Whether a Theory of Nuclear Safety is deterministic or probabilistic? A metatheory
Not Available
Zheng, Gangyang↗
Engineering topics
Zhang, Zhijian
Publications and source records attributed to Zhang, Zhijian.
A simulation of a steam generator tube rupture in AP1000 nuclear power plant based on RELAP5-MV
In the operation of nuclear power plants, it is very important to evaluate different accident scenarios in actual plant conditions with different codes. In the field of nuclear safety, steam generator tube rupture (SGTR) is one of the main accidents. In this research, transient analysis of the primary system variation of thermo-hydraulics parameters in primary loop under SGTR accident in AP1000 nuclear power plant (NPP) is analyzed by Relap5-MV thermo-hydraulics code. The transient test scenario is modeled using the RELAP5-MV for the AP1000 NPP. The calculation was performed up to a transient time of 3,000.0 s. The results obtained from RELAP5 and RELAP5-MV are in agreement as they are based on the same models though in comparison with RELAP5, RELAP5-MV makes simulation of nuclear power systems easier and convenient for users most especially beginners. (authors)
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Multiple RANS Scheme for the CFD Simulation of PWR
Though best-estimate system codes have been well established, the assumptions for the simplification of the conservation equations will be invalid when 3D effects play an important role in the object. The inner domain of PWR can create high 3D effects because of the disturbance of mixing vanes and the complex distribution of flow resistance. With the finest mesh to study the flow and heat transfer process of a nuclear reactor, a CFD simulation can give a perfect understanding of the physical processes in a whole reactor. However, more than 10 thousands of subchannels exist in a typical pressurized water reactor (PWR). These subchannels are narrow, comprising complex spacer grids and mixing vanes. The need of both the computational resources and the simulation time is great, which is not good for the simulation efficiency. However, the efficiency is critical for the CFD simulation of a PWR. It is meaningless if the simulation does not end. To improve the efficiency, one approach is to well consider the turbulence model used in a CFD simulation, because some models are complex and require great computing resources and time. On the contrary, some models are simple, but are also suitable to reflect the physical status in a PWR. Furthermore, the effects of the typical structures of PWR should also be clarified. They are closely related to the flow mechanism. The CFD simulation may be simplified by such effects. The objective of this research is to study the flow characteristics affected by the turbulence models and typical structures. The authors then design a scheme based on the regularities of the flow characteristics to improve the efficiency of the CFD simulation for PWR. By this research, we found: 1) The mixing vanes, a typical structure of a PWR, make the anisotropic eddy viscosity cannot be ignored for the region with short distance downstream of this structure; 2) Outside of this region, the RANS models, regardless of whether they are isotropic or anisotropic, can obtain similar results. To improve the simulation efficiency, a CFD scheme is designed by the hybrid application of multiple RANS models (MRANS). In this scheme, the major domain with low anisotropic viscosity uses the turbulence model which requires the least time. The difference is just little in the comparison with a simulation using the anisotropic RANS model for the whole computational domain. The MRANS scheme thus will be significant to improve the efficiency of the CFD simulation for a whole PWR.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Housefly Larva Vermicomposting Efficiently Attenuates Antibiotic Resistance Genes in Swine Manure, with Concomitant Bacterial Population Changes
Manure from swine treated with antimicrobials as feed additives is a major source for the expansion of the antibiotic resistance gene (ARG) reservoir in the environment. Vermicomposting via housefly larvae ( Musca domestica ) can be efficiently used to treat manure and regenerate biofertilizer, but few studies have investigated its effect on ARG attenuation. Here, we tracked the abundances of 9 ARGs and the composition and structure of the bacterial communities in manure samples across 6 days of full-scale manure vermicomposting. On day 6, the abundances of genes encoding tetracycline resistance [ tet (M), tet (O), tet (Q), and tet (W)] were reduced ( P < 0.05), while those of genes encoding sulfonamide resistance ( sul1 and sul2 ) were increased ( P < 0.05) when normalized to 16S rRNA. The abundances of tetracycline resistance genes were correlated ( P < 0.05) with the changing concentrations of tetracyclines in the manure. The overall diversity and richness of the bacteria significantly decreased during vermicomposting, accompanied by a 100 times increase in the relative abundance of Flavobacteriaceae spp. Variations in the abundances of ARGs were correlated with the changing microbial community structure and the relative abundances of the family Ruminococcaceae , class Bacilli , or phylum Proteobacteria . Vermicomposting, as a waste management practice, can reduce the overall abundance of ARGs. More research is warranted to assess the use of this waste management practice as a measure to attenuate the dissemination of antimicrobial residues and ARGs from livestock production before vermicompost can be safely used as biofertilizer in agroecosystems.
Wang, Hang↗
On-fiber plasmonic interferometer for multi-parameter sensing
We demonstrate a novel miniature multi-parameter sensing device based on a plasmonic interferometer fabricated on a fiber facet in the optical communication wavelength range. This device enables the coupling between surface plasmon resonance and plasmonic interference in the structure, which are the two essential mechanisms for multi-parameter sensing. We experimentally show that these two mechanisms have distinctive responses to temperature and refractive index, rendering the device the capability of simultaneous temperature and refractive index measurement on an ultra-miniature form factor. A high refractive index sensitivity of 220 nm per refractive index unit (RIU) and a high temperature sensitivity of –60 pm/ °C is achieved with our device.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗