Search NASA⌕ Search

Engineering topics

Zhang, Zhuoran

Publications and source records attributed to Zhang, Zhuoran.

Review of solar-enabled desalination and implications for zero-liquid-discharge applications

Abstract The production of freshwater from desalinating abundant saline water on the planet is increasingly considered a climate change adaptation measure. Yet, there are challenges associated with the high cost, intensive energy demand, and environmental implications of desalination. Effective integration of solar energy generation and freshwater production can address both issues. This review article highlights recent key advances in such integration achieved in a joint-research university-national laboratory partnership under the auspices of the United States Department of Energy and parallel efforts worldwide. First, an overview of current and emerging desalination technologies and associated pretreatment, brine treatment, and valorization technologies that together can result in zero-liquid-discharge systems is presented, and their technological readiness levels are evaluated. Then, advanced modeling techniques and new software platforms that enable optimization of solar-desalination applications with the dual objective of cost and environmental impact minimization are discussed.

14 SOLAR ENERGY↗

WaterTAP 0.10 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗

WaterTAP 0.8 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗

WaterTAP 0.7 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗

A solar energy desalination analysis tool, sedat, with data and models for selecting technologies and regions

Abstract There is interest for desalination technologies powered by solar energy as arid areas are typically bestowed with good solar potential. In response to a US DOE call for solar desalination analysis tools, we developed an open-source solar energy desalination analysis tool, sedat , for techno-economical evaluation of desalination technologies and selection of regions with the highest potential for using solar energy to power desalination plants. It is expected that this software will simplify the planning, design, and valuation of solar desalination systems in the U.S. and worldwide. Sedat uses Dash for integrating various layers of large volumes of GIS data with Python-based models of solar energy generation and desalination technologies. It derives time-series of energy generation and water production, with details of plant performance and suggestions for improving the solar-desalination coupling. This paper summarizes the various phases of the tool’s development, presents example results showing the potential, under multiple objectives, of solar desalination in parts of the U.S. southwest, and discusses method details that would be useful for future model development.

14 SOLAR ENERGY↗

Comparative techno-economic assessment of osmotically-assisted reverse osmosis and batch-operated vacuum-air-gap membrane distillation for high-salinity water desalination

New developments in pressure- and thermally driven membrane desalination technologies offer the potential to cost-effectively treat high-salinity waters, especially when powered by low-cost solar electricity and thermal energy. This paper presents a comparative techno-economic assessment of the state-of-the-art most promising pressure- and thermally driven membrane technologies for high recovery desalination, namely, osmotically-assisted reverse osmosis (OARO) and batch-operated vacuum-air-gap membrane distillation (batch V-AGMD), to produce potable water while concentrating brine within the range of 140–290 g/L TDS for minimum-liquid-discharge (MLD) and zero-liquid-discharge (ZLD) applications. It is shown that both OARO and batch V-AGMD can treat feedwater and brines with TDS in the range of 30–125 g/L with corresponding fresh water recovery rates of 85–25%. When low cost solar electricity and thermal energy are used, the resulting levelized cost of water (LCOW) from OARO is in the range of 0.70–6.28 $/m 3 , and that from batch-V-AGMD is in the range of 1.74–2.77 $/m 3 . OARO is more cost-effective than batch V-AGMD when feedwater salinity is below 70 g/L and recovery below 75%, whereas batch V-AGMD is more cost-effective at higher recovery rates and salinity levels. Finally, the sensitivity of this comparison on energy prices and module costs is discussed.

42 ENGINEERING↗

Integrating Solar Energy, Desalination, and Electrolysis

Solar electricity enables the advancement and deployment of technologies that are strongly influenced by clean energy availability and cost. The economics of both desalination and hydrogen production from water electrolysis are dominated by the cost of energy, and the availability of inexpensive solar energy creates markets and offers incentives to the desalination and electrolyzer industries. In this report the production of high-purity water and hydrogen from seawater is focused on. Current electrolyzers require deionized water so they need to be coupled with desalination units. It is shown that such coupling is cost effective in hydrogen generation, and it also offers benefits to thermal desalination, which can utilize waste heat from electrolysis. Furthermore, such coupling can be optimized when electrolyzers operate at high current density, using low-cost solar and/or wind electricity, as such operation increases both hydrogen production and heat generation. Results of technoeconomic modeling of polymer electrolyte membrane electrolyzers define thresholds of electricity pricing, current density, and operating temperature that make clean electrolytic hydrogen cost competitive with hydrogen from steam methane reforming (SMR). By using 2020 hourly electricity pricing in California and Texas, it is estimated that hydrogen can be produced from seawater in coupled desalination-electrolyzer systems at prices near $2 kg -1 H 2 , reaching cost parity with hydrogen produced from SMR.

14 SOLAR ENERGY↗

Partial Fluorination as a Strategy for Crystal Engineering of Rubrene Derivatives

Through a close examination of the intermolecular interactions of rubrene (1a) and select derivatives (1b–1p), a clearer understanding of why certain fluorinated rubrene derivatives pack with planar tetracene backbones has been achieved. In this study we synthesized, crystallized, and determined the packing structure of new rubrene derivatives (1h–p). Previously, we proposed that introducing electron-withdrawing CF3 substituents induced planarity by reducing intramolecular repulsion between the peripheral aryl groups (1e–g). However, we found that in most cases, further increasing the fluorine content of rubrene lead to twisted tetracene backbones in the solid state. To understand how rubrene (1a) and its derivatives (1b–p) pack in the solid state, we (re)examined the crystal structures through a systematic study of the close contacts. We found that planar tetracene cores occur when close contacts organize to produce an S symmetry element about a given rubrene molecule. Here, we report the first instance of rubrene derivatives (1l and 1n) that pack in a two-dimensional brick motif. The prospects for new rubrene derivatives in semiconductors were estimated by calculating the reorganization energies of the monomers and transfer integrals of the dimers we observed. Our work allows for the rational design and improved crystal engineering of new rubrene derivatives.

36 MATERIALS SCIENCE↗