Search NASA⌕ Search

Engineering topics

Zhang, Yufeng

Publications and source records attributed to Zhang, Yufeng.

Heteroepitaxial registry and band structures at the polar-to-polar STO/ZnO($000\bar{1}$) interfaces

The interface between ZnO and SrTiO 3 (STO) provides a paradigm for combining perovskite oxides and wurtzite-structure semiconductors. However, the heteroepitaxial and energy band structures of the polar-to-polar STO/ZnO($000\bar{1}$) interfaces has rarely been studied. In this study, it is shown that the STO films prepared on the ZnO($000\bar{1}$) substrate by pulsed laser deposition possess [011]STO and [111]STO azimuth orientations, which exhibit three- and two-fold rotation domains respectively, as demonstrated by X-ray diffraction and transmission electron microscopy. The band structures of the STO(011)/ZnO($000\bar{1}$) and STO(111)/ZnO($000\bar{1}$) interfaces are bending downward as shown in the I-V characteristic spectra and first principle calculations. These results are different from the single orientation ZnO films grown on STO-(011) and -(111) substrate, as reported in previous literatures, showing the heteroepitaxial asymmetry between STO/ZnO and ZnO/STO interfaces. This work presents an approach towards the physical modeling of combinations between perovskite oxides and wurtzite-structure semiconductors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In situ study of the electronic structure of polar-to-polar SrTiO 3 /($000\bar1$)ZnO heterointerface

The SrTiO 3 (STO)/ZnO heterointerface, which is widely used in the fabrication of novel optoelectronic devices, is a classical system combining functional perovskite oxides and wurtzite-structure semiconductor materials. The electronic structure of the heterointerface often plays a significant role in controlling the functions of novel devices. In this study, the electronic structure was explored using in situ photoemission spectroscopy and X-ray absorption spectroscopy. X-ray diffraction results showed the coexistence of (111) STO and (011) STO orientations for the STO film deposited on the ZnO-($000\bar1$) substrate via pulsed laser deposition. High-resolution transmission electron microscopic results revealed two types of polar interfaces: [$11\bar2$][$10\bar1$](111) STO //[$1\bar210$][$10\bar10$]($000\bar1$) ZnO and [111][$2\bar1\bar1$](011) STO //[$10\bar21$][$10\bar10$]($000\bar1$)ZnO. In situ photoemission spectroscopic results revealed downward band bending and the transformation of the valence states of Ti from 4+ to 3+, with extra electrons transferring to the hybridization states between O 2p and Ti t 2g orbitals at the polar-to-polar STO/ZnO interface. We propose that the polar discontinuity drives the electron transfer to the STO/ZnO interface during the growth process. This study provides insight into the electronic structure of the STO/($000\bar1$)ZnO heterointerface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical soliton solutions, explicit power series solutions and linear stability analysis of the quintic derivative nonlinear Schrödinger equation

In this paper, the quintic derivative nonlinear Schrödinger equation is investigated into two main aspects. Firstly, a series of solutions of this equation are derived. More specifically, the singular solitons and dark solitons are obtained by using the ansatz method. The explicit power series solutions for the equation has also been constructed by employing power series method. Secondly, linear stability analysis is applied to estimate the stability of the equation. Finally, all solutions are presented via 3-dimensional plots with choices some special parameters to show the dynamic characteristics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simultaneous Removal of Silicon and Iron-Rich Phases from Coarse Al-Si Alloys Using Manganese Under Electromagnetic Field

Coarse Al-Si alloy is produced from bauxite via carbon electro-thermal reduction method. Silicon and iron-rich phases are two main detrimental impurities in coarse Al-Si alloy, and they can be simultaneously removed by adding Mn under the electromagnetic field. We focus on the influence of different Mn additions, dropping rates, and current intensity on the simultaneous removal efficiency of Si and Fe. Experimental results show that as mole ratio of Mn/Fe reaches more than 0.8, the morphology of iron-rich phases together with silicon changed from harmful acicular-like to the contributing bulks, concentrated at the bottom of Al-Si alloy as intermetallic compounds. Furthermore, when Mn/Fe reaches 1.2 and a lower dropping rate (5 to 25 μm/s) is adopted, both Si and Fe contents in the Al-Si alloy decreased drastically after electromagnetic directional solidification process, reaching 11.42 and 0.4 pct, respectively, with a desirable Fe removal efficiency of 91 pct. Finally, the principle of simultaneously separating Si and removing iron-rich phases from Al-Si alloy is studied deeply.

36 MATERIALS SCIENCE↗

Strategies for Reducing the PGM Loading in High Power AEMFC Anodes

Anion Exchange Membrane Fuel Cells (AEMFCs) have experienced a significant rise in attention in recent years, largely motivated by the potential to overcome the costs that have plateaued for proton exchange membrane fuel cells. However, despite significant advances in power generation, membrane conductivity, membrane stability, and catalyst activity, the vast majority of high performing AEMFCs are fabricated with a high PGM loading (0.4-0.8 mg cm -2 ). This work demonstrates an electrode fabrication method that reduces the anode catalyst loading by 85 % while still achieving performance ca. 1 W cm -2 - accomplished by designing a multi-layered electrode comprised of an optimized ionomer:carbon:PGM ratio catalyst layer coupled with a hydrophobic microporous layer. If paired with a high-performing PGM-free cathode, this new anode can meet existing DOE PGM loading and performance targets.

30 DIRECT ENERGY CONVERSION↗

Fibulin-5 promotes airway smooth muscle cell proliferation and migration via modulating Hippo-YAP/TAZ pathway

Asthma is a common chronic disease mainly occurs from childhood. Increased airway smooth muscle mass is involved in the pathogenesis of asthma. Fibulin-5 was upregulated in the lung tissues of patients with COPD and idiopathic pulmonary fibrosis. This study aimed to investigate Fibulin-5 expression in asthmatic patients and the effect and mechanism of Fibulin-5 on the proliferation and migration of airway smooth muscle cells (ASMCs). The expression of Fibulin-5, YAP, and TAZ in the induced sputum of 38 asthmatic children (19 mild and 19 moderate asthmatics) and 19 healthy controls was determined. The effects and mechanisms of Fibulin-5 on the proliferation and migration of ASMCs were analyzed through upregulating Fibulin-5. We found compared with healthy controls, the expression of Fibulin-5, YAP, and TAZ was increased in the induced sputum of asthmatic children and much higher in moderate asthmatics. Fibulin-5 overexpression promoted the proliferation and migration of ASMCs, upregulated the expression of YAP and TAZ, and reduced the levels of p-YAP and p-TAZ. YAP inhibitor (Peptide 17) abrogated the proliferation and migration of ASMCs induced by Fibulin-5 overexpression in a dose-dependent manner. Additionally, Fibulin-5 overexpression enhanced its binding capacity of β1 integrin, and β1 integrin blocking antibody partly reversed the effect of Fibulin-5 overexpression on the levels of YAP and TAZ. In conclusion, Fibulin-5 expression is correlated with the pathogenesis of childhood asthma. It may function at least partly through binding to β1 integrin and modulating Hippo-YAP/TAZ pathway to promote the proliferation and migration of ASMCs. - Highlights: • Fibulin-5 expression is increased in the induced sputum of asthmatic patients. • Overexpression of Fibulin-5 promotes the proliferation and migration of ASMCs. • Fibulin-5 functions via modulating Hippo-YAP/TAZ signaling pathway. • Fibulin-5 binding to β1 integrin to activate YAP/TAZ signaling.

60 APPLIED LIFE SCIENCES↗

Effect of pressure on the structural properties of Li[Li{sub 0.1}Ni{sub 0.35}Mn{sub 0.55}]O{sub 2}

Li-rich cathode material Li[Li{sub 0.1}Ni{sub 0.35}Mn{sub 0.55}]O{sub 2} was synthesized by a sol-gel method. The morphology and a-NaFeO{sub 2} type structure of the material at ambient conditions were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The high-pressure behavior of the material was studied at pressure up to 19.7 GPa by using angle dispersive synchrotron X-ray powder diffraction (ADXD). The studies affirmed that the a-NaFeO{sub 2} type structure existed up to at least 19.7 GPa. Rietveld refinement analysis indicated that the c/a lattice parameter ratio decreased and the Li-O bond length shrunk with the increasing pressure, however, the Li{sup +}/Ni{sup 2+} ions exchange increased under elevated pressure. The pressure-volume data of the material were fitted to the third-order Birch-Murnaghan equation of state and bulk modulus obtained upon compression from the fitting was 117 (1) GPa.

36 MATERIALS SCIENCE↗

Phase transformation of Ho[subscript 2]O[subscript 3] at high pressure

The structural stability of cubic Ho{sub 2}O{sub 3} under high pressure has been investigated by angle-dispersive x-ray diffraction (ADXD) in a diamond anvil cell up to 63.0 GPa at room temperature. The diffraction data reveal two structural transformations on compression. The structural transformation from a cubic to a monoclinic structure starts at 8.9 GPa and is complete at 16.3 GPa with an {approx}8.1% volume collapse. A hexagonal phase begins to appear at {approx}14.8 GPa and becomes dominant at 26.4 GPa. This high-pressure hexagonal phase with a small amount of retained monoclinic phase is stable up to the highest pressure of 63.0 GPa in this study. After release of pressure, the hexagonal phase transforms to a monoclinic structure. A third-order Birch-Murnaghan fit yields zero pressure bulk moduli (B{sub 0}) of 206(3), 200(7) and 204(19) GPa and their pressure derivatives (B'{sub 0}) of 4.8(4), 2.1(4), 3.8(5) for the cubic, monoclinic and hexagonal phases, respectively. Comparing with other rare-earth sesquioxides, it is suggested that the transition pressure from cubic to monoclinic phase, as well as the bulk modulus of the cubic phase, increases with the decreasing of the cation radius of rare-earth sesquioxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced phase transformations in cubic Gd[subscript 2]O[subscript 3]

High-pressure transformation and compression behavior of Gd{sub 2}O{sub 3} were investigated using synchrotron radiation x-ray diffraction in a diamond anvil cell up to 44 GPa at room temperature. The structural transformation from a cubic to a monoclinic phase occurred during the sample precompression process. Phase transitions from both the cubic and the monoclinic polymorphs to a hexagonal structure were observed. The hexagonal phase was stable up to the highest pressure in this study and was not quenchable and transformed to a monoclinic phase after pressure release. The bulk moduli of Gd{sub 2}O{sub 3} for the cubic, monoclinic, and hexagonal phases were obtained by fitting the compression data to the Birch-Murnaghan equation of state. Moreover, an anomaly of the hexagonal type Gd{sub 2}O{sub 3} was observed.

43 PARTICLE ACCELERATORS↗