Search NASA⌕ Search

Engineering topics

Zhao, Huimin

Publications and source records attributed to Zhao, Huimin.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Metabolic engineering of oleaginous yeast Rhodotorula toruloides for overproduction of triacetic acid lactone

Abstract The plant‐sourced polyketide triacetic acid lactone (TAL) has been recognized as a promising platform chemical for the biorefinery industry. However, its practical application was rather limited due to low natural abundance and inefficient cell factories for biosynthesis. Here, we report the metabolic engineering of oleaginous yeast Rhodotorula toruloides for TAL overproduction. We first introduced a 2‐pyrone synthase gene from Gerbera hybrida ( GhPS ) into R. toruloides and investigated the effects of different carbon sources on TAL production. We then systematically employed a variety of metabolic engineering strategies to increase the flux of acetyl‐CoA by enhancing its biosynthetic pathways and disrupting its competing pathways. We found that overexpression of ATP‐citrate lyase (ACL1) improved TAL production by 45% compared to the GhPS overexpressing strain, and additional overexpression of acetyl‐CoA carboxylase (ACC1) further increased TAL production by 29%. Finally, we characterized the resulting strain I12‐ ACL1‐ACC1 using fed‐batch bioreactor fermentation in glucose or oilcane juice medium with acetate supplementation and achieved a titer of 28 or 23 g/L TAL, respectively. This study demonstrates that R. toruloides is a promising host for the production of TAL and other acetyl‐CoA‐derived polyketides from low‐cost carbon sources.

2‐pyrone synthase↗
DOE OSTI2022

Data for Metabolic Engineering of Oleaginous Yeast Rhodotorula toruloides for Overproduction of Triacetic Acid Lactone

The plant-sourced polyketide triacetic acid lactone (TAL) has been recognized as a promising platform chemical for the biorefinery industry. However, its practical application was rather limited due to low natural abundance and inefficient cell factories for biosynthesis. Here, we report the metabolic engineering of oleaginous yeast Rhodotorula toruloides for TAL overproduction. We first introduced a 2-pyrone synthase gene from Gerbera hybrida (GhPS) into R. toruloides and investigated the effects of different carbon sources on TAL production. We then systematically employed a variety of metabolic engineering strategies to increase the flux of acetyl-CoA by enhancing its biosynthetic pathways and disrupting its competing pathways. We found that overexpression of ATP-citrate lyase (ACL1) improved TAL production by 45% compared to the GhPS overexpressing strain, and additional overexpression of acetyl-CoA carboxylase (ACC1) further increased TAL production by 29%. Finally, we characterized the resulting strain I12-ACL1-ACC1 using fed-batch bioreactor fermentation in glucose or oilcane juice medium with acetate supplementation and achieved a titer of 28 or 23 g/L TAL, respectively. This study demonstrates that R. toruloides is a promising host for the production of TAL and other acetyl-CoA-derived polyketides from low-cost carbon sources.

Conversion↗
DOE OSTI2022

Photoinduced chemomimetic biocatalysis for enantioselective intermolecular radical conjugate addition

Exploiting nature’s catalysts for non-natural transformations that are inaccessible to chemocatalysis is highly desirable but challenging. On the one hand, the widespread nicotinamide-dependent oxidoreductases have not been utilized for single-electron-transfer-induced bimolecular cross-couplings; on the other, the addition of catalytic asymmetric radical con- jugate to terminal alkenes remains a challenge owing to strong racemic background reaction and unselective termination of prochiral radical species. Here we report a chemomimetic biocatalysitic approach for construction of alpha-carbonyl stereocentres via an unnatural intermolecular conjugate addition of N-(acyloxy)phthalimides-derived radicals with acceptor-substituted terminal alkenes, by combination of visible-light excitation and nicotinamide-dependent ketoreductases (KREDs). Based on protein crystal structure, we engineered KREDs via a semi-rational mutagenesis strategy to improve reaction outcomes with a small and high-quality variants library. Here, mechanistic investigations combining wet experiments, crystallographic studies and computational simulations demonstrate that the repurposed biocatalyst can suppress racemic background reaction and unselected side reactions, yielding enantioselectivity that is challenging to achieve by chemocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

fpikachu96/KRED-data

Exploiting nature’s catalysts for non-natural transformations that are inaccessible to chemocatalysis is highly desirable but challenging. On the one hand, the widespread nicotinamide-dependent oxidoreductases have not been utilized for single-electron-transfer-induced bimolecular cross-couplings; on the other, the addition of catalytic asymmetric radical conjugate to terminal alkenes remains a challenge owing to strong racemic background reaction and unselective termination of prochiral radical species. Here we report a chemomimetic biocatalysitic approach for construction of alpha-carbonyl stereocentres via an unnatural intermolecular conjugate addition of N-(acyloxy)phthalimides-derived radicals with acceptor-substituted terminal alkenes, by combination of visible-light excitation and nicotinamide-dependent ketoreductases (KREDs). Based on protein crystal structure, we engineered KREDs via a semi-rational mutagenesis strategy to improve reaction outcomes with a small and high-quality variants library. Mechanistic investigations combining wet experiments, crystallographic studies and computational simulations demonstrate that the repurposed biocatalyst can suppress racemic background reaction and unselected side reactions, yielding enantioselectivity that is challenging to achieve by chemocatalysis.

Huang, Xiaoqiang↗
DOE OSTI2022

Photobiocatalysis for Abiological Transformations

Harnessing biocatalysts for novel abiological transformations is a longstanding goal of synthetic chemistry. Combining the merits of biocatalysis and photocatalysis allows for selective transformations fueled by visible light and offers many advantages including new reactivity, high enantioselectivity, greener syntheses, and high yields. Photoinduced electron or energy transfer enables synthetic methodologies that complement conventional two electron processes or offer orthogonal pathways for developing new reactions. Enzymes are well suited and can be tuned by directed evolution to exert control over radical intermediates thereby suppressing undesirable reactions and delivering high chemo- and stereoselectivities. Within the past decade, the combination of biocatalysis and photocatalysis was mainly focused on exploiting light-regenerated cofactors to increase native enzymatic activity. However, recent developments have demonstrated that the combination can unlock new-to-nature chemistry. Particularly, the discovery and application of new strategies are well poised to expand the applications of photobiocatalysis. In the past three years, our lab has been studying the combinations of photocatalysis and biocatalysis which can be applied to create new synthetic methodologies and solve challenges in synthetic organic chemistry. Our efforts have expanded the strategies for combining external photocatalysts with enzymes through the construction of a synergistic cooperative stereoconvergent reduction system consisting of photosensitized energy transfer and ene-reductase catalyzed alkene reduction. Additionally, our efforts have also extended the capability of cofactor-dependent photoenzymatic systems to include enantioselective bimolecular radical hydroalkylations of alkenes by irradiating electron donor-acceptor complexes comprised of enzymatic redox active cofactors and unnatural substrates. In this Account, we highlight strategies developed by our group and others for combining biocatalysis and photocatalysis with the aim of introducing nonnatural reactivity to enzymes. Presently, strategies applied to achieve this goal include the repurposing of newly discovered photoactive enzymes, the elucidation of new photoreactivity within cofactor-dependent enzymes, the combination of external photocatalysts with enzymes, and the construction of artificial photoenzymes. By demonstrating the successful application of these strategies for achieving selective new-to-nature transformations, we hope to spur interest in the expanding the scope of photobiocatalytic systems through the use and extension of these strategies and creation of new strategies. In addition, we hope to elucidate the intuition in synergizing the unique capabilities of biocatalysis and photocatalysis so that photobiocatalysis can be recognized as a potential solution to difficult challenges in synthetic organic chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Data for Metabolic Engineering of Rhodotorula toruloides IFO0880 Improves C16 and C18 Fatty Alcohol Production from Synthetic Media

The oleaginous, carotenogenic yeast Rhodotorula toruloides has been increasingly explored as a platform organism for the production of terpenoids and fatty acid derivatives. Fatty alcohols, a fatty acid derivative widely used in the production of detergents and surfactants, can be produced microbially with the expression of a heterologous fatty acyl-CoA reductase. Due to its high lipid production, R. toruloides has high potential for fatty alcohol production, and in this study several metabolic engineering approaches were investigated to improve the titer of this product. Fatty acyl-CoA reductase from Marinobacter aqueolei was co-expressed with SpCas9 in R. toruloides IFO0880 and a panel of gene overexpressions and Cas9-mediated gene deletions were explored to increase the fatty alcohol production. Two overexpression targets (ACL1 and ACC1, improving cytosolic acetyl-CoA and malonyl-CoA production, respectively) and two deletion targets (the acyltransferases DGA1 and LRO1) resulted in significant (1.8 to 4.4-fold) increases to the fatty alcohol titer in culture tubes. Combinatorial exploration of these modifications in bioreactor fermentation culminated in a 3.7 g/L fatty alcohol titer in the LRO1Δ mutant. As LRO1 deletion was not found to be beneficial for fatty alcohol production in other yeasts, a lipidomic comparison of the DGA1 and LRO1 knockout mutants was performed, finding that DGA1 is the primary acyltransferase responsible for triacylglyceride production in R. toruloides , while LRO1 disruption simultaneously improved fatty alcohol production, increased diacylglyceride and triacylglyceride production, and increased glucose consumption. The fatty alcohol titer of fatty acyl-CoA reductase-expressing R. toruloides was significantly improved through the deletion of LRO1, or the deletion of DGA1 combined with overexpression of ACC1 and ACL1. Disruption of LRO1 surprisingly increased both lipid and fatty alcohol production, creating a possible avenue for future study of the lipid metabolism of this yeast.

Conversion↗
DOE OSTI2021

PlasmidMaker: a Versatile, Automated, and High Throughput End-to-End Platform for Plasmid Construction

Plasmids are used extensively in basic and applied biology. However, design and construction of plasmids, specifically the ones carrying complex genetic information, remains one of the most time-consuming, labor-intensive, and rate-limiting steps in performing sophisticated biological experiments. Here, we report the development of a versatile, robust, automated end-to-end platform named PlasmidMaker that allows error-free construction of plasmids with virtually any sequences in a high-throughput manner. This platform consists of a most versatile DNA assembly method using Pyrococcus furiosus Argonaute ( Pf Ago)-based artificial restriction enzymes, a user-friendly frontend for plasmid design, and a backend that streamlines the workflow and integration with a robotic system. As a proof of concept, we used this platform to generate ~100 plasmids from six different species ranging from 5 to 18 kb in size from up to 11 DNA fragments within 3 days. PlasmidMaker should greatly expand the potential of synthetic biology.

Enghiad, Behnam↗
DOE OSTI2021

TriGORank: A Gene Ontology Enriched Learning-to-Rank Framework for Trigenic Fitness Prediction

Machine learning (ML) has been gaining interest in the metabolic engineering community as a means to automate prediction tasks. In this work, we introduce and study the task of using ML to recommend high-fitness triplet mutants as candidates for wet-lab experiments. We first utilize individual fitness and digenic fitness scores as features and train machine learning models that produce a ranked list, from high to low fitness scores, for triplet gene mutants of S. cerevisiae. Then, we incorporate prior metabolic knowledge from an existing gene ontology, by designing a novel graph representation and deducing features that can capture gene similarity and gene interactions. Lastly, experimental results show that our proposed gene ontology enriched model, termed TriGORank, improves both performance and explainability.

Labhishetty, Sahiti↗
DOE OSTI2021

Engineering robust microorganisms for organic acid production

Abstract Organic acids are an important class of compounds that can be produced by microbial conversion of renewable feedstocks and have huge demands and broad applications in food, chemical, and pharmaceutical industries. An economically viable fermentation process for production of organic acids requires robust microbial cell factories with excellent tolerance to low pH conditions, high concentrations of organic acids, and lignocellulosic inhibitors. In this review, we summarize various strategies to engineer robust microorganisms for organic acid production and highlight their applications in a few recent examples.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Cloning and characterization of a panel of mitochondrial targeting sequences for compartmentalization engineering in Saccharomyces cerevisiae

Mitochondrion is generally considered as the most promising subcellular organelle for compartmentalization engineering. Much progress has been made in reconstituting whole metabolic pathways in the mitochondria of yeast to harness the precursor pools (i.e., pyruvate and acetyl-CoA), bypass competing pathways, and minimize transportation limitations. However, only a few mitochondrial targeting sequences (MTSs) have been characterized (i.e., MTS of COX4), limiting the application of compartmentalization engineering for multigene biosynthetic pathways in the mitochondria of yeast. In the present study, based on the mitochondrial proteome, a total of 20 MTSs were cloned and the efficiency of these MTSs in targeting heterologous proteins, including the Escherichia coli FabI and enhanced green fluorescence protein (EGFP) into the mitochondria was evaluated by growth complementation and confocal microscopy. After systematic characterization, six of the well!performed MTSs were chosen for the colocalization of complete biosynthetic pathways into the mitochondria. As proof of concept, the full alpha-santalene biosynthetic pathway consisting of 10 expression cassettes capable of converting acety coA to alpha-santalene was compartmentalized into the mitochondria, leading to a 3.7 fold improvement in the production of alpha-santalene. Furthermore, the newly characterized MTSs should contribute to the expanded metabolic engineering and synthetic biology toolbox for yeast mitochondrial compartmentalization engineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Data for Cloning and Characterization of a Panel of Mitochondrial Targeting Sequences for Compartmentalization Engineering in Saccharomyces cerevisiae

Mitochondrion is generally considered as the most promising subcellular organelle for compartmentalization engineering. Much progress has been made in reconstituting whole metabolic pathways in the mitochondria of yeast to harness the precursor pools (i.e., pyruvate and acetyl-CoA), bypass competing pathways, and minimize transportation limitations. However, only a few mitochondrial targeting sequences (MTSs) have been characterized (i.e., MTS of COX4), limiting the application of compartmentalization engineering for multigene biosynthetic pathways in the mitochondria of yeast. In the present study, based on the mitochondrial proteome, a total of 20 MTSs were cloned and the efficiency of these MTSs in targeting heterologous proteins, including the Escherichia coli FabI and enhanced green fluorescence protein (EGFP) into the mitochondria was evaluated by growth complementation and confocal microscopy. After systematic characterization, six of the well-performed MTSs were chosen for the colocalization of complete biosynthetic pathways into the mitochondria. As proof of concept, the full α-santalene biosynthetic pathway consisting of 10 expression cassettes capable of converting acetyl-coA to α-santalene was compartmentalized into the mitochondria, leading to a 3.7-fold improvement in the production of α-santalene. The newly characterized MTSs should contribute to the expanded metabolic engineering and synthetic biology toolbox for yeast mitochondrial compartmentalization engineering.

Conversion↗