Search NASA⌕ Search

Engineering topics

Zhang, Z. Y.

Publications and source records attributed to Zhang, Z. Y..

Average charge states of heavy ions in rarefied hydrogen

In this work, we present the results of experiments on measuring the charges of heavy ions from Rn (Z=86) to Og (Z=118) in rarefied hydrogen performed at the DGFRS and DGFRS-2 separators. Two formulae are proposed that can be used to calculate the charges of ions in H 2 and which take into account the influence of the shell structure of atoms on the charge value. The accuracy of estimating the charge of ions of superheavy atoms was measured to be 2%. The charges of Ra, Th, and No ions were measured at a hydrogen pressure from 0.5 to 3.3 mbar, which allowed us to evaluate the effect of H 2 density on the charge value. A formula is proposed to account for the effect of gas density when performing experiments at different gas pressures. It is shown that the results of experiments performed at different separators DGFRS and DGFRS-2 are in good agreement with each other.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

New isotope 286 Mc produced in the 243 Am + 48 Ca reaction

In this paper, we present results of the second experiment on the synthesis of Mc isotopes in the 243 Am + 48 Ca reaction performed at the gas-filled separator DGFRS-2 of the SHE Factory at JINR. Here, the new isotope 286 Mc was synthesized, and its half-life of $20^{+98}_{–9}$ ms and α-particle energy of 10.71 ± 0.02 MeV were determined. A 286 Mc α–decay chain was recorded down to the spontaneous fission of 266 Db. The spontaneous fission of 279 Rg was observed for the first time in one of four new decay chains of 287 Mc. The excitation function of the reaction was measured at three 48 Ca energies of 242, 250, and 259 MeV; the latter resulted in the first observation of the 5$\textit{n}$–evaporation channel with a cross section of $0.5^{+1.3}_{–0.4}$ pb. The decay properties of 21 previously known odd–$\textit{Z}$ isotopes were improved. The potential for an electron-capture decay mode is discussed for 288 Mc and 284 Nh isotopes. The half-lives of spontaneously fissioning nuclei produced in the 48 Ca–induced reactions with actinide targets are compared with several theoretical predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First experiment at the Super Heavy Element Factory: High cross section of Mc 288 in the Am 243 + Ca 48 reaction and identification of the new isotope Lr 264

Here, we present results of the first experiment aimed at the synthesis of Mc isotopes in the 243 Am+ 48 Ca reaction performed at the new gas-filled separator DGFRS-2 online to the new cyclotron DC280 at the Super Heavy Element Factory at JINR. Fifty-five new decay chains of 288 Mc and six chains assigned to 289 Mc were detected. The α decay of 268 Db with an energy of 7.6–8.0 MeV, half-life of 16$^{+6}_{-4}$h, and a branch of 55$^{+20}_{-15}$% was registered for the first time, and a new spontaneously fissioning isotope 264 Lr with a half-life of 4.9$^{+2.1}_{-1.3}$h was identified. The cross section for the 243 Am( 48 Ca,3n) 288 Mc reaction was measured to be 17.1$^{+6.3}_{-4.7}$ pb, which is the largest value for the known superheavy nuclei at the island of stability.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of 48 Ca-induced reactions with 242 Pu and 238 U targets at the JINR Superheavy Element Factory

Experiments using a 48 Ca beam on 238 U and 242 Pu targets to produce superheavy nuclei were performed at the gas-filled separator DGFRS-2 online to the new cyclotron DC280 at the SHE Factory at JINR. The decay properties of 286 Fl and 287 Fl, as well as their α-decay products, were refined after the detection of 25 and 69 new decay chains, respectively. In addition, 16 decay chains of 283 Cn were observed in the 238 U+ 48 Ca reaction. The possibility of existing of isomeric states in the 287 Fl consecutive α decays is discussed. A new α line with an energy of 100–200 keV lower than the main one at 10.19 MeV was observed for the first time for even-even 286 Fl decay. A maximum cross section of $10.4^{+3.5}_{-2.1}$pb was measured for the 242 Pu( 48 Ca,3n) 287 Fl reaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DGFRS-2—A gas-filled recoil separator for the Dubna Super Heavy Element Factory

The main goal of development of the new Dubna Gas-Filled Recoil Separator (DGFRS-2) is to sufficiently improve the efficiency of studies on heavy and superheavy nuclei at the Super Heavy Element Factory of the Flerov Laboratory of Nuclear Reactions (FLNR) at the Joint Institute for Nuclear Research. The use of beams with the intensity up to 6×10 13 s -1 (10 pμA) delivered by the DC280 cyclotron requires an effective setup providing high suppression of background reaction products. Additionally, the described gas-filled separator is optimized for synthesis and study of heavy isotopes produced in complete fusion reactions of massive nuclei. Basic characteristics of DGFRS-2, as well as the results of the first test experiments, are presented. In comparison to the DGFRS-1, the transmission efficiency was doubled, and the background was reduced by a factor 200.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ar + H{sub 2} Plasma Interacting with Lithium-Filled Capillary Porous Structure

Ar + H{sub 2} plasma interacting with liquid lithium was carried out on a one-cathode linear plasma device (SCU-PSI). The lithium sample was covered with capillary porous structure (CPS). It is found that the electron temperature of applied plasma ranged from ~0–1 eV and electron density ranged from 0.1 × 10{sup 20} to 1 × 10{sup 20} m{sup −3}. The experimental results indicate that a reduction in the electron temperature and the lithium evaporation is found as the percentage of H{sub 2} increases When the ratio of argon and hydrogen keeps constant, the electron temperature and lithium evaporation increase with applied input power, respectively. The retention of hydrogen atoms in lithium surface results in reducing the lithium evaporation. The XRD analysis result shows that during plasma radiation no LiH is formed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effective Pressure Law for the Intrinsic Formation Factor in Low Permeability Sandstones: EPL law for the formation factor

The effective pressure law for the intrinsic formation factor of low permeability sandstones from the Ordos Basin (northwest of China) was studied experimentally by measuring the electrical resistivity of brine saturated rock samples while cycling the pore and confining pressures, p p and p c . We used a 100,000 ppm NaCl solution so that the results could be directly interpreted in terms of the intrinsic formation factor F. The Response Surface method was used to construct a quadratic function of pp and pc fitting the experimental data, from which the coefficient α of the effective pressure law, p eff = p c – αp p , was determined. We found that the coefficient α generally had low values, mainly from 0.2 to 0.4, thus contradicting the theoretical prediction that α should be equal to 1 for scale-invariant properties, such as F, in linear elastic materials having a homogeneous solid matrix. Since the two underlying assumptions, linear elasticity and homogeneity of the solid matrix, are likely violated in reservoir rocks, we tried to assess their effects on α using simple analytical models, based on idealized geometries of the pore and solid phases. Analysis of these models suggests that non-linear elasticity associated with the formation of solid–solid contacts in the compressed rocks (e.g., during closure of rough cracks or crack-like pores along the grain boundaries), may be more effective in producing the low α values observed than inhomogeneity of the solid matrix.

58 GEOSCIENCES↗

Bandgap engineering in van der Waals heterostructures of blue phosphorene and MoS{sub 2}: A first principles calculation

Blue phosphorene (BP) was theoretically predicted to be thermally stable recently. Considering its similar in-layer hexagonal lattice to MoS{sub 2}, MoS{sub 2} could be an appropriate substrate to grow BP in experiments. In this work, the van der Waals (vdW) heterostructures are constructed by stacking BP on top of MoS{sub 2}. The thermal stability and electronic structures are evaluated based on first principles calculations with vdW-corrected exchange-correlation functional. The formation of the heterostructures is demonstrated to be exothermic and the most stable stacking configuration is confirmed. The heterostructures BP/MoS{sub 2} preserve both the properties of BP and MoS{sub 2} but exhibit relatively narrower bandgaps due to the interlayer coupling effect. The band structures can be further engineered by applying external electric fields. An indirect–direct bandgap transition in bilayer BP/MoS{sub 2} is demonstrated to be controlled by the symmetry property of the built-in electric dipole fields. - Graphical abstract: An indirect-direct band gap transition occurs in van der Waals heterostructure of MoS{sub 2}/BP under external electric fields which is demonstrated to be controlled by the symmetry of the built-in electric dipole fields. - Highlights: • The stacking of heterostructures of BP/MoS{sub 2} is demonstrated to be exothermic. • This suggests that it is possible to grow BP using MoS{sub 2} as the substrate. • The band structures of the heterostructures are exploited. • It realizes an indirect–direct gap transition under external electric fields. • The symmetry of the built-in electric dipole fields controls such gap transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Orientation and strain modulated electronic structures in puckered arsenene nanoribbons

Orthorhombic arsenene was recently predicted as an indirect bandgap semiconductor. Here, we demonstrate that nanostructuring arsenene into nanoribbons successfully transform the bandgap to be direct. It is found that direct bandgaps hold for narrow armchair but wide zigzag nanoribbons, which is dominated by the competition between the in-plane and out-of-plane bondings. Moreover, straining the nanoribbons also induces a direct bandgap and simultaneously modulates effectively the transport property. The gap energy is largely enhanced by applying tensile strains to the armchair structures. In the zigzag ones, a tensile strain makes the effective mass of holes much higher while a compressive strain cause it much lower than that of electrons. Our results are crucial to understand and engineer the electronic properties of two dimensional materials beyond the planar ones like graphene.

36 MATERIALS SCIENCE↗

A theoretical study of blue phosphorene nanoribbons based on first-principles calculations

Based on first-principles calculations, we present a quantum confinement mechanism for the band gaps of blue phosphorene nanoribbons (BPNRs) as a function of their widths. The BPNRs considered have either armchair or zigzag shaped edges on both sides with hydrogen saturation. Both the two types of nanoribbons are shown to be indirect semiconductors. An enhanced energy gap of around 1 eV can be realized when the ribbon's width decreases to ∼10 Å. The underlying physics is ascribed to the quantum confinement effect. More importantly, the parameters to describe quantum confinement are obtained by fitting the calculated band gaps with respect to their widths. The results show that the quantum confinement in armchair nanoribbons is stronger than that in zigzag ones. This study provides an efficient approach to tune the band gap in BPNRs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intrinsic ferromagnetism in hexagonal boron nitride nanosheets

Understanding the mechanism of ferromagnetism in hexagonal boron nitride nanosheets, which possess only s and p electrons in comparison with normal ferromagnets based on localized d or f electrons, is a current challenge. In this work, we report an experimental finding that the ferromagnetic coupling is an intrinsic property of hexagonal boron nitride nanosheets, which has never been reported before. Moreover, we further confirm it from ab initio calculations. We show that the measured ferromagnetism should be attributed to the localized π states at edges, where the electron-electron interaction plays the role in this ferromagnetic ordering. More importantly, we demonstrate such edge-induced ferromagnetism causes a high Curie temperature well above room temperature. Our systematical work, including experimental measurements and theoretical confirmation, proves that such unusual room temperature ferromagnetism in hexagonal boron nitride nanosheets is edge-dependent, similar to widely reported graphene-based materials. It is believed that this work will open new perspectives for hexagonal boron nitride spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Indirect-direct band gap transition through electric tuning in bilayer MoS{sub 2}

We investigate the electronic properties of bilayer MoS{sub 2} exposed to an external electric field by using first-principles calculations. It is found that a larger interlayer distance, referring to that by standard density functional theory (DFT) with respect to that by DFT with empirical dispersion corrections, makes indirect-direct band gap transition possible by electric control. We show that external electric field effectively manipulates the valence band contrast between the K- and Γ-valleys by forming built-in electric dipole fields, which realizes an indirect-direct transition before a semiconductor-metal transition happens. Our results provide a novel efficient access to tune the electronic properties of two-dimensional layered materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theory VI. Computational Materials Sciences Network (CMSN)

The Computational Materials Sciences Network (CMSN) is a virtual center consisting of scientists interested in working together, across organizational and disciplinary boundaries, to formulate and pursue projects that reflect challenging and relevant computational research in the materials sciences. The projects appropriate for this center involve those problems best pursued through broad cooperative efforts, rather than those key problems best tackled by single investigator groups. CMSN operates similarly to the DOE Center of Excellence for the Synthesis and Processing of Advanced Materials, coordinated by George Samara at Sandia. As in the Synthesis and Processing Center, the intent of the modest funding for CMSN is to foster partnering and collective activities. All CMSN proposals undergo external peer review and are judged foremost on the quality and timeliness of the science and also on criteria relevant to the objective of the center, especially concerning a strategy for partnering. More details about CMSN can be found on the CMSN webpages at: http://cmpweb.ameslab.gov/ccms/CMSN-homepage.html.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗