Search NASA⌕ Search

Engineering topics

Zhao, Changtai

Publications and source records attributed to Zhao, Changtai.

Ionic Conductive and Highly-Stable Interface for Alkali Metal Anodes

Alkali metals are regarded as the most promising candidates for advanced anode for the next-generation batteries due to their high specific capacity, low electrochemical potential, and lightweight. However, critical problems of the alkali metal anodes, especially dendrite formation and interface stabilization, remain challenging to overcome. The solid electrolyte interphase (SEI) is a key factor affecting Li and Na deposition behavior and electrochemical performances. Herein, a facile and universal approach is successfully developed to fabricate ionic conductive interfaces for Li and Na metal anodes by modified atomic layer deposition (ALD). In this process, the Li metal (or Na metal) plays the role of Li (or Na) source without any additional Li (or Na) precursor during ALD. Moreover, the key questions about the influence of ALD deposition temperature on the compositions and structure of the coatings are addressed. The optimized ionic conductive coatings have significantly improved the electrochemical performances. In addition, the electrochemical phase-field model is performed to prove that the ionic conductive coating is very effective in promoting uniform electrodeposition. Further, this approach is universal and can be potentially applied to other different metal anodes. At the same time, it can be extended to other types of coatings or other deposition techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the electronic origin of enhancing the catalytic activity of Co 3 O 4 for oxygen evolution by single atom ruthenium

The surface electronic structure of transition-metal oxide catalysts plays a decisive role in binding the intermediates of the oxygen evolution reaction (OER) to the oxide surface, in turn influencing the catalytic activity of these materials. However, the approaches to modulating the electronic structure of surface metal ions are rare and far behind the demands. Here, we report a surface single atom decoration for adjusting the surface electronic structure of Co 3 O 4 , leading to enhanced electrocatalytic activity for OER, in which the isolated Ru single atoms were uniformly deposited on the surface of Co 3 O 4 by an atomic layer deposition technology. As the OER catalyst, the as-made catalysts have exhibited a significantly enhanced catalytic activity (with increasing to 95.5 times) and a dramatically decreased overpotential. The density functional theory calculations reveal that the single-atom Ru acts as a promotor to adjust the 3d electronic structure of adjacent Co atoms and to tune the binding energy between intermediates and activity sites, finally leading to enhanced catalytic activity.

36 MATERIALS SCIENCE↗

Unveiling the critical role of interfacial ionic conductivity in all-solid-state lithium batteries

Advancement of all-solid-state lithium-ion (Li + ) batteries (ASSLIBs) has been hindered by the large interfacial resistance mainly originating from interfacial reactions between oxide cathodes and solid-state sulfide electrolytes (SEs). To suppress the interfacial reactions, an interfacial coating layer between cathodes and SEs is indispensable. However, the kinetics of interfacial Li + transport across the coating layer has not been well understood yet. Herein, we tune the interfacial ionic conductivity of the coating layer LiNb 0.5 Ta 0.5 O 3 (LNTO) by manipulating post-annealing temperature. It is found that the interfacial ionic conductivity determines interfacial Li + transport kinetics and enhancing the interfacial ionic conductivity can significantly boost the electrochemical performance of SE-based ASSLIBs. A representative cathode LiNi 0.5 Mn 0.3 Co 0.2 O 2 coated by LNTO with the highest interfacial ionic conductivity exhibits a high initial capacity of 152 mAh.g -1 at 0.1 C and 107.5 mAh.g -1 at 1C. This work highlights the importance of increasing interfacial ionic conductivity for high-performance SE-based ASSLIBs.

25 ENERGY STORAGE↗

Single crystal cathodes enabling high-performance all-solid-state lithium-ion batteries

All-solid-state lithium-ion batteries (ASSLIBs) are receiving significant attention owing to their improved safety and energy density over liquid counterparts. However, single-crystal cathodes have never been investigated in ASSLIBs. In this work, single-crystal Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 (SC-NMC532) is used as the cathode material for ASSLIBs, which exhibits 6~14 times higher Li + diffusion coefficient than polycrystalline Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 (PC-NMC532). As a result, SC-NMC532 exhibits an initial specific capacity of 156.4 mAh.g -1 while PC-NMC532 shows an initial capacity of only 127.5 mAh.g -1 . After 150 cycles, SC-NMC532 retains the capacity of 94.5 mAh.g -1 . More impressively, under a high current density of 1.3 mA.cm -2 , SC-NMC532 exhibits a capacity of 82 mAh.g -1 , much higher than that of PC-NMC532 (2.1 mAh.g -1 ). This work demonstrates that single-crystal NMC cathodes could enable both high power density and high energy density of ASSLIBs.

25 ENERGY STORAGE↗

Surface‐Confined Fabrication of Ultrathin Nickel Cobalt‐Layered Double Hydroxide Nanosheets for High‐Performance Supercapacitors

Abstract The design and fabrication of 2D nanostructure electrodes with desired electrochemical activities is highly demanded for electrocatalysis and supercapacitors. Herein, the tuned fabrication of ultrathin and tortuous nickel/cobalt‐layered double hydroxide (NiCo‐LDH) nanosheets via a graphene oxide (GO) surface‐confined strategy is reported, yielding nanosheets with a thickness of 1.7–1.8 nm that is duplicated from the graphene oxides in terms of both the lateral size and the shape. It has been found that the C/O functional groups on the GO surface have functioned to promote the oxidation of Co 2+ to Co 3+ , and to transform the β‐phase NiCo‐hydroxide (NiCo‐OH) into the LDH‐phase with tuned homogenous composition and geometry. The ultrathin NiCo‐LDH nanosheets mimic the morphology and size of the graphene due to the surface‐confined and/or surface‐guided growth. The as‐obtained NiCo‐LDH‐graphene (NiCo‐LDH‐G) nanosheets exhibit a superior electrocatalytic activity for oxygen evolution reaction, evidenced by a small overpotential of 0.337 V (@10 mA cm −2 in 0.1 m KOH electrolyte), and a high charge storage capability of 1489 F g −1 as electrodes for supercapacitors. This 2D surface‐confined growth strategy may pave a way for the fabrication of ultrathin 2D materials including but not limited to transition metal hydroxides for high‐performance electrochemical applications.

Yang, Juan↗