Engineering topics

Zhang, Jiatao

Publications and source records attributed to Zhang, Jiatao.

7 records

DOE OSTI2021

Revealing the effect of interfacial electron transfer in heterostructured Co 9 S 8 @NiFe LDH for enhanced electrocatalytic oxygen evolution

Heterointerface engineering is a desirable way to rationally design efficient and low-cost electrocatalysts for the oxygen evolution reaction (OER). Herein, urchin-like Co 9 S 8 @NiFe layered double hydroxide (Co 9 S 8 @NiFe LDH) heterostructured hollow spheres are assembled from Co 9 S 8 hollow spheres as the core and porous NiFe LDH nanowires as the shell. The heterostructured hollow spheres show a small overpotential of 220 mV at a current density of 10 mA cm -2 , a low Tafel slope of 52.0 mV dec -1 , and robust stability, which is better than that of commercial IrO 2 and most reported non-precious electrocatalysts. Density functional theory (DFT) calculations show that the synergetic effect at the interface could improve the electrical conductivity of Co 9 S 8 @NiFe LDH, induce electron transfer from NiFe LDH to Co 9 S 8 , and lower the energy barriers of intermediates for the OER, leading to enhanced electrocatalytic activity. Meanwhile, the urchin-like hollow structure with nanopores and super-hydrophilicity can provide desired structural stability, facilitate ion penetration and release bubbles, improving the accessibility of active sites and thereby boosting OER catalytic performance. This work provides a viable route to develop high performance electrocatalysts for the OER.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Visually resolving the direct Z-scheme heterojunction in CdS@ZnIn 2 S 4 hollow cubes for photocatalytic evolution of H 2 and H 2 O 2 from pure water

We report the direct Z-scheme heterojunction has been recently emerging as an appealing architecture for photocatalysts design. Its efficiency depends on the interfacial and structural features of the photocatalysts. Herein, the two-dimensional ZnIn 2 S 4 nanosheets are grown on the surface of CdS hollow cubes to construct the CdS@ZnIn 2 S 4 hierarchical hollow photocatalysts with chemically bonded interface. The visualized measurements based on spatial-resolved surface photovoltage spectroscopy, combined with other spectroscopic and simulation investigations, clearly disclose that the CdS@ZnIn 2 S 4 hollow cubes constitute a highly efficient direct Z-scheme system. This accounts for the stoichiometric generation of H 2 and H 2 O 2 from pure water observed for the CdS@ZnIn 2 S 4 sulfide-only photocatalysts under visible light irradiation with an apparent quantum efficiency of 1.63 % at 400 nm. The present work demonstrates an effective protocol to achieve comprehensive insights into the charge transfer route at semiconductor heterojunction, and offers a viable way for constructing efficient sulfide-only photocatalysts for driving water splitting reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Intrinsic and Extrinsic Exciton Recombination Pathways in AgInS 2 Colloidal Nanocrystals

Ternary I-III-VI 2 nanocrystals (NCs), such as AgInS 2 and CuInS 2 , are garnering interest as heavy-metal-free materials for photovoltaics, luminescent solar concentrators, LEDs, and bioimaging. The origin of the emission and absorption properties in this class of NCs is still a subject of debate. Recent theoretical and experimental studies revealed that the characteristic Stokes-shifted and long-lived luminescence of stoichiometric CuInS 2 NCs arises from the detailed structure of the valence band featuring two sublevels with different parity. The same valence band substructure is predicted to occur in AgInS 2 NCs, yet no experimental confirmation is available to date. Here, we use complementary spectroscopic, spectro-electrochemical, and magneto-optical investigations as a function of temperature to investigate the band structure and the excitonic recombination mechanisms in stoichiometric AgInS 2 NCs. Transient transmission measurements reveal the signatures of two subbands with opposite parity, and photoluminescence studies at cryogenic temperatures evidence a dark state emission due to enhanced exchange interaction, consistent with the behavior of stoichiometric CuInS 2 NCs. Lowering the temperature as well as applying reducing electrochemical potentials further suppress electron trapping, which represents the main nonradiative channel for exciton decay, leading to nearly 100% emission efficiency.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Cactus-like NiCo 2 S 4 @NiFe LDH hollow spheres as an effective oxygen bifunctional electrocatalyst in alkaline solution

The high-performance non-precious electrocatalysts for both oxygen redn. reaction (ORR) and oxygen evolution reaction (OER) are crucial to the practical application of fuel cells and metal-air batteries. Herein, a novel cactus-like NiCo 2 S 4 @NiFe LDH hollow sphere assembled by one-dimensional (1D) NiFe LDH nanowires and two-dimensional (2D) NiFe LDH nanosheets on the NiCo 2 S 4 hollow spheres is prepd. by a facile hydrothermal method. The outer NiFe LDH nanowires and NiFe LDH nanosheets can effectively suppress the collapse and corrosion of inner NiCo 2 S 4 hollow structure during long-term stability tests. The integration of the effective OER electrocatalyst NiFe LDH into NiCo 2 S 4 to form heterostructures, as well as the strong electronic interaction between NiCo 2 S 4 and NiFe LDH, can greatly boost both ORR and OER activities. Due to the above merits, the NiCo 2 S 4 @NiFe LDH achieves remarkably a small potential gap (ΔE = E j =10-E 1/2 ) of only 0.667 V. In this paper, we offer a facile strategy to design efficient catalysts with heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Engineering unsymmetrically coordinated Cu-S 1 N 3 single atom sites with enhanced oxygen reduction activity

Atomic interface regulation is thought to be an efficient method to adjust the performance of single atom catalysts. Herein, a practical strategy was reported to rationally design single copper atoms coordinated with both sulfur and nitrogen atoms in metal-organic framework derived hierarchically porous carbon (S-Cu-ISA/SNC). The atomic interface configuration of the copper site in S-Cu-ISA/SNC is detected to be an unsymmetrically arranged Cu-S 1 N 3 moiety. The catalyst exhibits excellent oxygen reduction reaction activity with a half-wave potential of 0.918 V vs. RHE. Additionally, through in situ X-ray absorption fine structure tests, we discover that the low-valent Cuprous-S 1 N 3 moiety acts as an active center during the oxygen reduction process. Our discovery provides a universal scheme for the controllable synthesis and performance regulation of single metal atom catalysts toward energy applications.

25 ENERGY STORAGE↗

DOE OSTI2020

In Situ Phosphatizing of Triphenylphosphine Encapsulated within Metal–Organic Frameworks to Design Atomic Co 1 –P 1 N 3 Interfacial Structure for Promoting Catalytic Performance

The engineering coordination environment offers great opportunity in performance tunability of isolated metal single-atom catalysts. For the most popular metal–N x (MN x ) structure, the replacement of N atoms by some other atoms with relatively weak electronegativity has been regarded as a promising strategy for optimizing the coordination environment of an active metal center and promoting its catalytic performance, which is still a challenge. Herein, we proposed a new synthetic strategy of an in situ phosphatizing of triphenylphosphine encapsulated within metal–organic frameworks for designing atomic Co 1 –P 1 N 3 interfacial structure, where a cobalt single atom is costabilized by one P atom and three N atoms (denoted as Co-SA/P-in situ). In the acidic media, the Co-SA/P-in situ catalyst with Co 1 –P 1 N 3 interfacial structure exhibits excellent activity and durability for the hydrogen evolution reaction (HER) with a low overpotential of 98 mV at 10 mA cm –2 and a small Tafel slope of 47 mV dec –1 , which are greatly superior to those of catalyst with Co 1 –N 4 interfacial structure. We discover that the bond-length-extended high-valence Co 1 –P 1 N 3 atomic interface structure plays a crucial role in boosting the HER performance, which is supported by in situ X-ray absorption fine structure (XAFS) measurements and density functional theory (DFT) calculation. With this work, we hope to promote the development of high performance metal single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Atomic interface effect of a single atom copper catalyst for enhanced oxygen reduction reactions

The regulation of catalytic activity in the oxygen reduction reaction (ORR) is significant to the development of metal–air batteries and other oxygen involving energy conversion devices. Herein, we propose an atomic interface strategy to construct a single atom copper catalyst (denoted as Cu-SA/SNC) which exhibits enhanced ORR activity with a half-wave potential of 0.893 V vs. RHE in alkaline media. Moreover, synchrotron-radiation-based X-ray absorption fine structure (XAFS) investigations together with density functional theory (DFT) calculations reveal that the isolated bond-shrinking low-valence Cu (+1)–N 4 –C 8 S 2 atomic interface moiety serves as an active site during the ORR process, and the synergistic mechanism between the Cu species and the carbon matrix at the atomic interface plays a critical role in boosting the ORR efficiency, by adjusting the reaction free energy of intermediate adsorption. Furthermore, this atomic interface concept may provide an alternative methodology for the rational design of advanced oxygen electrode materials and new probability to improve their catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗