Search NASA⌕ Search

Engineering topics

Zhang, Shengjie

Publications and source records attributed to Zhang, Shengjie.

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modifying the Reactivity of Single Pd Sites in a Trimetallic Sn‐Pd‐Ag Surface Alloy: Tuning CO Binding Strength

Abstract Improving control over active‐site reactivity is a grand challenge in catalysis. Single‐atom alloys (SAAs) consisting of a reactive component doped as single atoms into a more inert host metal feature localized and well‐defined active sites, but fine tuning their properties is challenging. Here, a framework is developed for tuning single‐atom site reactivity by alloying in an additional inert metal, which this work terms an alloy‐host SAA. Specifically, this work creates about 5% Pd single‐atom sites in a Pd 33 Ag 67 (111) single crystal surface, and then identifies Sn based on computational screening as a suitable third metal to introduce. Subsequent experimental studies show that introducing Sn indeed modifies the electronic structure and chemical reactivity (measured by CO desorption energies) of the Pd sites. The modifications to both the electronic structure and the CO adsorption energies are in close agreement with the calculations. These results indicate that the use of an alloy host environment to modify the reactivity of single‐atom sites can allow fine‐tuning of catalytic performance and boost resistance against strong‐binding adsorbates such as CO.

Mohrhusen, Lars↗
DOE OSTI2024

100% selective cyclotrimerization of acetylene to benzene on Ag(111)

If a critical acetylene surface coverage threshold above one monolayer is attained, acetylene conversion to benzene occurs with 100% selectivity on Ag(111). The presence of multiple monolayers has the unforeseen effect of increasing benzene production while maintaining selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Remotely Bonded Bridging Dioxygen Ligands Enhance Hydrogen Transfer in a Silica-Supported Tetrairidium Cluster Catalyst

A longstanding challenge in catalysis by noble metals has been to understand the origin of enhancements of rates of hydrogen transfer that result from bonding of oxygen near metal sites. We investigated structurally well-defined catalysts consisting of supported tetrairidium carbonyl clusters with single-atom (apical iridium) catalytic sites for ethylene hydrogenation. Reaction of the clusters with ethylene and H 2 followed by O 2 led to the onset of catalytic activity as a terminal CO ligand at each apical Ir atom was removed and bridging dioxygen ligands replaced CO ligands at neighboring (basal-plane) sites. The presence of the dioxygen ligands caused a 6-fold increase in the catalytic reaction rate, which is explained by the electron-withdrawing capability induced by the bridging dioxygen ligands, consistent with the inference that reductive elimination is rate determining. Electronic structure calculations demonstrate an additional role of the dioxygen ligands, changing the mechanism of hydrogen transfer from that involving equatorial hydride ligands to that involving bridging hydride ligands. This mechanism is made evident by an inverse kinetic isotope effect observed in ethylene hydrogenation reactions with H 2 and, alternatively, with D 2 on the cluster incorporating the dioxygen ligands, and is a consequence of quasi-equilibrated hydrogen transfer in this catalyst. The same mechanism accounts for rate enhancements induced by the bridging dioxygen ligands for the catalytic reaction of H 2 with D 2 to give HD. Here, we posit that the mechanism involving bridging hydride ligands facilitated by oxygen ligands remote from the catalytic site may have some generality in catalysis by oxide-supported noble metals.

02 PETROLEUM↗
DOE OSTI2023

Selective Pb 2+ removal and electrochemical regeneration of fresh and recycled FeOOH

Heavy metal pollution is a key environmental problem. Selectively extracting heavy metals could accomplish water purification and resource recycling simultaneously. Adsorption is a promising approach with a facile process, adaptability for the broad concentration of feed water, and high selectivity. However, the adsorption method faces challenges in synthesizing high-performance sorbents and regenerating adsorbents effectively. FeOOH is an environmentally friendly sorbent with low-cost production on a large scale. Nevertheless, the selectivity behavior and regeneration of FeOOH are seldom studied. Therefore, we investigated the selectivity of FeOOH in a mixed solution of Co 2+ , Ni 2+ , and Pb 2+ and proposed to enhance the capacity of FeOOH and regenerate it by using external charges. Without charge, the FeOOH electrode shows a Pb 2+ uptake capacity of 20 mg/g. After applying a voltage of –0.2/+0.8 V, the uptake capacity increases to a maximum of 42 mg/g and the desorption ratio is 70%–80%. In 35 cycles, FeOOH shows a superior selectivity towards Pb 2+ compared with Co 2+ and Ni 2+ , with a purity of 97% ± 3% in the extracts. The high selectivity is attributed to the lower activation energy for Pb 2+ sorption. The capacity retentions at the 5 th and the 35 th cycles are ca. 80% and ca. 50%, respectively, comparable to the chemical regeneration method. With industrially exhausted granular ferric hydroxide as the electrode material, the system exhibits a Pb 2+ uptake capacity of 37.4 mg/g with high selectivity. Our work demonstrates the feasibility of regenerating FeOOH by charge and provides a new approach for recycling and upcycling FeOOH sorbent.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Persona of Transition Metal Ions in Solids: A Statistical Learning on Local Structures of Transition Metal Oxides

Abstract The local structure of a transition metal (TM) ion is a function of cation elements and valence states. More than that, in this work, by employing a trove of first‐principles data of TM oxides, the local structures of TM cations are statistically analyzed to extract detailed information about cation site preference, bond length, site structural distortion, and cation magnetization. It is found that cation radius alone poorly describes the local structure of a transition metal oxide, while the statistics of coordination number as well as the TMO bond length distribution, especially that of the 3d TMs, can provide comprehensive knowledge for understanding the behavior of TM elements. Based on these statistics, the interplay of site distortion due to the Jahn–Teller effect, cation site similarity, and a new set of ionic radii are all obtained to chart the “persona” of transition metal ions in solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydrogen Adsorption on Ordered and Disordered Pt-Ni Alloys

The bulk properties and chemical reactivity of disordered Pt-Ni alloys in the A1 ( fcc ) structure are investigated herein using different methods: Virtual Crystal Approximation (VCA), Korringa–Kohn–Rostoker Coherent Potential Approximation (KKR-CPA), and large explicit supercells generated using Super-Cell Random Approximates (SCRAPs). While VCA predicts lattice constants that closely follow Vegard’s law, the large supercells and KKR-CPA predict lattice constants that are consistently larger than Vegard’s law. KKR-CPA results closely agree with those from the large supercells for the disordered alloys, producing similar projected density of states and magnetic moment across the composition range. For instance, while VCA predicts the disordered alloys to be non-magnetic at a Pt concentration ( x Pt ) ≥ 0.5, KKR-CPA and SCRAPs predict the disordered alloys to remain ferromagnetic to higher Pt concentrations. As x Pt decreases, the adsorption of H becomes more exothermic on bulk-terminated (111) surfaces but less exothermic on Pt monolayer-terminated (111) surfaces due largely to strain effects. (111) surfaces cut from the large supercells predict average H adsorption energies on the disordered alloys similar to those on the ordered phases of the same compositions, while VCA predicts H adsorption to be more exothermic.

36 MATERIALS SCIENCE↗