Engineering topics
Publications and source records attributed to Zhang, Yu.
The LMCT photosensitizer Zr( Mes PDP Ph ) 2 paired with DPA-based acceptors enabled low power threshold photochemical upconversion with record-setting quantum efficiencies.
The oscillator strengths of 43 transitions of neutral gadolinium from 530 to 535 nm were determined based on high-resolution absorption spectra measured by probing a laser-produced plasma (LPP) using time-resolved dual-comb spectroscopy (DCS). Absorption spectra were measured at various time delays, ranging from 33 to 252 µs after the onset of the plasma formation, over which the temperature and number density varied as the ablation plume evolved. A Boltzmann analysis was used to determine the excitation temperature and column density of Gd in the ablation plume, based on measured absorption from 20 Gd I spectral lines with known oscillator strengths. Oscillator strengths were then determined for additional dipole-allowed Gd I transitions identified in the absorption spectra, 19 of which were previously unreported. Oscillator strengths of all measured transitions were compared with literature values when available and show good agreement in most cases. Time-resolved measurement of atomic absorption in the cooling plasma provides access to a range of excitation temperatures and optical densities for the atoms in the ablation plume, allowing repeated measurements under different conditions, thereby improving confidence in the results. The high spectral bandwidth and resolution capabilities of DCS make it well-suited to measuring the dense optical spectrum of Gd, and the technique is applicable to other elements, especially lanthanides and actinides.
Resonant stimulated X-ray Raman spectroscopy of the bimetallic [Mn III Mn IV (μ-O) 2 (μ-OAC)(tacn) 2 ] 2+ manganese complex is investigated in a simulation study. A pump–probe sequence of resonant X-ray Raman excitations is employed to generate and monitor valence-electron wave packets at selected regions in the molecule, by exploiting element specific core-excited states. A two-color protocol is presented, with pump and probe pulses tuned to the Mn and N K-edges. A natural orbital decomposition allows the visualization of the electron dynamics underlying the signal.
We apply an intense infrared laser pulse in order to perturb the electronic and vibrational states in the three-dimensional charge density wave material 1T-VSe 2 . Ultrafast snapshots of the light-induced hot carrier dynamics and nonequilibrium quasiparticle spectral function are collected using time- and angle-resolved photoemission spectroscopy. Furthermore, the hot carrier temperature and time-dependent electronic self-energy are extracted from the time-dependent spectral function, revealing that incoherent electron-phonon interactions heat the lattice above the charge density wave critical temperature on a timescale of (200 ± 40) fs. Density functional perturbation theory calculations establish that the presence of hot carriers alters the overall phonon dispersion and quenches efficient low-energy acoustic phonon scattering channels, which results in a new quasiequilibrium state that is experimentally observed.
Here we report direct measurements via angle-resolved photoemission spectroscopy (ARPES) of the electronic dispersion of single-layer (SL) CoO 2 . The Fermi contour consists of a large hole pocket centered at the $\overline{\Gamma}$ point. To interpret the ARPES results, we use density functional theory (DFT) in combination with the multi-orbital Gutzwiller Approximation (DFT+GA), basing our calculations on crystalline structure parameters derived from x-ray photoelectron diffraction and low-energy electron diffraction. Our calculations are in good agreement with the measured dispersion. We conclude that the material is a moderately correlated metal. We also discuss substrate effects, and the influence of hydroxylation on the CoO 2 SL electronic structure.
A design optimization campaign was conducted to search for improved combustion profiles that enhance gasoline compression ignition in a heavy-duty diesel engine with a geometric compression ratio of 17.3. A large-scale design of experiments approach was used for the optimization, employing three-dimensional computational fluid dynamics simulations. The main parameters explored include geometric features, injector specifications, and swirl motion. Both stepped-lip and re-entrant bowls were included in order to assess their respective performance implications. A total of 256 design candidates were prepared using the software package CAESES for automated and simultaneous geometry generation and combustion recipe perturbation. The design optimization was conducted for three engine loads representing light to medium load conditions. The design candidates were evaluated for fuel efficiency, emissions, fuel-air mixing, and global combustion behavior. Simulation results showed that the optimum designs were all stepped-lip bowls, due to improvements in fuel-air mixing, as well as reduced heat loss and emissions formation. Improvements in indicated specific fuel consumption of up to 3.2% were achieved while meeting engine-out NOx emission targets of 1-1.5 g/kW center dot h. Re-entrant bowls performed worse compared to the baseline design, and significant performance variations occurred across the load points. Specifically, the re-entrant bowls were on par with the stepped-lip bowls under light load conditions, but significant deteriorations occurred under higher load conditions. As a final task, selected optimized designs were then evaluated under full-load conditions.
The recently developed ab-initio multiple cloning (AIMC) approach based on the multicongurational Ehrenfest (MCE) method provides a powerful and accurate way of describing the excited-state dynamics of molecular systems. The AIMC method is a controlled approximation to non-adiabatic dynamics with a particular strength in the proper description of decoherence effects due to branching of vibrational wavepackets at a level crossing. In this work, we report a new implementation of the AIMC algorithm in the open source NWChem computational chemistry program. The framework combines linear-response time-dependent density functional theory with Ehrenfest mean-eld theory to determine the equations of motion for classical trajectories. The multi-dimensional wave function is decomposed into a superposition of Gaussian coherent states guided by Ehrenfest trajectories (i.e., MCE approach), which can clone with fully quantum mechanical amplitudes and phases. By using an efficient time-derivative based non-adiabatic coupling approach within the AIMC method, all observable are calculated on-the-y in the non-adiabatic molecular dynamics process. As a representative example, we apply our implementation to study the ultrafast photoinduced electronic and vibrational energy transfer in a pyridine molecule. The effects of the cloning procedure on electronic and vibrational coherence, relaxation and unidirectional energy transfer are discussed. This new AIMC implementation provides a high-level non-adiabatic molecular dynamics framework for simulating photoexcited dynamics in complex molecular systems and experimentally relevant ultrafast spectroscopic probes, such as nonlinear coherent optical and X-ray signals.
We experimentally investigated several intra-molecular coordinate and environmental changes as potential causes of single-molecule fluorescence spectral heterogeneities (smFSH). Here, we developed a high-throughput single-molecule spectroscopy technique to analyze more than 5,000 single-molecule emission spectra from each of nine commonly used fluorophores with different structural rigidities deposited on substrates with different polarities. We observed an unexpected high smFSH from structurally rigid Rhodamine B compared with a structurally flexible Cyanine dye - Alexa Fluor 647. Based on experimentally measured smFSH, we ruled out the system’s noise uncertainty, single-molecule spectral diffusion, and environmental polarity as the primary causes of the high smFSH. We found that the rotational flexibility of N, N-dialkylated groups contributed to the smFSH. With the high smFSH observed in structurally more rigid model fluorophores, we speculated that other intra-molecular coordinate and environmental changes might also contribute to the high smFSH in Rhodamines.
Ovarian cancer has been nicknamed the “silent killer”. Most patients with ovarian cancer are diagnosed at an advanced stage of the disease for the first time because of its insignificant early clinical symptoms. In addition to the difficulty of early screening and delay in diagnosis, the high recurrence rate and relapsed refractory status of patients with ovarian cancer are also important factors for their high mortality. Patients with recurrent ovarian cancer often use neoadjuvant chemotherapy followed by surgery as the first choice. However, this is often accompanied by chemotherapy resistance, leading to treatment failure and a mortality rate of more than 90%. In the past, it was believed that the anti-tumor effect of chemotherapeutics represented by cisplatin was entirely attributable to its irreversible damage to DNA, but current research has found that it can inhibit cell growth and cytotoxicity via nuclear and cytoplasmic coordinated integration. As an important hub and integration platform for intracellular signal communication, mitochondria are responsible for multiple key factors during tumor occurrence and development, such as metabolic reprogramming, acquisition of metastatic ability, and chemotherapy drug response. The role of mitochondria in ovarian cancer chemotherapy resistance is becoming increasingly recognized. In this review, we discuss the cellular interactive regulatory network surrounding mitochondria, elucidate the mechanisms of tumor cell survival under chemotherapy, and discuss potential means of interfering with mitochondrial function as a novel anti-cancer therapy.
Recently, a lot of efforts have been devoted to the transport properties of relatively thick ZrTe 5 crystals, focusing on their three-dimensional topological effects. ZrTe 5 in its 2D limit, on the other hand, was much less explored experimentally. Here we present detailed magnetotransport studies of few-layer ZrTe 5 devices, in which the coexistence of strong electron-electron interaction and weak anti-localization is observed. The coexistence of the two effects manifests itself in the temperature and magnetic field dependence of the resistance as well as in the universal conductance fluctuations of the few-layer devices. Both effects also show strong two dimensional characteristics. Finally, our results provide new insight into the highly intricate properties of topological material ZrTe 5 .
Not Available
Hydro-wind-photovoltaic (PV) hybrid system has the potential to increase the integration of renewable energy sources into an existing grid. For the long-term operation of the system, due to the non-storable nature of wind and PV power, it is essentially to decide the optimal long-term carryover storage of cascade reservoirs. However, it remains a challenge due to high uncertainties of long-term forecasts and complicated hydraulic/electrical relationships between cascade reservoirs. Here in this study, a forecast-driven decision-making model is proposed for the hybrid system, which converts the multi-stage long-term operation process into a two-stage operation problem (including current stage and carryover stage) to avoid using longer-horizon forecast information with lower accuracy. First, the carryover stage energy surfaces (CESs) considering the forecast uncertainties of wind, solar and hydro resources are proposed to characterize carryover stage benefit quantitatively. Then a CESs-based forward decision-making optimization model is developed to guide the long-term operation of a hydro-wind-photovoltaic hybrid system. The applications in a hydro-wind-PV hybrid system of Yalong River basin results show that: compared with conventional operation, 1) power generation increases 9.03%; 2) in terms of the carryover storages control, the reservoir impounding and drawdown timing are delayed, and the drawdown depth is increased, which can be used to formulate better reservoir operation rules.
The excitation of surface-localized polaronic states has recently been discussed as an additional photocatalytic channel to band gap excitation for rutile TiO 2 . A contribution from photoexcitation of bulk polarons could, in principle, provide a greater contribution because of their higher number and their protection from oxidation. However, determining such a contribution to the photoyield is challenging and has not been achieved thus far. In this work, we use two photon photoemission spectroscopy measurements to separate bulk and surface polaron photoexcitation. We find that bulk polarons are less bound by 0.2 eV compared with polarons at the surface, consistent with our results of hybrid density functional theory calculations. Because the excited state is also shifted to higher energy, bulk polarons have the same photoexcitation resonance energy as at the surface (3.6 eV) with a threshold at 3.1 eV. This is degenerate with the band gap, suggesting that bulk polarons could also provide an additional contribution to the photoyield.
Not Available
Sr 2 IrO 4 is an archetypal spin-orbit-coupled Mott insulator with an antiferromagnetic state below 240 K. Here we report results of our study on single crystals of Sr 2 Ir 1–x Fe x O 4 (0 ≤ x < 0.32) and Sr 2 Ir 1–x Co x O 4 (0 ≤ x < 0.22). Fe doping retains the antiferromagnetic state but simultaneously precipitates an emergent metallic state whereas Co doping causes a rapid collapse of both the antiferromagnetic and Mott states, giving rise to a confined metallic state featuring a pronounced linearity of the basal-plane resistivity up to 700 K. The results indicate tetravalent Fe 4+ (3d 4 ) ions in the intermediate spin state with S = 1 and Co 4+ (3d 5 ) ions in the high spin state with S = 5/2 substituting for Ir 4+ (5d 5 ) ions in Sr 2 IrO 4 , respectively. The effective magnetic moment closely tracks the Néel temperature as doping increases, suggesting that the spin state of the dopant predominately determines the magnetic properties in doped Sr 2 IrO 4 . Furthermore, all relevant properties including charge-carrier density (e.g., 10 28 /m 3 ), Sommerfeld coefficient (e.g., 19 mJ / mole K 2 ), and Wilson ratio (e.g., 2.6) consistently demonstrate an emergent metallic state that is both robust and highly correlated in the two systems, arising from the percolation of bound states and the weakening of structural distortions. Furthermore, this study strongly indicates that the antiferromagnetic and Mott states are correlated in an unconventional manner in Sr 2 IrO 4 .
Abstract Quantum chemistry is interested in calculating ground and excited states of molecular systems by solving the electronic Schrödinger equation. The exact numerical solution of this equation, frequently represented as an eigenvalue problem, remains unfeasible for most molecules and requires approximate methods. In this paper we introduce the use of Quantum Community Detection performed using the D-Wave quantum annealer to reduce the molecular Hamiltonian matrix in Slater determinant basis without chemical knowledge. Given a molecule represented by a matrix of Slater determinants, the connectivity between Slater determinants (as off-diagonal elements) is viewed as a graph adjacency matrix for determining multiple communities based on modularity maximization. A gauge metric based on perturbation theory is used to determine the lowest energy cluster. This cluster or sub-matrix of Slater determinants is used to calculate approximate ground state and excited state energies within chemical accuracy. The details of this method are described along with demonstrating its performance across multiple molecules of interest and bond dissociation cases. These examples provide proof-of-principle results for approximate solution of the electronic structure problem using quantum computing. This approach is general and shows potential to reduce the computational complexity of post-Hartree–Fock methods as future advances in quantum hardware become available.
It is well known that the solvent plays a critical role in ultrafast electron-transfer reactions. However, solvent reorganization occurs on multiple length scales, and selectively measuring short-range solute–solvent interactions at the atomic level with femtosecond time resolution remains a challenge. Here we report femtosecond X-ray scattering and emission measurements following photoinduced charge-transfer excitation in a mixed-valence bimetallic (Fe ii Ru iii ) complex in water, and their interpretation using non-equilibrium molecular dynamics simulations. Combined experimental and computational analysis reveals that the charge-transfer excited state has a lifetime of 62 fs and that coherent translational motions of the first solvation shell are coupled to the back electron transfer. Overall, our molecular dynamics simulations identify that the observed coherent translational motions arise from hydrogen bonding changes between the solute and nearby water molecules upon photoexcitation, and have an amplitude of tenths of ångströms, 120–200 cm -1 frequency and ~100 fs relaxation time. This study provides an atomistic view of coherent solvent reorganization mediating ultrafast intramolecular electron transfer.