Search NASA⌕ Search

Engineering topics

Zhang, Yumin

Publications and source records attributed to Zhang, Yumin.

Nitrogen fixation as NO x using air plasma coupled with heterogeneous catalysis at atmospheric pressure

Here, this study presents insights into the use of activated Al 2 O 3 catalysts to improve the energy efficiency of NO x production in atmospheric pressure air plasma. The introduction of catalysts in the direct current glow discharge system reduces the energy cost of NO x production by up to 45% at low gas flow rates. Notably, even when positioned away from the plasma zone, the catalyst enhanced NO x production, suggesting a significant role for the catalytic activation of downstream neutral species. The study also introduced a novel approach involving an air plasma jet infused with floating catalyst powder. This method significantly increased energy efficiency at higher discharge currents, with an associated energy cost of 2.9 MJ/mol for NO x production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Minimal Information Set To Enable Verifiable Theoretical Battery Research

Batteries are an enabling technology for addressing sustainability through the electrification of various forms of transportation (1) and grid storage. (2) Batteries are truly multi-scale, multi-physics devices, and accordingly various theoretical descriptions exist to understand their behavior (3-5) ranging from atomistic details to techno-economic trends. As we explore advanced battery chemistries (6,7) or previously inaccessible aspects of existing ones, (8-10) new theories are required to drive decisions. (11-13) The decisions are influenced by the limitations of the underlying theory. Advanced theories used to understand battery phenomena are complicated and require substantial effort to reproduce. However, such constraints should not limit the insights from these theories. We can strive to make the theoretical research verifiable such that any battery stakeholder can assess the veracity of new theories, sophisticated simulations or elaborate analyses. We distinguish verifiability, which amounts to “Can I trust the results, conclusions and insights and identify the context where they are relevant?”, from reproducibility, which ensures “Would I get the same results if I followed the same steps?” With this motivation, we propose a checklist to guide future reports of theoretical battery research in Table 1. We hereafter discuss our thoughts leading to this and how it helps to consistently document necessary details while allowing complete freedom for creativity of individual researchers. Given the differences between experimental and theoretical studies, the proposed checklist differs from its experimental counterparts. (14,15) This checklist covers all flavors of theoretical battery research, ranging from atomic/molecular calculations (16-19) to mesoscale (20,21) and continuum-scale interactions, (9,22) and techno-economic analysis. (23,24) Finally, as more and more experimental studies analyze raw data, (25) we feel this checklist would be broadly relevant.

25 ENERGY STORAGE↗

Preparation and Dewatering Property of Two Sludge Conditioners Chitosan/AM/AA and Chitosan/AM/AA/DMDAAC

Two new chitosan-grafting copolymers (chitosan-g-PAM-AA and C-chitosan-g-PAM-AA) as sludge conditioners (flocculation and aggregation) have been prepared by employing ceric sulfate as a free radical initiator under nitrogen atmosphere in aqueous solution. The optimum condition for synthesizing chitosan-grafting copolymer was determined by orthogonal experiments. The structure, morphology and property of the obtained graft polymers were characterized by FT-IR, XRD, SEM, TGA and contact angle. Further, the municipal activated sludge dewatering performance of the synthesized copolymers was evaluated by the filter cake moisture content. Herein, the effects of pH value and dewatering temperatures of activated sludge, loading dosage or cationic degree of C-chitosan-g-PAM-AA on the filter cake moisture content were investigated. The synthesized amphoteric flocculant C-chitosan-g-PAM-AA showed a highly effective flocculation capability for activated sludge compared with chitosan-g-PAM-AA, chitosan, polyacrylamide (PAM). Also, the lowest filter cake moisture content was up to 61.41%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ag-LaFeO3 nanoparticles using molecular imprinting technique for selective detection of xylene

Highlights: • Ag-LaFeO{sub 3} based gas sensor using molecular imprinting technique has been successfully applied to the detection of xylene. • Ultrahigh response (resistance ratio = 36.2) to 5 ppm xylene is achieved. • The optimal operating temperature (99 °C) is extremely low. - Abstract: Xylene is a hazardous volatile organic compound, however, the selective detection of ppm-level xylene using oxide semiconductor gas sensor remains a challenging issue. In this study, Ag-LaFeO{sub 3} was modified with molecular imprinting technique, in which methacrylic acid and hydroxyethyl methylacrylate are used as functional monomers, respectively. Based on XRD, EDS, XPS, SEM, TEM, BET nitrogen adsorption observations, the structure and morphology of the samples are characterized. The as-prepared molecularly imprinted nanoparticles with methacrylic acid as functional monomer exhibit high selectivity and response to xylene gas, and the response is dependent on the type and content of the functional monomer. To 5 ppm xylene, the optimal response is 36.2 at the operating temperature of 99 °C. In addition, low cross-responses to the other test gases were observed. The remarkable enhancement in the gas-sensing properties of the samples is attributed to their high specific surface area and molecular imprinting structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synergistic Phase and Disorder Engineering in 1T‐MoSe 2 Nanosheets for Enhanced Hydrogen‐Evolution Reaction

MoSe 2 is a promising earth‐abundant electrocatalyst for the hydrogen‐evolution reaction (HER), even though it has received much less attention among the layered dichalcogenide (MX 2 ) materials than MoS 2 so far. Here, a novel hydrothermal‐synthesis strategy is presented to achieve simultaneous and synergistic modulation of crystal phase and disorder in partially crystallized 1T‐MoSe 2 nanosheets to dramatically enhance their HER catalytic activity. Careful structural characterization and defect characterization using positron annihilation lifetime spectroscopy correlated with electrochemical measurements show that the formation of the 1T phase under a large excess of the NaBH 4 reductant during synthesis can effectively improve the intrinsic activity and conductivity, and the disordered structure from a lower reaction temperature can provide abundant unsaturated defects as active sites. Such synergistic effects lead to superior HER catalytic activity with an overpotential of 152 mV versus reversible hydrogen electrode (RHE) for the electrocatalytic current density of j = −10 mA cm −2 , and a Tafel slope of 52 mV dec −1 . This work paves a new pathway for improving the catalytic activity of MoSe 2 and generally MX 2 ‐based electrocatalysts via a synergistic modulation strategy.

Yin, Ying↗