Search NASA⌕ Search

Engineering topics

Zhang, Sen

Publications and source records attributed to Zhang, Sen.

53 records · Page 3

Designing Open Metal Sites in Metal–Organic Frameworks for Paraffin/Olefin Separations

Incorporating open metal sites (OMS) into metal–organic frameworks allows design of well-defined binding sites for selective molecular adsorption, which has a profound impact on catalysis and separations. We demonstrate that Cu(I) sites incorporated into MFU- 4 l preferentially adsorb olefins over paraffins. Density functional theory (DFT) calculations show that the OMS are independent, with no dependence of binding energy on olefin loading up to one olefin per Cu(I). Experimentally, increasing Cu(I) loading increased olefin uptake without affecting the binding energy, as predicted by DFT and confirmed by temperature-programmed desorption. The potential of this material for olefin/paraffin separation under ambient conditions was investigated by gas adsorption and column breakthrough experiments for an equimolar ratio of olefin/paraffin. High-grade propylene and ethylene (>99.999%) can be generated using temperature–concentration swing recycling from a Cu(I)-MFU-4l packed column with no measurable paraffin breakthrough.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy Efficient Formaldehyde Synthesis by Direct Hydrogenation of Carbon Monoxide in Functionalized Metal–Organic Frameworks

Formaldehyde (CH 2 O) is a highly versatile platform chemical with an annual production of over 30 megatons. The current most widely used industrial method for formaldehyde synthesis is very energy intensive and plagued with significant exergy losses. We propose a highly efficient heterogeneous nanoporous catalyst capable of direct hydrogenation of CO to CH 2 O followed by condensation of CH 2 O from a mixture of CO and H 2 , which are non-condensable gases. The key to this synthesis is a Lewis Pair (LP) functionalized metal-organic framework (MOF) heterogeneous porous catalyst. We have computed reaction pathways, barriers, and uncertainties for CO hydrogenation on a LP functionalized MOF using various density functional theory (DFT) methods and high-level ab initio methods. We have assessed the uncertainties in the energetics inherent in the DFT functionals. Here, we predict that the thermodynamics of CH 2 O synthesis will be enhanced relative to gas phase synthesis and more importantly, will not be equilibrium limited because the barrier to product desorption from the MOF is much lower than the barrier for the reverse reaction. Hence, the product will be continuously removed from the process, facilitating very high overall conversion rates. Our proposed process will dramatically improve the sustainability of CH 2 O synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bimetallic synergy in cobalt–palladium nanocatalysts for CO oxidation

Bimetallic and multi-component catalysts often exhibit superior activity and selectivity compared with their single-component counterparts. To investigate the origin of the composition dependence observed in the catalytic activities of CoPd bimetallic catalysts, the compositional and structural evolution of monodisperse CoPd alloy nanoparticles (NPs) were followed under catalytic CO oxidation conditions using ambient pressure X-ray spectroscopy (AP-XPS) and transmission electron microscopy (TEM). It was found that the catalysis process induced a reconstruction of the catalysts, leaving CoOx on the NP surface. The synergy between Pd and CoOx coexisting on the surface promotes the catalytic activity of the bimetallic catalysts. Such synergistic effects can be optimized by tuning the Co/Pd ratios in the NP synthesis and reach a maximum at compositions near Co 0.26 Pd 0.74 , which exhibits the lowest temperature for complete CO conversion. Our combined AP-XPS and TEM studies provide a direct observation of the bimetallic NPs surface evolution under catalytic conditions and its correlation to catalytic properties.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Favorable Core/Shell Interface within Co 2 P/Pt Nanorods for Oxygen Reduction Electrocatalysis

Here, nanostructures with nonprecious metal cores and Pt ultrathin shells are recognized as promising catalysts for oxygen reduction reaction (ORR) to enhance Pt efficiency through core/shell interfacial strain and ligand effects. However, core/shell interaction within a real catalyst is complex and due to the presence of various interfaces in all three dimensions is often oversimply interpreted. Using Co 2 P/Pt core/shell structure as a model catalyst, we demonstrate, through density functional theory (DFT) calculations that forming Co 2 P(001)/Pt(111) interface can greatly improve Pt energetics for ORR, while Co 2 P(010)/Pt(111) is highly detrimental to ORR catalysis. We develop a seed-mediated approach to core/shell Co 2 P/Pt nanorods (NRs) within which Co 2 P(001)/Pt(111) interface is selectively expressed over the side facets and the undesired Co 2 P(010)/Pt(111) interface is minimized. The resultant Co 2 P/Pt NRs are highly efficient in catalyzing ORR in acid, superior to benchmark CoPt alloy and Pt nanoparticle catalyst. As the first example of one-dimensional (1D) core/shell nanostructure with an ultrathin Pt shell and a nonprecious element core, this strategy could be generalized to develop ultralow-loading precious-metal catalysts with favorable core/shell interactions for ORR and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrathin Two-dimensional Metallic Nanocrystals for Renewable Energy Electrocatalysis [Ultrathin Two-dimensional Metallic Nanocrystals for Heterogeneous Catalysis]

Even since the discovery of exfoliated graphene, exponentially growing efforts have been devoted to the search of novel 2 dimensional (2D) nanomaterials with atomic thickness and the extension of their applications. Among the huge 2D materials family, ultrathin 2D metallic nanocrystals gain vast attentions due to the unique importance of transition metals to heterogeneous catalysis. Here, we review recent representative advances in ultrathin 2D metallic nanocrystals and their catalytic applications towards a variety of reactions, including the hydrogen generation, oxygen reduction/evolution, CO 2 activation and small molecules oxidation/hydrogenation. Special focuses are placed in currently mechanical understanding of bottom-up fabrication of ultrathin 2D metallic nanocrystals, the establishment of their structure-performance relationship as well as the implication of their real applications in devices. Here, we also shed light on further structural modification of the ultrathin 2D metallic nanocrystals to achieve the optimized catalytic performance. At end of this review, we discuss the remaining challenges and future opportunities in this burgeoning research area.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Core/shell face-centered tetragonal FePd/Pd nanoparticles as an efficient non-Pt catalyst for the oxygen reduction reaction

We report the synthesis of core/shell face-centered tetragonal (fct)-FePd/Pd nanoparticles (NPs) via reductive annealing of core/shell Pd/Fe 3 O 4 NPs followed by temperature-controlled Fe etching in acetic acid. Among three different kinds of core/shell FePd/Pd NPs studied (FePd core at similar to 8 nm and Pd shell at 0.27, 0.65, or 0.81 nm), the fct-FePd/Pd-0.65 NPs are the most efficient catalyst for the oxygen reduction reaction (ORR) in 0.1 M HClO 4 with Pt-like activity and durability. This enhanced ORR catalysis arises from the desired Pd lattice compression in the 0.65 nm Pd shell induced by the fct-FePd core. Lastly, our study offers a general approach to enhance Pd catalysis in acid for ORB.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multimetallic nanoparticle catalysts with enhanced electrooxidation

A new structure-control strategy to optimize nanoparticle catalysis is provided. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face centered cubic (fcc) structure to chemically ordered face centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu nanoparticles show high CO poisoning resistance, achieve mass activity as high as about 2810 mA/mg Pt, and retain greater than 90% activity after a 13 hour stability test.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface profile control of FeNiPt/Pt core/shell nanowires for oxygen reduction reaction

The ever-increasing energy demand requires renewable energy schemes with low environmental impacts. Electrochemical energy conversion devices, such as fuel cells, combine fuel oxidization and oxygen reduction reactions and have been studied extensively for renewable energy applications. However, their energy conversion efficiency is often limited by kinetically sluggish chemical conversion reactions, especially oxygen reduction reaction (ORR). [1-5] To date, extensive efforts have been put into developing efficient ORR catalysts with controls on catalyst sizes, compositions, shapes and structures. [6-12] Recently, Pt-based catalysts with core/shell and one-dimensional nanowire (NW) morphologies were found to be promising to further enhance ORR catalysis. With the core/shell structure, the ORR catalysis of a nanoparticle (NP) catalyst can be tuned by both electronic and geometric effects at the core/shell interface. [10,13,14] With the NW structure, the catalyst interaction with the conductive support can be enhanced to facilitate electron transfer between the support and the NW catalyst and to promote ORR. [11,15,16]

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Scaling limit of N=6 superconformal Chern-Simons theories and Lorentzian Bagger-Lambert theories

We show that the N=8 superconformal Bagger-Lambert theory based on the Lorentzian 3-algebra can be derived by taking a certain scaling limit of the recently proposed N=6 superconformal U(N)xU(N) Chern-Simons-matter theories at level (k,-k). The scaling limit (and Inoenue-Wigner contraction) is to scale the trace part of the bifundamental fields as X{sub 0}{yields}{lambda}{sup -1}X{sub 0} and an axial combination of the two gauge fields as B{sub {mu}}{yields}{lambda}B{sub {mu}}. Simultaneously, we scale the level as k{yields}{lambda}{sup -1}k and then take {lambda}{yields}0 limit. Interestingly, the same constraint equation {partial_derivative}{sup 2}X{sub 0}=0 is derived by imposing finiteness of the action. In this scaling limit, M2 branes are located far from the origin of C{sup 4}/Z{sub k} compared to their fluctuations and Z{sub k} identification becomes a circle identification. Hence, the scaled theory describes N=8 supersymmetric theory of 2-branes with dynamical coupling. The coupling constant is promoted to a space-time dependent SO(8) vector X{sub 0}{sup I} and we show that the scaled theory has a generalized conformal symmetry as well as manifest SO(8) with the transformation of the background fields X{sub 0}{sup I}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Janus field theories from multiple M2 branes

Based on the recent proposal of N=8 superconformal gauge theories of the multiple M2 branes, we derive (2+1)-dimensional supersymmetric Janus field theories with a space-time dependent coupling constant. From the original Bagger-Lambert model, we get a supersymmetric field theory with a similar action to the N D2 branes, but the coupling varies with the space-time as a function of the light-cone coordinate, g(t+x). Half of the supersymmetries can be preserved. We further investigate the M2 brane action deformed by mass and Myers-like terms. In this case, the final Yang-Mills action is deformed by mass and Myers terms, and the coupling behaves as exp({mu}x) where {mu} is a constant mass parameter. Weak coupling gauge theory is continuously changed to strong coupling in the large x region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of a composite tailoring procedure for airplane wing

The development of a composite wing box section using a higher order-theory is proposed for accurate and efficient estimation of both static and dynamic responses. The theory includes the effect of through-the-thickness transverse shear deformations which is important in laminated composites and is ignored in the classical approach. The box beam analysis is integrated with an aeroelastic analysis to investigate the effect of composite tailoring using a formal design optimization technique. A hybrid optimization procedure is proposed for addressing both continuous and discrete design variables.

Chattopadhyay, Aditi↗