Search NASA⌕ Search

Engineering topics

Zhang, Xiahui

Publications and source records attributed to Zhang, Xiahui.

Rationalizing nitrogen-doped secondary carbon particles for practical lithium-sulfur batteries

Nanostructured carbon host materials are widely used to improve both sulfur utilization rate and reaction kinetics in lithium-sulfur (Li-S) batteries. However, high complexity/cost of materials synthesis and difficulty in processing nano-materials into high-mass-loading electrodes are still significant barriers to the development of low-cost and high-energy Li-S batteries. In this study, we reported a generic and scalable synthesis approach to prepare nitrogen-doped secondary carbon particles. By using nitrogen-containing precursor as an integration reagent, the nanosized Ketjen Black particles were integrated into micron-size secondary ones and nitrogen-doped (NKB) simultaneously through a one-step heat treatment. With NKB as an example material, the effects of particle integration degree on the secondary particles’ structures, pore volume and connectivity, sulfur loading capability, and cell performance were studied and discussed. At an optimal integration condition, the NKB particles had significantly improved particle dimensions with well-maintained high specific surface area and pore volume. Here, contributed by the micron size and high pore volume, the NKB/S were successfully used for high-sulfur-loading cathodes (4–7 mg s /cm -2 ) and were able to deliver a specific capacity of ~1100 mAh g -1 at a low-porosity (50%) and lean-electrolyte conditions (E/S =4 µL/mg -1 ). Feasibility of the materials for practical use was validated through scaling up synthesis (40 g/batch), large-area electrode coating, and practical pouch cell (1.6 Ah) assembly and test.

25 ENERGY STORAGE↗

Deep eutectic solvent-based polymer electrolyte for solid-state lithium metal batteries

Poly(ethylene) oxide (PEO)-based electrolytes have been widely studied for solid-state lithium batteries while their ionic conductivity and lithium-ion transference number still need to be further improved. Herein, using the combined experimental and theoretical approach, we demonstrate a novel, solid-state PEO-deep eutectic solvent (DES) electrolyte for the first time. We found that the in situ formation of DES can reduce the crystallinity of PEO matrix and more Li + ions can move freely owing to the weakened coordination between ether oxygens and Li-ions. Besides, we show that more Li + ions can be dissociated from Li salts in PEO-DES electrolyte using the molecular dynamics simulations. Such liquid-free PEO-DES electrolytes showed good ionic conductivity (2.1 × 10 −4 S cm −1 ) which is 160% higher than that of conventional PEO-LiTFSI (8.1 × 10 −5 S cm −1 ) electrolyte at 60 °C. Additionally, the PEO-DES electrolyte showed 136% increase of Li-ion transference number (0.33) compared with ionic liquid-doped PEO-LiTFSI (0.14) at 60 °C. Moreover, the PEO-DES exhibited good compatibility with Li metal and stable Li plating/stripping behavior with little morphology change of Li metal. In conclusion, this research also provides new insights into the enhancement mechanisms of novel polymer electrolytes, improving our fundamental understanding of critical challenges that have impeded the adoption of solid-state lithium metal batteries.

Deep eutectic solvent↗

Controlled Synthesis of Sulfur-Rich Polymeric Selenium Sulfides as Promising Electrode Materials for Long-Life, High-Rate Lithium Metal Batteries

High-energy lithium/sulfur (Li/S) batteries still suffer from unsatisfactory cycle life and poor rate capability caused by the polysulfides shuttle and insulating nature of S cathodes. Here, we report our findings in the controlled synthesis of selenium (Se)-containing S-rich co-polymers of various compositions as novel cathode materials through a facile inverse vulcanization of S with selenium disulfide (SeS2) and 1,3- diisopropenylbenzene (DIB) as co-monomers. Nuclear magnetic resonance and X-ray photoelectron spectroscopy results show that divinyl functional groups of DIB were chemically cross-linked with S/SeS2 chain radicals through a ring-opening polymerization. The newly formed bonds of C-S, C-Se, and S-Se in novel S-SeS2-DIB copolymers effectively alleviate the shuttle effects of polysulfides/polyselenides. Furthermore, various electrochemical techniques confirm the positive roles of Secontaining co-polymers in enhancing the electrode reaction kinetics and the formation of stable solid electrolyte interphase layer with low charge-transfer resistance, leading to improved high-rate performances. The as-synthesized co-polymer was then infiltrated into well-interconnected, porous nanocarbon networks (Ketjenblack EC600JD, KB600) to provide effective paths for the fast electron transport. Due to the synergistic combination of chemical and physical confinement of the reaction intermediates during cycling, good reversibility for 500 cycles with a low decay rate of 0.0549% per cycle was achieved at 1000 mA g-1. These encouraging results suggest that the combination of chemical incorporation of SeS2 into S-rich co-polymer and the physical confinement of carbon networks is a promising strategy for advancing Li/S batteries and their viability for practical applications.

Dong, Panpan↗