Search NASA⌕ Search

Engineering topics

Zhang, Yongxin

Publications and source records attributed to Zhang, Yongxin.

Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes

Ni-rich layered oxides are the most promising cathodes for Li-ion batteries, but chemo-mechanical failures during cycling and large first-cycle capacity loss hinder their applications in high-energy batteries. Herein, by introducing spinel-like mortise-tenon structures into the layered phase of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), the adverse volume variations in cathode materials can be significantly suppressed. Meanwhile, these mortise-tenon structures play the role of the expressway for fast lithium-ion transport, which is substantiated by experiments and calculations. Moreover, the particles with mortise-tenon structures usually terminate with the most stable (003) facet. The new cathode exhibits a discharge capacity of 215 mAh g –1 at 0.1 C with an initial Coulombic efficiency of 97.5%, and capacity retention of 82.2% after 1200 cycles at 1 C. Importantly, this work offers a viable lattice engineering to address the stability and low initial Coulombic efficiency of the Ni-rich layered oxides, and facilitates the implementation of Li-ion batteries with high-energy density and long durability.

25 ENERGY STORAGE↗

High-Entropy Surface Complex Stabilized LiCoO 2 Cathode

In this study, elevating the charge voltage of LiCoO 2 increases the energy density of batteries, which is highly enticing in energy storage implementation ranging from portable electronics to e-vehicles. However, hybrid redox reactions at high voltages facilitate oxygen evolution, electrolyte decomposition and irreversible phase change, and accordingly lead to rapid battery capacity decay. Here significantly improved high-voltage cycling stability of Mg-Al-Eu co-doped LiCoO 2 is demonstrated. It is found that element co-doping induces a near-surface high-entropy zone, including an innately thin disordered rock-salt shell and a dopant segregation surface. The high-entropy complex can effectively suppress oxygen evolution and near-surface structure deconstruction. The phase change reversibility between O3 and H1-3 and thermal stability of the cathode are greatly enhanced as well. As a result, the co-doped LiCoO 2 exhibits a remarkable cycling performance, retaining 86.3% and 72.0% of initial capacity over 800 and 2000 cycles, respectively, with a high cut-off voltage of 4.6 V. The feasible co-doping approach broadens the perspective for the development of stable lithium-ion batteries with high operating voltages.

25 ENERGY STORAGE↗

Novel refractive index sensor based on fiber bragg grating in nano-bore optical fiber

In this paper, we propose a novel refractive index sensor with large dynamic range based on fiber Bragg grating in the nano-bore optical fiber. The spectral responses of grating on the filling index in the bore with different bore diameters and index ranges are numerically studied by the finite element method and coupled mode theory based transmission matrix method. It is found that the Bragg wavelength of grating is sensitive to the filling index in the bore. The influences of bore diameter on the wavelength sensitivity, resolution and dynamic range of the index sensor are analyzed. There exists a trade off between the linear dynamic range and sensitivity of index when the bore diameter varies. The optimized wavelength sensitivity and resolution of filling index are 53.6923 nm/index unit and 9.3123 × 10{sup −6} index under a linear index range of 1.0–1.4 using 2 µm bore diameter. The optimized linear dynamic range of index is 1.0–1.48 with wavelength sensitivity of 13.3056 nm/index unit and resolution of 3.7578 × 10{sup −5} index using 1 µm bore diameter. Our proposed index sensor has the technical advantages of simple all-fiber structure, large index range, and potential capability to synchronously detect index, temperature and strain.

36 MATERIALS SCIENCE↗

Role of structural anisotropy in geometric birefringence of high-birefringence index-guiding PCFs: analysis by moment of inertia

We have studied the role of structural anisotropy on the geometric birefringence of four typical high-birefringence (HB) index-guiding photonic crystal fibers (PCFs) with the same air-silica structure and circular, ellipse, and rectangle air holes, respectively. The normalized difference between the moment of inertia ΔI in x and y direction of the PCF structure is utilized to quantificationally describe the structural anisotropy. We demonstrate that the phase birefringence B increases monotonously when the normalized ΔI rises in different cases of PCFs structures. In order to obtain high birefringence B, it can be an effective method to optimize the parameters of the structure to increase the normalized ΔI. This work can be not only a reference of founding the essence of geometric birefringence and proposing the optimal design of HB-IG-PCFs, but also an enlightenment for bringing the different method (compared to the finite element) into the investigation of PCFs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High‐Frequency Intermittency in Observed and Model‐Simulated Precipitation

Abstract A newly reprocessed, bias‐corrected version of hourly satellite observations that provides global coverage of precipitation at high space‐time resolution is evaluated and compared with climate model simulations. Irregular subdaily fluctuations are the dominant component around the world, greater than variance of daily mean precipitation, and much greater than variance associated with the mean diurnal cycle of precipitation. Irregular subdaily fluctuations of precipitation are severely underestimated by models, even after taking into account the observational “error bars” implied by different space‐time resolutions. Variance of daily mean precipitation is less severely underestimated. Although mean diurnal cycle amplitudes vary among the models, this component is but a small part of total precipitation variance. Therefore, the total precipitation variance is significantly underestimated by models in general. Further exploration of model‐data discrepancies in precipitation at high‐time frequency may lead to new and useful climate model diagnostics.

54 ENVIRONMENTAL SCIENCES↗

Hurricane Harvey Links to Ocean Heat Content and Climate Change Adaptation

Abstract While hurricanes occur naturally, human‐caused climate change is supercharging them and exacerbating the risk of major damage. Here using ocean and atmosphere observations, we demonstrate links between increased upper ocean heat content due to global warming with the extreme rainfalls from recent hurricanes. Hurricane Harvey provides an excellent case study as it was isolated in space and time. We show that prior to the beginning of northern summer of 2017, ocean heat content was the highest on record both globally and in the Gulf of Mexico, but the latter sharply decreased with hurricane Harvey via ocean evaporative cooling. The lost ocean heat was realized in the atmosphere as moisture, and then as latent heat in record‐breaking heavy rainfalls. Accordingly, record high ocean heat values not only increased the fuel available to sustain and intensify Harvey but also increased its flooding rains on land. Harvey could not have produced so much rain without human‐induced climate change. Results have implications for the role of hurricanes in climate. Proactive planning for the consequences of human‐caused climate change is not happening in many vulnerable areas, making the disasters much worse.

54 ENVIRONMENTAL SCIENCES↗

How Often Does It Really Rain?

The perception about whether a place is a nice place to live often depends on how often it rains (or snows). The frequency relates to how dreary the weather appears, and it is the duration much more than the amount that clouds perceptions. Yet, information about the frequency of rainfall, or precipitation in general, is spotty at best. In this paper, we analyze a new near-global (60°N–60°S) dataset at hourly time scales and 0.25° resolution. The dataset, the newly calibrated Climate Prediction Center morphing technique (CMORPH), enables comparison of results with 3-hourly and daily data, which is what has previously been available, and seasonal aspects are also examined. The results are quite sensitive to both the spatial scales of the data and their temporal resolutions, and it is important to get down to hourly values to gain a proper appreciation of the true frequency. At 1° resolution, values are 35% higher than for 0.25°. At 3-hourly resolution, they are about 25% higher than hourly, and at daily resolution, they are about 150% higher than hourly on average. Overall, near-global (60°N–60°S) precipitation occurs 11.0% ± 1.1% (1 sigma) of the time or, alternatively, 89.0% of the time it is not precipitating. But outside of the intertropical and South Pacific convergence zones, where values exceed 30%, and the arid and desert regions, where values are below 4%, the rates are more like 10% or so, and over land where most people live, values are closer to about 8%.

54 ENVIRONMENTAL SCIENCES↗

Intermittency in Precipitation: Duration, Frequency, Intensity, and Amounts Using Hourly Data

Abstract Intermittency is a core characteristic of precipitation, not well described by data and very poorly modeled. Detailed analyses are made of near-global gridded (about 1°) hourly or 3-hourly precipitation rates from two updated observational datasets [3-hourly TRMM 3B42, version 7, and hourly CMORPH, version 1.0, bias corrected (CRT)] and from special runs of CESM from January 1998 to December 2013 to obtain hourly values. The analyses explore the intermittency of precipitation: the frequency, intensity, duration, and amounts. A comparison is made for all products using several metrics with a focus on the duration of events, and a new metric is proposed based on the ratio of the frequency of precipitation at certain rates (0.2–2 mm h−1) for hourly versus 3-hourly versus daily data. For all seasons and rain rates, TRMM values are similar in pattern to CMORPH, but durations are about 80%–85%. It is mainly over land in the monsoons that CMORPH exceeds TRMM rain durations. Observed duration of precipitation events in CMORPH over oceans are 12–15 h in the tropics and subtropics, much less than the ~20 h for CESM. Hence, the observational results differ somewhat but both are considerably different from the model, which has too much precipitation overall, and it precipitates far too often at low rates and not enough for intense rates, with the divide about 1–2 mm h−1. There is a need to properly represent precipitation phenomena and processes either explicitly or implicitly (parameterized).

54 ENVIRONMENTAL SCIENCES↗

Relationships among top‐of‐atmosphere radiation and atmospheric state variables in observations and CESM

Abstract A detailed examination is made in both observations and the Community Earth System Model (CESM) of relationships among top‐of‐atmosphere radiation, water vapor, temperatures, and precipitation for 2000–2014 to assess the origins of radiative perturbations and climate feedbacks empirically. The 30‐member large ensemble coupled runs are analyzed along with one run with specified sea surface temperatures for 1994 to 2005 (to avoid volcanic eruptions). The vertical structure of the CESM temperature profile tends to be top heavy in the model, with too much deep convection and not enough lower stratospheric cooling as part of the response to tropospheric heating. There is too much absorbed solar radiation (ASR) over the Southern Oceans and not enough in the tropics, and El Niño–Southern Oscillation (ENSO) is too large in amplitude in this version of the model. However, the covariability of monthly mean anomalies produces remarkably good replication of most of the observed relationships. There is a lot more high‐frequency variability in radiative fluxes than in temperature, highlighting the role of clouds and transient weather systems in the radiation statistics. Over the Warm Pool in the tropical western Pacific and Indian Oceans, where nonlocal effects from the Walker circulation driven by the ENSO events are important, several related biases emerge: in response to high SST anomalies there is more precipitation, water vapor, and cloud and less ASR and outgoing longwave radiation in the model than observed. Different model global mean trends are evident, however, possibly hinting at too much positive cloud feedback in the model.

Trenberth, Kevin E.↗

Changes in Moisture Flux over the Tibetan Plateau during 1979-2011: Insights from a High Resolution Simulation

Net precipitation (precipitation minus evapotranspiration, P-E) changes between 1979 and 2011 from a high resolution regional climate simulation and its reanalysis forcing are analyzed over the Tibet Plateau (TP) and compared to the global land data assimilation system (GLDAS) product. The high resolution simulation better resolves precipitation changes than its coarse resolution forcing, which contributes dominantly to the improved P-E change in the regional simulation compared to the global reanalysis. Hence, the former may provide better insights about the drivers of P-E changes. The mechanism behind the P-E changes is explored by decomposing the column integrated moisture flux convergence into thermodynamic, dynamic, and transient eddy components. High-resolution climate simulation improves the spatial pattern of P-E changes over the best available global reanalysis. High-resolution climate simulation also facilitates new and substantial findings regarding the role of thermodynamics and transient eddies in P-E changes reflected in observed changes in major river basins fed by runoff from the TP. The analysis revealed the contrasting convergence/divergence changes between the northwestern and southeastern TP and feedback through latent heat release as an important mechanism leading to the mean P-E changes in the TP.

high resolution simulation↗

Climate variability and relationships between top‐of‐atmosphere radiation and temperatures on Earth

Abstract The monthly global and regional variability in Earth's radiation balance is examined using correlations and regressions between atmospheric temperatures and water vapor with top‐of‐atmosphere outgoing longwave (OLR), absorbed shortwave (ASR), and net radiation ( R T = ASR − OLR). Anomalous global mean monthly variability in the net radiation is surprisingly large, often more than ±1 W m −2 , and arises mainly from clouds and transient weather systems. Relationships are strongest and positive between OLR and temperatures, especially over land for tropospheric temperatures, except in the deep tropics where high sea surface temperatures are associated with deep convection, high cold cloud tops and thus less OLR but also less ASR. Tropospheric vertically averaged temperatures (surface = 150 hPa) are thus negatively correlated globally with net radiation (−0.57), implying 2.18 ± 0.10 W m −2 extra net radiation to space for 1°C increase in temperature. Water vapor is positively correlated with tropospheric temperatures and thus also negatively correlated with net radiation; however, when the temperature dependency of water vapor is statistically removed, a significant positive feedback between water vapor and net radiation is revealed globally with 0.87 W m −2 less OLR to space per millimeter of total column water vapor. The regression coefficient between global R T and tropospheric temperature becomes −2.98 W m −2 K −1 if water vapor effects are removed, slightly less than expected from blackbody radiation (−3.2 W m −2 K −1 ), suggesting a positive feedback from clouds and other processes. Robust regional structures provide additional physical insights. The observational record is too short, weather noise too great, and forcing too small to make reliable estimates of climate sensitivity.

Trenberth, Kevin E.↗

Regional Climate Model Projections for the State of Washington

Global climate models do not have sufficient spatial resolution to represent the atmospheric and land surface processes that determine the unique regional heterogeneity of the climate of the State of Washington. If future large-scale weather patterns interact differently with the local terrain and coastlines than current weather patterns, local changes in temperature and precipitation could be quite different from the coarse-scale changes projected by global models. Regional climate models explicitly simulate the interactions between the large-scale weather patterns simulated by a global model and the local terrain. We have performed two 100-year climate simulations using the Weather and Research Forecasting (WRF) model developed at the National Center for Atmospheric Research (NCAR). One simulation is forced by the NCAR Community Climate System Model version 3 (CCSM3) and the second is forced by a simulation of the Max Plank Institute, Hamburg, global model (ECHAM5). The mesoscale simulations produce regional changes in snow cover, cloudiness, and circulation patterns associated with interactions between the large-scale climate change and the regional topography and land-water contrasts. These changes substantially alter the temperature and precipitation trends over the region relative to the global model result or statistical downscaling. To illustrate this effect, we analyze the changes from the current climate (1970-1999) to the mid 21st century (2030-2059). Changes in seasonal-mean temperature, precipitation, and snowpack are presented. Several climatological indices of extreme daily weather are also presented: precipitation intensity, fraction of precipitation occurring in extreme daily events, heat wave frequency, growing season length, and frequency of warm nights. Despite somewhat different changes in seasonal precipitation and temperature from the two regional simulations, consistent results for changes in snowpack and extreme precipitation are found in both simulations.

54 ENVIRONMENTAL SCIENCES↗