Engineering topics

Zhang, Zhengcheng

Publications and source records attributed to Zhang, Zhengcheng.

8 records

DOE OSTI2024

Designer Fluorescent Redoxmer Self‐Reports Side Reactions in Nonaqueous Redox Flow Batteries

The state of health (SOH) is a critical measure for evaluating and predicting performance of redox flow batteries (RFBs). However, diagnosing SOH of RFBs is often challenging due to the overwhelming complexity of the electrolytes and associated electrochemical reactions. Designing active molecules or redoxmers that can autonomously exhibit property changes upon specific stimuli may provide a viable way for early diagnosis of SOH. Herein, a dimerized redoxmer, DGL-N-CH 3 , was designed and synthesized by linking blue-green fluorescent monomers through a diglycolamide linker. While DGL-N-CH 3 still maintains similar electrochemical behavior and strong fluorescence, we observe a unique side reaction when cycling DGL-N-CH 3 in H-cells, which leads to a side product, NHCH 3 -BzNSN via linker cleavage. Interestingly, NHCH 3 -BzNSN also emits fluorescence but at a longer wavelength. By taking advantage of this unique fluorescent change that corresponds to the growth of NHCH 3 -BzNSN, we successfully established the capacity decay of DGL-N-CH 3 H-cell cycling, exemplifying a proof-of-concept self-reporting redoxmer design towards in situ SOH monitoring.

25 ENERGY STORAGE↗

DOE OSTI2024

Impact of Electrolyte Additives on the Lifetime of High Voltage NMC Lithium-Ion Pouch Cells

This work involves improving the lifetime of lithium-ion cells during high voltage cycling using electrolyte additives. Three generations of electrolyte additives were investigated and screened in NMC442/graphite pouch cells using a 24 h voltage-hold protocol at 40 degrees C to accelerate oxidative reactions occurring at 4.4 V. Once promising additives and combinations were identified, they were then tested in cobalt-free NMC640/graphite cells for long-term cycling to upper cutoff voltages of 4.3, 4.4, and 4.5 V at temperatures of 20, 40, and 55 degrees C. Degradation mechanisms were probed using dV/dQ analysis, micro-X-ray fluorescence spectroscopy, and electrochemical impedance spectroscopy. The primary failure mode of cells held at high voltages is due to increase in cell impedance, which is correlated to the dissolution of transition metals, specifically manganese, originating from the positive electrode. We believe this dissolution is presumably due to the formation of a high impedance rock salt surface layer on the NMC positive electrode particles. Such deleterious outcomes can be limited by selecting an appropriate electrolyte additive package. It is hoped that this paper can provide a starting point for developing NMC Li-ion cells that can operate to voltages as high as 4.4 V and still display long lifetimes.

Azam, Saad↗

DOE OSTI2024

High‐Energy LiNiO 2 Li Metal Batteries Enabled by Hybrid Electrolyte Consisting of Ionic Liquid and Weakly Solvating Fluorinated Ether

Abstract In pursuit of the highest possible energy density, researchers shift their focus to the ultimate anode material, lithium metal (Li 0 ), and high‐capacity cathode materials with high nickel content (Ni > 80%). The combination of these aggressive electrodes presents unprecedented challenges to the electrolyte. Here, we report a hybrid electrolyte consisting of a highly fluorinated ionic liquid and a weakly solvating fluorinated ether, whose hybridization structure enables the reversible operation of a battery chemistry based on Li 0 and LiNiO 2 (Ni = 100%), delivering nearly theoretical capacity of the latter (up to 249 mAh g −1 ) for >300 cycles with retention of 78.6% and in absence of unwanted morphological changes in both electrodes. Extensive characterization assisted by molecular dynamic simulation and density functional theory calculations reveals the function of the fluorinated ether to be far more profound than simple dilution and viscosity reduction. Instead, it induces drastic changes in Li + ‐solvation environment, the consequence of which engenders simultaneous stabilization of electrode/electrolyte and interfacing via formation of respective interfacial chemistries. This study further unlocks fundamental knowledge underneath the prevailing “diluent strategy” that is extensively applied by the electrolyte researchers and opens more design space for the next‐generation electrolytes and interphases for these coveted battery chemistries.

25 ENERGY STORAGE↗

DOE OSTI2024

Electrolyte Design for Silicon-Based Li-Ion Battery Guided by Chemical Reactivity of Solvents with a Model Silicon Anode

Here, the use of a model compound trimethylsilyllithium was demonstrated to study the chemical reactions of electrolyte with as a principal guide to design electrolyte for silicon-based Li-ion battery. Me 3 Si - anion initiates ring-opening polymerization of EC leading to the formation of poly(ethylene ether carbonate), which subsequently defragments into oligomers and dissolves in electrolyte. FEC was found to react differently, generating LiF and vinylene carbonate (VC). Further reaction of VC with Me 3 SiLi generated poly(hydroxymethylene), which is a nonsoluble polymer and the critical SEI component. The insights from this study have guided the new electrolyte design for the Si-based battery.

25 ENERGY STORAGE↗

DOE OSTI2024

Stabilizing Graphite Anode in Electrolytes with Nanoscale Anion Networking for High-Rate Lithium Storage

Graphite is the preferred anode material in commercial lithium-ion batteries (LIBs), but its limited compatibility with various organic molecules restricts the electrolyte solvent options. The primary challenge is solvent co-intercalation with Li ions, leading to graphite layer exfoliation. As a result, electrolyte selection often relies on ethylene carbonate (EC)-based solvents. Here, in this study, we introduce electrolytes featuring a nanoscale anion network ordering that hinders the liquid-phase exfoliation of graphite. This network, formed from concentrated long-chain lithium salts, traps free dioxolane (DOL) molecules, reducing the interactions between graphite particles and solvents during Li intercalation. Our findings reveal a mechanism that stabilizes graphite in otherwise unstable solvents with concentrated salts like LiTFSI, providing key insights for improving LIB performance by addressing electrolyte limitations on graphite anodes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

A Fluorinated Lewis Acidic Organoboron Tunes Polysulfide Complex Structure for High–Performance Lithium–Sulfur Batteries

Many challenges in lithium-sulfur (Li–S) batteries are associated with the radical change in lithium polysulfide (LPS) solubility during cycling, but chemical approaches to address such inconsistency are still lacking. Here, the use of a strong Lewis acidic fluorinated organoboron, tri(2,2,2-trifluoroethyl) borate (TFEB), is reported as a multi-functional mediator to simultaneously overcome multiple technical barriers in practical Li–S batteries. TFEB acts as an anion acceptor and forms strong molecular complexes with Lewis basic LPS. The TFEB-LPS complexes have consistent solubility across the full polysulfide spectrum and deliver several times improved better redox kinetics, unlocking a true redox catalytic mechanism that covers the majority of redox events in thick sulfur cathodes. As a result, Li–S batteries evaluated under practical conditions exhibit significantly improved discharge capacity, rate capability, and cycling stability with the addition of the TFEB additive. More importantly, TFEB also contributes to the stabilization of lithium anode in the presence of polysulfides by generating strong interfacial film. These attributes significantly improve the cycling stability of practical Li–S pouch cells, which are assembled with a unit energy density of 219 Wh kg –1 . Finally, the results provide new molecular insights on the design of unlocking solvation networks of practical Li–S systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

Stable, Impermeable Hexacyanoferrate Anolyte for Nonaqueous Redox Flow Batteries

Redox-active molecules, or redoxmers, in nonaqueous redox flow batteries often suffer from membrane crossover and low electrochemical stability. Transforming inorganic polyionic redoxmers established for aqueous batteries into nonaqueous candidates is an attractive strategy to address these challenges. Here, in this study, we demonstrate such tailoring for hexacyanoferrate (HCF) by pairing the anions with tetra-n-butylammonium cation (TBA + ). TBA 3 HCF has good solubility in acetonitrile and >1 V lower redox potential vs the aqueous counterpart; thus, the familiar aqueous catholyte becomes a new nonaqueous anolyte. The lowering of redox potential correlates with replacement of water by acetonitrile in the solvation shell of HCF, which can be traced to H-bond formation between water and cyanide ligands. Symmetric flow cells indicate exceptional stability of HCF polyanions in nonaqueous electrolytes and Nafion membranes completely block HCF crossover in full cells. Ion pairing of metal complexes with organic counterions can be effective for developing promising redoxmers for nonaqueous flow batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Ionic liquid electrolyte for lithium-ion batteries

The ionic liquids disclosed herein are salts comprising a nitrogen or phosphorus such as a quaternary ammonium ion, a quaternary phosphonium ion, or an N-alkylated nitrogen heterocycle, and which include at least one functional substituent, e.g., a fluoro, cyano, carbonate ester, an alkenyl group, or an alkynyl group bonded to a carbon atom the cation. In a preferred embodiment, the cation is represented by the structure of Formula (I) as described herein.

Zhang, Zhengcheng↗