Electromagnetic Interference Filter Design for a 100 kW Silicon Carbide Photovoltaic Inverter Without Switching Harmonics Filter
Not provided.
Automation & Control Systems↗
Engineering topics
Zhang, Yu
Publications and source records attributed to Zhang, Yu.
Multi-species temperature and number density analysis of a laser-produced plasma using dual-comb spectroscopy
Dual-comb spectroscopy (DCS) represents a novel method of using absorption spectroscopy as a diagnostic tool for multispecies analysis of excitation temperatures and column densities in laser-produced plasmas (LPPs). DCS was performed on a LPP generated by ablating a multielement alloy containing Nd, Gd, and Fe. Transitions from all three elements were observed in absorption spectra measured from 530.08 to 535.19 nm at seven time-delays from 31 to 250 μs after ablation. The spectra were fit using a nonlinear regression algorithm to determine peak areas, and excitation temperatures and column densities were determined for the three atomic species separately using Boltzmann plots. The measured excitation temperatures of Nd I and Gd I showed good agreement at all time-delays, whereas the Fe I temperature was found to be higher, and the ratios between the column densities varied with delay. The observations are understood via effects of LPP spatial averaging, elemental fractionation, and molecular formation and are compared and contextualized with previous work studying LPPs using other spectroscopic techniques. A brief discussion of the precision and accuracy of the determined excitation temperatures and column densities is also presented.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Shade triggers posttranscriptional PHYTOCHROME-INTERACTING FACTOR-dependent increases in H3K4 trimethylation
The phytochrome (phy)-PHYTOCHROME-INTERACTING FACTOR (PIF) sensory module perceives and transduces light signals to direct target genes (DTGs), which then drive the adaptational responses in plant growth and development appropriate to the prevailing environment. These signals include the first exposure of etiolated seedlings to sunlight upon emergence from subterranean darkness and the change in color of the light that is filtered through, or reflected from, neighboring vegetation (“shade”). Previously, we identified three broad categories of rapidly signal-responsive genes: those repressed by light and conversely induced by shade; those repressed by light, but subsequently unresponsive to shade; and those responsive to shade only. Here, we investigate the potential role of epigenetic chromatin modifications in regulating these contrasting patterns of phy-PIF module-induced expression of DTGs in Arabidopsis (Arabidopsis thaliana). Using RNA-seq and ChIP-seq to determine time-resolved profiling of transcript and histone 3 lysine 4 trimethylation (H3K4me3) levels, respectively, we show that, whereas the initial dark-to-light transition triggers a rapid, apparently temporally coincident decline of both parameters, the light-to-shade transition induces similarly rapid increases in transcript levels that precede increases in H3K4me3 levels. Together with other recent findings, these data raise the possibility that, rather than being causal in the shade-induced expression changes, H3K4me3 may function to buffer the rapidly fluctuating shade/light switching that is intrinsic to vegetational canopies under natural sunlight conditions.
59 BASIC BIOLOGICAL SCIENCES↗
Toward a QUBO-Based Density Matrix Electronic Structure Method
Density matrix electronic structure theory is used in many quantum chemistry methods to “alleviate” the computational cost that arises from directly using wave functions. Although density matrix based methods are computationally more efficient than wave function based methods, significant computational effort is involved. Because the Schrödinger equation needs to be solved as an eigenvalue problem, the time-to-solution scales cubically with the system size in mean-field type approaches such as Hartree–Fock and density functional theory and is solved as many times in order to reach charge or field self-consistency. We hereby propose and study a method to compute the density matrix by using a quadratic unconstrained binary optimization (QUBO) solver. This method could be useful to solve the problem with quantum computers and, more specifically, quantum annealers. Our proposed approach is based on a direct construction of the density matrix using a QUBO eigensolver. We explore the main parameters of the algorithm focusing on precision and efficiency. We show that, while direct construction of the density matrix using a QUBO formulation is possible, the efficiency and precision have room for improvement. Moreover, calculations performed with quantum annealing on D-Wave’s new Advantage quantum computer are compared with results obtained with classical simulated annealing, further highlighting some problems of the proposed method. Finally, we also suggest alternative methods that could lead to a more efficient QUBO-based density matrix construction.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Impact of Coastal Marsh Eco‐Geomorphologic Change on Saltwater Intrusion Under Future Sea Level Rise
Abstract Coastal saltwater intrusion (SWI) is one key factor that affects the hydrology, ecology, and biogeochemistry of coastal ecosystems. Future climate change, especially intensified sea level rise (SLR), is expected to trigger SWI to encroach on coastal freshwater aquifers more intensively. Numerous studies have investigated decadal/century scale SWI under SLR by assuming a static coastal landscape topography. However, coastal landscapes are highly dynamic in response to SLR, and the impact of coastal landscape evolution on SWI has received very little attention. Thus, this study used a coastal marsh landscape as an example and investigated how coastal marsh evolution affects future SWI with a physically‐based coastal hydro‐eco‐geomorphologic model, Advanced Terrestrial Simulator. Our numerical experiments showed that it is very likely that the marsh elevation increases with future SLR due to sediment deposition, and a depression zone is formed due to different marsh accretion rates between the ocean boundary and the inland. We found that marsh accretion may significantly reduce the surface saltwater inflow at the ocean boundary, and the evolved topographic depression zone may prolong the residence time of surface ponded saltwater, affecting subsurface salinity distribution differently. We also predicted that marshlands may become more sensitive to upland freshwater supply under future SLR, compared with previous predictions without marsh evolution. This study demonstrates the importance of coastal evolution to coastal freshwater‐saltwater interaction. The eco‐geomorphologic effect may not be ignored when evaluating coastal SWI under SLR at decadal or century scales.
54 ENVIRONMENTAL SCIENCES↗
Thermoelectric coolers for high-power-density 3D electronics heat management
Future advancements in three-dimensional (3D) electronics require robust thermal management methodology. Thermoelectric coolers (TECs) are reliable and solid-state heat pumping devices with high cooling capacity that can meet the requirements of emerging 3D microelectronic devices. In this work, we first provide the design of TECs for electronics cooling using a computational model and then experimentally validate the main predictions. Key device parameters such as device thickness, leg density, and contact resistance were studied to understand their influence on the performance of TECs. Our results show that it is possible to achieve high cooling power density through optimization of TE leg height and packing density. Scaling of TECs is shown to provide ultra-high cooling power density.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
A phase 2 study of sorafenib combined with conventional therapies in refractory central nervous system leukemia
Background Patients with refractory central nervous system leukemia (CNSL) have a dismal prognosis and lack effective therapy. Case reports have shown that sorafenib is effective against brain metastases, including leukemia. Methods To explore the efficacy of sorafenib combined with conventional therapies for refractory CNSL, a phase 2 study was conducted. The primary end point was the complete remission rate (CRR) within 8 weeks of treatment. Secondary end points included the overall response rate (ORR), event‐free survival (EFS), overall survival (OS), and adverse events (AEs). Results Twenty‐six patients with refractory CNSL were enrolled; they included 17 with isolated CNSL, 7 with hematological relapse, and 2 with another extramedullary relapse. After 8 weeks of treatment, 21 patients achieved complete remission, 2 achieved partial remission, and 3 achieved no remission for a CRR of 80.8% (95% CI, 62.1%‐91.5%) and an ORR of 88.5% (95% CI, 71.0%‐96.0%). Twenty patients survived, and 6 died. The 2‐year EFS and OS rates were 75.0% (95% CI, 54.5%‐88.3%) and 76.9% (95% CI, 54.2%‐90.4%), respectively. Six patients experienced grade 3 or 4 treatment‐related AEs, including moderate chronic graft‐vs‐host disease (n = 3), grade 3 or 4 acute graft‐vs‐host disease (n = 2), and grade 3 skin rash (n = 1). No treatment‐related deaths occurred during the therapy of refractory CNSL. Conclusions Sorafenib combined with conventional therapies is effective and safe for refractory CNSL. Lay Summary Sorafenib combined with conventional therapies is effective and safe for refractory central nervous system leukemia.
Chen, Xiaoxia↗
Estimating cluster masses from SDSS multiband images with transfer learning
ABSTRACT The total masses of galaxy clusters characterize many aspects of astrophysics and the underlying cosmology. It is crucial to obtain reliable and accurate mass estimates for numerous galaxy clusters over a wide range of redshifts and mass scales. We present a transfer-learning approach to estimate cluster masses using the ugriz-band images in the SDSS Data Release 12. The target masses are derived from X-ray or SZ measurements that are only available for a small subset of the clusters. We designed a semisupervised deep learning model consisting of two convolutional neural networks. In the first network, a feature extractor is trained to classify the SDSS photometric bands. The second network takes the previously trained features as inputs to estimate their total masses. The training and testing processes in this work depend purely on real observational data. Our algorithm reaches a mean absolute error (MAE) of 0.232 dex on average and 0.214 dex for the best fold. The performance is comparable to that given by redMaPPer, 0.192 dex. We have further applied a joint integrated gradient and class activation mapping method to interpret such a two-step neural network. The performance of our algorithm is likely to improve as the size of training data set increases. This proof-of-concept experiment demonstrates the potential of deep learning in maximizing the scientific return of the current and future large cluster surveys.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Generation of intense phase-stable femtosecond hard X-ray pulse pairs
Significance The generation of phase-stable femtosecond X-ray pulse pairs will advance nonlinear spectroscopies and imaging, providing direct insight into the coupled motions of electrons and nuclei with resolution on the electronic length scale and timescale. This paper presents the generation of such pulse pairs in the X-ray domain. The approach uses X-ray free-electron laser pulses to induce highly directional, intense, phase-stable pairs of superfluorescence and seeded stimulated emission at the 5.9 keV manganese Kα 1 line. The finding is evidenced by strong interference fringes in the superfluorescence and stimulated emission signals.
43 PARTICLE ACCELERATORS↗
Impact of coastal marsh eco-geomorphologic change on the prediction of saltwater intrusion under future sea level rise
Explore the source record for details and available documents.
coastal geomorphology, saltwater intrusion, sea le↗
Detecting Coastal Wetland Degradation by Combining Remote Sensing and Hydrologic Modeling
Sea-level rise and climate change stresses pose increasing threats to coastal wetlands that are vital to wildlife habitats, carbon sequestration, water supply, and other ecosystem services with global significance. However, existing studies are limited in individual sites, and large-scale mapping of coastal wetland degradation patterns over a long period is rare. Our study developed a new framework to detect spatial and temporal patterns of coastal wetland degradation by analyzing fine-scale, long-term remotely sensed Normalized Difference Vegetation Index (NDVI) data. Then, this framework was tested to track the degradation of coastal wetlands at the Alligator River National Wildlife Refuge (ARNWR) in North Carolina, United States, during the period from 1995 to 2019. We identified six types of coastal wetland degradation in the study area. Most of the detected degradation was located within 2 km from the shoreline and occurred in the past five years. Further, we used a state-of-the-art coastal hydrologic model, PIHM-Wetland, to investigate key hydrologic processes/variables that control the coastal wetland degradation. The temporal and spatial distributions of simulated coastal flooding and saltwater intrusion confirmed the location and timing of wetland degradation detected by remote sensing. The combined method also quantified the possible critical thresholds of water tables for wetland degradation. The remote sensing–hydrologic model integrated scheme proposed in this study provides a new tool for detecting and understanding coastal wetland degradation mechanisms. Our study approach can also be extended to other coastal wetland regions to understand how climate change and sea-level rise impact wetland transformations.
54 ENVIRONMENTAL SCIENCES↗
A Van der Waals Interface Hosting Two Groups of Magnetic Skyrmions
Multiple magnetic skyrmion phases add an additional degree of freedom for skyrmion-based ultrahigh-density spin memory devices. Extending the field to 2D van der Waals magnets is a rewarding challenge, where the realizable degree of freedoms (e.g., thickness, twist angle, and electrical gating) and high skyrmion density result in intriguing new properties and enhanced functionality. In this work, a van der Waals interface, formed by two 2D ferromagnets Cr 2 Ge 2 Te 6 and Fe 3 GeTe 2 with a Curie temperature of ≈65 and ≈205 K, respectively, hosting two groups of magnetic skyrmions, is reported. Two sets of topological Hall effect signals are observed below 6s0 K when Cr 2 Ge 2 Te 6 is magnetically ordered. These two groups of skyrmions are directly imaged using magnetic force microscopy, and supported by micromagnetic simulations. Interestingly, the magnetic skyrmions persist in the heterostructure with zero applied magnetic field. The results are promising for the realization of skyrmionic devices based on van der Waals heterostructures hosting multiple skyrmion phases.
2D magnetism↗
GalR, GalX and AraR co-regulate $\tiny {D}$-galactose and $\tiny{L}$-arabinose utilization in Aspergillus nidulans
Filamentous fungi produce a wide variety of enzymes in order to efficiently degrade plant cell wall polysaccharides. The production of these enzymes is controlled by transcriptional regulators, which also control the catabolic pathways that convert the released monosaccharides. Two transcriptional regulators, GalX and GalR, control d-galactose utilization in the model filamentous fungus Aspergillus nidulans, while the arabinanolytic regulator AraR regulates l-arabinose catabolism. d-Galactose and l-arabinose are commonly found together in polysaccharides, such as arabinogalactan, xylan and rhamnogalacturonan I. Therefore, the catabolic pathways that convert d-galactose and l-arabinose are often also likely to be active simultaneously. In this study, we investigated the interaction between GalX, GalR and AraR in d-galactose and l-arabinose catabolism. For this, we generated single, double and triple mutants of the three regulators, and analysed their growth and enzyme and gene expression profiles. Our results clearly demonstrated that GalX, GalR and AraR co-regulate d-galactose catabolism in A. nidulans. GalX has a prominent role on the regulation of genes of d-galactose oxido-reductive pathway, while AraR can compensate for the absence of GalR and/or GalX.
59 BASIC BIOLOGICAL SCIENCES↗
Chromatin Changes in Phytochrome Interacting Factor-Regulated Genes Parallel Their Rapid Transcriptional Response to Light
As sessile organisms, plants must adapt to a changing environment, sensing variations in resource availability and modifying their development in response. Light is one of the most important resources for plants, and its perception by sensory photoreceptors (e.g., phytochromes) and subsequent transduction into long-term transcriptional reprogramming have been well characterized. Chromatin changes have been shown to be involved in photomorphogenesis. However, the initial short-term transcriptional changes produced by light and what factors enable these rapid changes are not well studied. Here, we define rapidly light-responsive, Phytochrome Interacting Factor (PIF) direct-target genes (LRP-DTGs). We found that a majority of these genes also show rapid changes in Histone 3 Lysine-9 acetylation (H3K9ac) in response to the light signal. Detailed time-course analysis of transcript and chromatin changes showed that, for light-repressed genes, H3K9 deacetylation parallels light-triggered transcriptional repression, while for light-induced genes, H3K9 acetylation appeared to somewhat precede light-activated transcript accumulation. However, direct, real-time imaging of transcript elongation in the nucleus revealed that, in fact, transcriptional induction actually parallels H3K9 acetylation. Collectively, the data raise the possibility that light-induced transcriptional and chromatin-remodeling processes are mechanistically intertwined. Histone modifying proteins involved in long term light responses do not seem to have a role in this fast response, indicating that different factors might act at different stages of the light response. This work not only advances our understanding of plant responses to light, but also unveils a system in which rapid chromatin changes in reaction to an external signal can be studied under natural conditions.
59 BASIC BIOLOGICAL SCIENCES↗
Detailed analysis of the D-galactose catabolic pathways in Aspergillus niger reveals complexity at both metabolic and regulatory level
The current impetus towards a sustainable bio-based economy has accelerated research to better understand the mechanisms through which filamentous fungi convert plant biomass, a valuable feedstock for biotechnological applications. Several transcription factors have been reported to control the polysaccharide degradation and metabolism of the resulting sugars in fungi. However, little is known about their individual contributions, interactions and crosstalk. D-galactose is a hexose sugar present mainly in hemicellulose and pectin in plant biomass. Here, we study D-galactose conversion by Aspergillus niger and describe the involvement of the arabinanolytic and xylanolytic activators AraR and XlnR, in addition to the D-galactose-responsive regulator GalX. Our results deepen the understanding of the complexity of the filamentous fungal regulatory network for plant biomass degradation and sugar catabolism, and facilitate the generation of more efficient plant biomass-degrading strains for biotechnological applications.
59 BASIC BIOLOGICAL SCIENCES↗
Structural and mechanistic basis of reiterative transcription initiation
Explore the source record for details and available documents.
Liu, Yu↗
Enhanced Light Outcoupling from OLEDs Fabricated on Novel Low-Cost Patterned Plastic Substrates of Varying Periodicity
OLEDs continue to make strides in display applications, but their commercial utilization in solid-state lighting (SSL) is lagging. An ongoing challenge, in particular for manufacturing, is the need for enhanced efficiency and hence the necessity to increase in an inexpensive approach the extraction of the light generated inside the OLED into the forward (viewing) hemisphere. In conventional OLEDs fabricated on a transparent flat anode coated on glass, the external quantum efficiency (EQE) is only ~20%. About 50% of the light is lost to internal waveguiding in the high refractive index (RI) organic + ITO anode layers and to surface plasmon polaritons (SPPs) at the organic/metal cathode interface. Another ~30% of the light is externally waveguided in the substrate to its edges. While extraction of the externally waveguided light is commonly addressed by adding a microlens array (MLA) or a scattering layer at the substrate’s air-side, light outcoupling increases by only ~1.6-1.7x (vs up to 2.5x in improving from ~20% to ~50%). The use of a hemispherical lens or an index matching fluid (IMF) at the substrate/photodetector (PD) interface increases the outcoupling by at least 2x; these approaches however, are not viable industrially, and even a MLA is sometimes undesirable due to its non-planar, scattering structure. In multi-stack tandem OLEDs, where the metal cathode is far from the emitting zone(s), the impact of photons loss to SPPs decreases. Our project addressed the ~50% loss to the internally waveguided light and SPPs. We evaluated OLEDs fabricated on patterned or planarized plastic substrates manufactured in a cost-effective approach compatible with a roll-to-roll (R2R) process. The OLEDs were either (i) patterned to various degrees depending on the pitch a and height or depth h of the pattern features or (ii) planar, with a pattern buried under a flat high RI planarization layer. We demonstrated that the outcoupling from green patterned OLEDs reaches ~50% by mitigating plasmon–related loss and internal waveguiding, even without the addition of a MLA, a hemispherical lens, or IMF. Simulations conducted in parallel with the experimental effort demonstrated how diffraction by conformally corrugated OLEDs increases the outcoupling to >60%. Structures with varying pitch values were also simulated indicating that combining domains of varying pitch could increase outcoupling to 55-60%. Experimentally, we additionally assessed the role a and h in determining not only the OLED efficiencies, but also their structural properties, i.e., the uniformity and conformality throughout the OLED stack. As planar OLEDs are preferred over corrugated devices, we studied different patterns in plastic substrates that were planarized by a high RI formulation. Planar green OLEDs on such structures showed enhanced efficiencies with EQEs larger than 60% with the addition of an IMF (to extract the substrate mode) at the substrate/Si PD interface. White OLEDs showed EQEs of 45.5%. Plastic substrates are currently less attractive than glass substrates due to drawbacks such as permeability to water vapor and oxygen, and in some cases thermal instability. Plastic substrates however, are flexible and easy to handle unlike thin flexible glass, and once transparent thin barrier films are available, they will become more attractive; they are already of interest in medical applications. Importantly, as it is easy to generate various patterns in different plastic materials, they provide excellent means for assessing and optimizing enhancing extracting structures. Such structures can also be transferred to glass substrates with some process modifications. The technical effectiveness and economic feasibility of the project lie in the patterning of the extracting plastic substrates in an approach that is scalable to R2R manufacturing. R2R processes are of drastically lower-cost than batch or single-unit fabrication. The patterned plastic can be a part of an integrated substrate either plastic or glass, which includes also a MLA or a planar layer with embedded scattering particles, as well as a conductive metal mesh/electrode design. SSL is environmentally-friendly and as OLED SSL becomes more efficient it will reduce electricity consumption, and hence lighting cost, as well as produce less expensive attractive lighting fixtures. Our university-industry collaboration is hence of major benefit to the public as it demonstrates the feasibility of manufacturing optimized extracting substrates for highly efficient OLEDs for SSL in a future R2R process, which would drastically reduce the manufacturing cost and increase production in the USA. Moreover, newly developed methods by our team allow low-cost roll manufactured substrates to be transferred to flexible or rigid glass substrates, which solves the plastic substrate barrier issues, and when combined with device encapsulation will increase the OLEDs’ environmental stability.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗