Search NASA⌕ Search

Engineering topics

Zhang, Yue

Publications and source records attributed to Zhang, Yue.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigation of the impact of supplemental reflective films to improve micro-light climate within tomato plant canopy in solar greenhouses

The non-uniform growth and development of crops within Chinese Solar Greenhouses (CSG) is directly related to the micro-light climate within canopy. In practice, reflective films are used to improve micro-light climate within plant canopy by homogenizing light distribution and so increasing total plant light interception. However, as to our knowledge, the contributions to light distribution within canopy have not been investigated for passive reflector like reflective films. Field experiments dealing with light conditions and growth behavior over time, are complicated to carry out, time-consuming and hard to control, while however, accurate measurements of how reflective films influence the micro-light climate of canopy are an essential step to improve the growth conditions for any crop. Here, we propose a supplementary light strategy using reflective films to improve light distribution within plant canopy. Based on the example of CSG, a 3D greenhouse model including a detailed 3D tomato canopy structure was constructed to simulate the influence of supplementary reflective films to improve micro-light climate. Comparison of measured solar radiation intensity with predicted model data demonstrated that the model could precisely predict light radiation intensity over time with different time points and positions in the greenhouse. A series of reflective film configurations were investigated based on features analysis of light distribution in the tomato canopy on sunny days using the proposed model. The reflective film configuration scheme with the highest impact significantly improved the evenness of horizontal and vertical light distribution in tomato canopy. The strategy provided here can be used to configure reflective films that will enhance light conditions in CSG, which can be applied and extended in different scenarios.

Liu, Anhua↗
DOE OSTI2022

Discovery of Graphene-Water Membrane Structure: Toward High-Quality Graphene Process

It is widely accepted that solid-state membranes are indispensable media for the graphene process, particularly transfer procedures. But these membranes inevitably bring contaminations and residues to the transferred graphene and consequently compromise the material quality. This study reports a newly observed free-standing graphene-water membrane structure, which replaces the conventional solid-state supporting media with liquid film to sustain the graphene integrity and continuity. Experimental observation, theoretical model, and molecular dynamics simulations consistently indicate that the high surface tension of pure water and its large contact angle with graphene are essential factors for forming such a membrane structure. More interestingly, water surface tension ensures the flatness of graphene layers and renders high transfer quality on many types of target substrates. This report enriches the understanding of the interactions on reduced dimensional material while rendering an alternative approach for scalable layered material processing with ensured quality for advanced manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unleashing the Power of Knowledge Extraction from Scientific Literature in Catalysis

Valuable knowledge of catalysis is often hidden in a large amount of scientific literature. There is an urgent need to extract useful knowledge to facilitate scientific discovery. Here this work takes the first step toward the goal in the field of catalysis. Specifically, we construct the first information extraction benchmark data set that covers the field of catalysis and also develop a general extraction framework that can accurately extract catalysis-related entities from scientific literature with 90% extraction accuracy. We further demonstrate the feasibility of leveraging the extracted knowledge to help users better access relevant information in catalysis through an entity-aware search engine and a correlation analysis system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Source of Rate Acceleration for Carbocation Cyclization in Biomimetic Supramolecular Cages

The results of quantum chemical and molecular dynamics calculations reveal that polyanionic gallium-based cages accelerate cyclization reactions of pentadienyl alcohols as a result of substrate cage interactions, preferential binding of reactive conformations of substrate/H 3 O + pairs, and increased substrate basicity. However, the increase in basicity dominates. Here, experimental structure–activity relationship studies in which the metal vertices and overall charge of the cage are varied confirm the model derived via calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Forward Physics Facility: Sites, experiments, and physics potential

The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acceptance of the existing large LHC experiments and will observe rare and exotic processes in an extremely low-background environment. In this work, we summarize the current status of plans for the FPF, including recent progress in civil engineering in identifying promising sites for the FPF and the experiments currently envisioned to realize the FPF’s physics potential. We then review the many Standard Model and new physics topics that will be advanced by the FPF, including searches for long-lived particles, probes of dark matter and dark sectors, high-statistics studies of TeV neutrinos of all three flavors, aspects of perturbative and non-perturbative QCD, and high-energy astroparticle physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Novel Application of Machine Learning Techniques for Rapid Source Apportionment of Aerosol Mass Spectrometer Datasets

In this work, we apply machine learning approaches sparse multinomial logistic regression to classify aerosol mass spectrometer (AMS) unit mass resolution (UMR) data followed by an ensemble regression technique for source apportionment of organic aerosols (OA). The classifier was trained on 60 well characterized laboratory and positive matrix factorization (PMF) deconvolved reference spectra to identify eight OA types. These include four laboratory-derived secondary organic aerosol (SOA) spectra, which include isoprene photooxidation SOA, isoprene epoxydiols (IEPOX) SOA, a monoterpene SOA type that includes a-pinene and ß-pinene SOA, and aromatic SOA from oxidation of naphthalene and m-xylene precursors, as well as PMF deconvolved spectra for three primary organic aerosol (POA) types, namely, hydrocarbon-like organic aerosol (HOA), biomass burning organic aerosol (BBOA), and cooking OA (COA), and a more oxidized oxygenated OA type (MO-OOA). A 5-fold cross-validation strategy, repeated 10 times, was used to assess the classifier’s performance. The classifier had high classification accuracy for COA, aromatic SOA, and isoprene SOA spectra but incorrectly classified ~9% by number of MO-OOA spectra as BBOA, 12% of BBOA spectra as HOA (and vice versa), and 18% of IEPOX-SOA spectra as aromatic SOA. Next, an ensemble regression model was trained on an artificially generated dataset consisting of mixtures of different OA types to assess its ability to predict fractional mass abundances from classification probabilities of various OA species obtained from the multinomial logistic regression classifier trained on the reference spectra. Ultimately, the proposed approach was applied for source apportionment of aircraft-based AMS measurements of OA UMR spectra during the HI-SCALE field campaign. On two representative days (May 6th and 18th, 2016), the algorithm determined that ~50-60% of OA by mass was MO-OOA, which represented a highly aged organic aerosol mixture from different sources. On both days, BBOA was determined to contribute less than 10% to OA by mass. However, on May 18th, the aromatic SOA fraction was higher compared to that on May 6th. The proposed approach is capable of rapidly analyzing AMS data in real time, making it suitable for applications where rapid source apportionment of AMS OA spectra is desirable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Cloud Type and Life Stage Dependency of Liquid–Ice Mass Partitioning in Mixed-Phase Clouds

This paper analyzes the temperature, cloud type, and life stage dependencies of phase partitioning in mixed-phase clouds spanning tropics, midlatitudes, and the Arctic, using data from ground-based remote sensing measurements in Alaska and aircraft measurements from three field campaigns. The results show: (1) The liquid fraction in Arctic stratiform clouds decreased from 1 to 0.6 between 0 °C and −30 °C and was lower in spring because of the higher dust occurrence in Barrow, Alaska; (2) In wintertime orographic clouds, the liquid fraction was greater than 0.8; (3) Phase partitioning in convective clouds varied significantly with life stages. In the developing stage, it decreased from 1 to 0.3 between −5 °C and −15 °C, indicating rapid ice generation, while at the mature and dissipating stages, the liquid fractions were lower; (4) The stratiform regions of mesoscale convective systems were dominated by ice, with liquid fractions lower than 0.2; and (5) The variability of phase partitioning varied for different cloud types. In stratiform clouds, liquid dominated at warm temperatures. As the temperature decreased, an ice-dominated region was more frequently observed, while the occurrence of the mixed-phase region remained low. For convective clouds, the variability of phase partitioning was controlled by continuous glaciation with decreasing temperature and life cycle.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Thermonuclear neutron emission from a sheared-flow stabilized Z-pinch

We report the fusion Z-pinch experiment (FuZE) is a sheared-flow stabilized Z-pinch designed to study the effects of flow stabilization on deuterium plasmas with densities and temperatures high enough to drive nuclear fusion reactions. Results from FuZE show high pinch currents and neutron emission durations thousands of times longer than instability growth times. While these results are consistent with thermonuclear neutron emission, energetically resolved neutron measurements are a stronger constraint on the origin of the fusion production. This stems from the strong anisotropy in energy created in beam-target fusion, compared to the relatively isotropic emission in thermonuclear fusion. In dense Z-pinch plasmas, a potential and undesirable cause of beam-target fusion reactions is the presence of fast-growing, “sausage” instabilities. This work introduces a new method for characterizing beam instabilities by recording individual neutron interactions in plastic scintillator detectors positioned at two different angles around the device chamber. Histograms of the pulse-integral spectra from the two locations are compared using detailed Monte Carlo simulations. These models infer the deuteron beam energy based on differences in the measured neutron spectra at the two angles, thereby discriminating beam-target from thermonuclear production. An analysis of neutron emission profiles from FuZE precludes the presence of deuteron beams with energies greater than 4.65 keV with a statistical uncertainty of 4.15 keV and a systematic uncertainty of 0.53 keV. This analysis demonstrates that axial, beam-target fusion reactions are not the dominant source of neutron emission from FuZE. These data are promising for scaling FuZE up to fusion reactor conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Modeling the Size Distribution and Chemical Composition of Secondary Organic Aerosols during the Reactive Uptake of Isoprene-Derived Epoxydiols under Low-Humidity Condition

Reactive uptake of isoprene epoxydiols (IEPOX), which are isoprene oxidation products, onto acidic sulfate aerosols is recognized to be an important mechanism for the formation of isoprene-derived secondary organic aerosol (SOA). While a mechanistic understanding of IEPOX-SOA formation exists, several processes affecting their formation remain uncertain. Evaluating mechanistic IEPOX-SOA models with controlled laboratory experiments under longer atmospherically relevant timescales is critical. Here, we implement our latest understanding of IEPOX-SOA formation within a box model to simulate the measured reactive uptake of IEPOX on polydisperse ammonium bisulfate seed aerosols within an environmental Teflon chamber. The model is evaluated with single-particle measurements of size distribution, volume, density, and composition of aerosols due to IEPOX-SOA formation at timescales of hours. Additionally, we find that the model can simulate the growth of particles due to IEPOX multiphase chemistry, as reflected in increases of the mean particle size and volume concentrations, and a shift of number size distribution to larger sizes. The model also predicts the observed evolution of particle number mean diameter and total volume concentrations at the end of the experiment. We show that in addition to self-limiting effects of IEPOX-SOA coatings, accounting for the molar balance between inorganic and organic sulfate and mass accommodation coefficient of IEPOX are important parameters governing modeling of IEPOX-SOA formation. Thus, models which do not account for the molar sulfate balance and/or diffusion limitations within IEPOX-SOA coatings are likely to predict too high IEPOX-SOA formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unraveling disadhesion mechanism of epoxy/CSH interface under aggressive conditions

Almost all FRP-reinforced concrete exposed to the marine environment are susceptible to durability deficiencies due to failure of the FRP/epoxy/concrete interface, especially the vulnerable epoxy/concrete interface, which is frequently attacked by water and ions. Herein, molecular dynamics simulations of epoxy/CSH interface under different environmental exposures are utilized to specifically elucidate the degradation principles of water and ions on the bonding properties and mechanical responses of the epoxy/concrete interface. The environmental sequences associated with the interfacial bonding degradation are arranged as Na{sub 2}SO{sub 4} + NaCl>NaCl>Na{sub 2}SO{sub 4} > Water>Dry. Remarkably, water molecules weaken the interaction between the epoxy and CSH by robbing interfacial H- and Ca-O bonds, thereby reducing the energy barrier to interfacial peel and shear failure. The weakening effects are exacerbated by the presence of aggressive ions, as Na{sup +} ions attracted to the CSH surface accumulate more water molecules in the interfacial region by forming hydrated ions clusters, which ultimately accelerates the epoxy/CSH interfacial degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tunicamycin-induced endoplasmic reticulum stress inhibits chemoresistance of FaDu hypopharyngeal carcinoma cells in 3D collagen I cultures and in vivo

Highlights: • 3D collagen I culture induces chemoresistance of FaDu hypopharyngeal carcinoma cells. • Tunicamycin-induced ER stress inhibits chemoresistance in collagen I cultures. • Tunicamycin-induced ER stress potentiates anticancer efficacy in vivo. • Tunicamycin-induced ER stress inhibits TGF-β1 and modifies integrin β1 glycosylation. The prognosis in patients with advanced head and neck squamous cell carcinoma (HNSCC) is widely affected by the resistance to chemotherapy. As a culture scaffold, collagen I was showed to promote CSC (cancer stem cell) properties of cancer cells which could be used as in vitro models to study the chemoresistance in HNSCC. Endoplasmic reticulum (ER) stress is a cellular stress condition which could affect tumor progression and promote the anti-tumor effects of certain drugs. However, the impact of ER stress on collagen I induced CSC properties and chemoresistance of HNSCC cells has not been addressed. In this study we investigated the effects of tunicamycin (TM) induced ER stress on the stemness and sensitivity to chemotherapeutic drugs of FaDu hypopharyngeal carcinoma cells in 3D (three-dimensional) collagen I cultures and mouse xenograft models. Our study revealed that Collagen I scaffold promoted CSC properties and increased G1 population of FaDu cells in 3D cultures, accompanied by maturation of integrin β1 and enhanced activated TGF-β1 concentration. Compared to 2D (two-dimensional) cultured cells, cells in 3D Collagen I scaffold exhibited significantly increased resistance to chemotherapeutic drugs of cisplatin and paclitaxel. Further analysis revealed that TM induced ER stress preferentially attenuated chemoresistance of FaDu cells in 3D collagen I, downregulated their CSC properties and TGF-β1 concentration and resulted in deglycosylation of integrin β1. TM was further evaluated in the mouse xenograft models and showed significant tumor growth inhibition in combination with paclitaxel than either TM or paclitaxel alone. Taken together, Our findings suggest that TM-induced ER stress potentiates anticancer efficacy of FaDu cells in 3D cultures and in vivo, and highlight implications for targeting chemotherapy-resistant cancer stem cells under ER stress conditions.

60 APPLIED LIFE SCIENCES↗