can be as good as one eV for a practical detector. A detector with a resolution of 17 eV FWHM at 6 keV has been constructed. It is expected that this can be improved by a factor of two or more. With X-ray calorimeters flown on a sounding rocket, it should be possible to observe soft X-ray line emission from the interstellar medium over the energy range 0.07 to 1 keV. Here, a preliminary design for an X-ray calorimeter rocket experiment and the spectrum which might be observed from an equilibrium plasma are presented. For later X-ray calorimeter sounding rocket experiments, it is planned to add an aluminum foil mirror with collecting area of about 400 sq cm to observe line features from bright supernova remnants.

Zhang, J.↗

NASA NTRS1989

Topology of modified helical gears

The topology of several types of modified surfaces of helical gears is proposed. The modified surfaces allow absorption of a linear or almost linear function of transmission errors. These errors are caused by gear misalignment and an improvement of the contact of gear tooth surfaces. Principles and corresponding programs for computer aided simulation of meshing and contact of gears have been developed. The results of this investigation are illustrated with numerical examples.

Litvin, F. L.↗

NASA NTRS1989

Computation of three dimensional turbulent boundary layers in internal flows, including turbomachinery rotor blades

A method is developed for predicting three-dimensional turbulent boundary layers occurring in internal flows, including rotor blades of turbomachinery. These boundary layers are complex, turbulent, and are subject to Coriolis and centrifugal forces. The algebraic Reynolds stress model (ARSM) developed in this paper satisfies the realizability conditions exactly and captures the changes in turbulenet structure arising from curvature and rotation. The prediction of pressure driven secondary flow agrees well with the data and all the three turbulent models (k-e, algebraic eddy viscosity, and ARSM) show the same level of agreement. The prediction of boundary layer on rotor blades shows much better agreement with the ARSM. It is essential to employ the higher order models to capture the effects of rotation and curvature and three-dimensional boundary layers in turbomachinery.

Zhang, J.↗

NASA NTRS1989

Topology of modified helical gears

Litvin, F. L.↗